Triple M

Triple M Triple M is the machining & manufacturing division of the Jim Stokes Workshops Group.

Offering the full range of design, development, engineering and machining services using state of the art CNC and 5 axis technology for one off and batch work.

Just before Christmas Alistair completed this Alfa Romeo 3000CM sump for a new engine that we are creating. From solid b...
06/01/2026

Just before Christmas Alistair completed this Alfa Romeo 3000CM sump for a new engine that we are creating. From solid billet to two piece sump took around 40 hours of precision machining and is now ready for final finishing before being united with the rest of the engine.

There is very little that cannot be created from billet and if a one off or short production run is required then it becomes a very effective process. If you need parts, of whatever type, creating for a project get in touch to find out how we might be able to help.

Triple M is now closed until the 5th January. We would like to take this opportunity to thank all of our customers, supp...
24/12/2025

Triple M is now closed until the 5th January.

We would like to take this opportunity to thank all of our customers, suppliers and associate organisations for making 2025 so successful and we are already looking forward to another busy year in 2026.

We would finally like to wish everyone a very Merry Christmas and a Happy New year!

Regards
The JSW Group team

Another fantastic service that we offer and that often allows important original components to continue to be used, is L...
13/11/2025

Another fantastic service that we offer and that often allows important original components to continue to be used, is Lock & Stitch. Here a pre-war cylinder block with a substantial crack is repaired using this revolutionary process by Nigel one of our engineers.

Precision machining doesn't get much more 'precision' than gearing. This is for a project in our workshop, but contact u...
04/11/2025

Precision machining doesn't get much more 'precision' than gearing. This is for a project in our workshop, but contact us if you have requirements for this, or any kind of, machining, engineering, batch production or design services.

Jim was joined this morning by Ashleigh and Steve from St Wilfrid's Hospice ( www.stwh.co.uk ) to receive a cheque for £...
07/10/2025

Jim was joined this morning by Ashleigh and Steve from St Wilfrid's Hospice ( www.stwh.co.uk ) to receive a cheque for £7500 that the JSW Group raised during our annual Classics & Coffee event, separate donations and a corporate event that we hosted for Allica Bank . We would like to thank the many people who visited us and contributed to this fantastic total, the JSW team who give their time to make events happen and the owner of the stunning E-Type who gave permission for it's use today.

Having experienced durability issues with the available starter motors for the Alfa Romeo 6C 1750 we took the decision t...
09/06/2025

Having experienced durability issues with the available starter motors for the Alfa Romeo 6C 1750 we took the decision to manufacture our own. Following the design, prototyping and testing process the initial batch of JSW 6C 1750 Starter Motors have now been made in our machine shop, assembled and are available now. We will be carrying some of these during the 1000 Miglia, which starts in less than 2 weeks, should any of our fellow participants require one during the event, or they are available from stock via our parts department (with a choice of pinion to suit different flywheels) for immediate dispatch.

We are very pleased to announce that the JSW Group annual Classics & Coffee event, in support of St Wilfrid's Hospice, i...
16/04/2025

We are very pleased to announce that the JSW Group annual Classics & Coffee event, in support of St Wilfrid's Hospice, is being sponsored once again by Howden Insurance. We have a great relationship with so to have them as principal sponsors of our event for the second time is great news, primarily for our adopted charity. Open from 10am on Sunday 20th July we are hoping for a great turn out, so bring your classic car, bike, commercial or 4x4 down to our workshops in Waterlooville, grab a coffee and enjoy a morning of chat, interesting cars and engineering. www.howdeninsurance.co.uk

The 2025 edition of is almost upon us, our stand is ready, the two cars are ready to be revealed and we have a fantast...
05/02/2025

The 2025 edition of is almost upon us, our stand is ready, the two cars are ready to be revealed and we have a fantastic display of engines and parts that we manufacture. If you are in Paris for the show be sure to come and see us in Pavilion 1, stand 036 from 10am.

With the show season nearing it's end and peoples thoughts turning to winter projects it's a good time to announce that ...
27/09/2024

With the show season nearing it's end and peoples thoughts turning to winter projects it's a good time to announce that we now offer a range of engine machining services to either the enthusiast or motor trade engine builder. Contact us for more information and prices.

Address

7/8 Pipers Wood Industrial Park
Waterlooville
PO77XU

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 2:30pm

Telephone

+442392254488

Website

Alerts

Be the first to know and let us send you an email when Triple M posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Triple M:

Shortcuts

Share

Category