Nicromobeum

Directions Website Contact the business

Nicromobeum Nicromobeum is one of the leading fabricators in titanium, stainless steel and aluminium.

Hand crafted custom exhausts and hard piping, evolve your pride and joy with TIG welded and back purged products for Cars and Motorcycles!

This RX8 is no normal RX8. It has an LS3 V8 engine swap, fully kitted out for track and is also fully road legal. Loaded...
10/10/2026

This RX8 is no normal RX8. It has an LS3 V8 engine swap, fully kitted out for track and is also fully road legal. Loaded with everything you can imagine. The only downside is the 100s of joins in the exhaust, and the slip joins were the wrong way round, bits of the system had literally been beaten with a hammer for clearance. We made a full manifold-back with a split round the diff just so we can make the exhaust sit a lot higher without any restriction by reducing the size of the pipework. V-banded the rear silencers and added a ‘hooligan’ pipe just incase they wanted to get louder! Sounds naughty. Looks naughty. Is naughty 😁 thanks for coming in Richard, hope to see you again soon!

We have been making the 3rd cat deletes for the Emira for a little over 2 years now and finally got one in to do the cat...
30/09/2026

We have been making the 3rd cat deletes for the Emira for a little over 2 years now and finally got one in to do the cat-back! This is a stunning bit of kit with a stunning v6 super charger strapped to it! Thanks for coming in Jake, we will certainly see you again!

What a blast this was to make! Equal length catted manifolds into a stainless x-pipe with valves and anti drone pipes, t...
15/09/2026

What a blast this was to make! Equal length catted manifolds into a stainless x-pipe with valves and anti drone pipes, then 2 add a bit of spice, black, cerakoted 3.5” quad tips. A pretty big job but couldn’t have done it without performancetubeproducts, I can’t wait to hear this tuned on the dyno at Genome Design Porsche!
Thanks for coming in Rob, we will redesign the silencers for you in the winter 😁

Big thanks to Jordan for coming in to get this intake made for his Jag RS! It definitely looks the part now! I’m a big f...
09/09/2026

Big thanks to Jordan for coming in to get this intake made for his Jag RS! It definitely looks the part now! I’m a big fan of the brushed gold!

It’s been a McLaren sort of week! Big thanks to Matty and Chris for coming over to get a titanium and stainless system f...
24/06/2026

It’s been a McLaren sort of week! Big thanks to Matty and Chris for coming over to get a titanium and stainless system fitted. Although this system is super short, it’s crazy what difference an x-pipe makes over the OEM system! Big thanks again, see you both soon for the downpipes next 😉

This Lamborghini Aventador SV sounded good… ish. But it sounded nothing compared to what we made! Head over to our YouTu...
16/06/2026

This Lamborghini Aventador SV sounded good… ish. But it sounded nothing compared to what we made! Head over to our YouTube channel to see how it’s built! 🙌 another one ticked off the list, thanks again Chris Slix for coming to us for some upgrades 😁

Pat came over with this crazy M8 wanting a h-pipe. We did a few extra bits and the results were awesome! With a deeper s...
13/06/2026

Pat came over with this crazy M8 wanting a h-pipe. We did a few extra bits and the results were awesome! With a deeper sound and more burbles, the standard downpipes and no tune, the h-pipe worked wonders! Another happy customer. Thanks again Pat, hope to see you again soon!

Are you interested in what we do? Just a couple of titanium systems we have done over past few months. From track cars t...
03/06/2026

Are you interested in what we do? Just a couple of titanium systems we have done over past few months. From track cars to hypercars with a motorhome thrown into the mix. We live, breathe and even cry titanium. We do also make stainless system.😊 if you’re interested in something bespoke, good quality and reliable, drop us a message!

We built Mat a 3.5” titanium exhaust for his Bugatti Veyron! This was an awesome build and we decided to go for a gradie...
31/05/2026

We built Mat a 3.5” titanium exhaust for his Bugatti Veyron! This was an awesome build and we decided to go for a gradient colour pallet, just because we wanted to show off the colour range of titanium. Only another 450 to make now I guess? 😅 We could not have done it without , the quality and speed makes me wonder why you would go anywhere else! Thanks for coming over Mat, hope to see you again soon for something equally as impressive🫡

16/05/2026

What welding anodised titanium looks like. This is a long process but totally worth it! Using mandrel bends, this saves hours on cutting and cleaning pie cuts, also, it looks so clean! Lastly, using filler wire on each weld makes this 3.5” system even strong than any other competitor that just pulse welds it together.

Address

Waddington
LN59NT

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Nicromobeum posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Nicromobeum:

Shortcuts

Share

Category