MP Enduro Works

  • Home
  • MP Enduro Works

MP Enduro Works Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from MP Enduro Works, Motorcycle repair centre, swansea, .

🏴󠁧󠁢󠁷󠁬󠁳󠁿🔧Enduro & MX workshop 🔧
we undertake all 2t and 4t work
🔧Engine building
🔧Servicing
🔧Maintenance
🔧Tyre/Mousse & tube fitting
🔧Restorations
🔧Sand Blasting
APPOINTMENT ONLY

MP EnduroWorks is growing… and honestly, we need another weapon in the garage. 🎥📸The bikes keep rolling in.The builds ke...
20/05/2026

MP EnduroWorks is growing… and honestly, we need another weapon in the garage. 🎥📸

The bikes keep rolling in.
The builds keep getting better.
The ideas keep getting bigger.

But there’s one thing we’re struggling to keep up with…

CONTENT. 😅

We’re looking for someone who wants to get involved with the digital side of MP EnduroWorks and help us push the brand properly.

Someone who:
📸 Knows their way around a camera
🎬 Can shoot and edit clean video content
📱 Understands social media
🧠 Has creative ideas
🏍 Lives and breathes bikes, riding, racing or workshop culture

This isn’t some polished office job where everyone says “circle back on the email.”
This is dirt bikes, workshop chaos, engine rebuilds, muddy riding footage, late nights, caffeine, swearing at seized bolts, and building something real from the ground up ⚡

You could be:
• A freelancer
• A student
• A hobby creator
• Someone building a portfolio
• Or just someone hungry to create sick content around bikes

We want someone who can help tell the story behind the builds, the workshop, the riding and the brand.

If that sounds like your kind of thing, send us:
✔ Examples of your work
✔ Your socials/portfolio
✔ A bit about yourself

Let’s build something savage together 🤘

📩 DM the page to get involved.

This Honda CRF450X came into the workshop looking like it had lost a fight with a landmine 💥The kickstart had completely...
13/05/2026

This Honda CRF450X came into the workshop looking like it had lost a fight with a landmine 💥

The kickstart had completely snapped part of the crankcases, taking out the outer clutch cover and right-hand centre case with it. Definitely not your everyday repair job.

After sourcing replacement cases, the engine was fully stripped and rebuilt using all new internal bearings, fresh gaskets and seals throughout. Luckily the original crank survived the chaos and was still perfectly usable, so it went back in after a full inspection.

Now she’s back together, running sweet and ready to be thrashed through the trails once again 🌲🏍️

From workshop scrap pile… back to braaap. 💨

Wicked sunday every sunday over Enduro world Wales! Dont wait get yourself booked on for next weekend now you wont regre...
10/05/2026

Wicked sunday every sunday over Enduro world Wales! Dont wait get yourself booked on for next weekend now you wont regret it 😉

Had the joy of being able to test ride the wonderful TM en144 yesterday, And this was the first lap of the day at Enduro...
27/04/2026

Had the joy of being able to test ride the wonderful TM en144 yesterday, And this was the first lap of the day at Enduro world Wales thanks for the pic 📸

Safe to say we are absolutely blown away with this machine

Then again what do you really expect when you swing a leg over a hand crafted Italian works bike 🇮🇹🤌

She may be a 2013 but still rides like shes new

With KYB suspension plush like a hilton hotel pillow 🤩

A hand crafted engine in a frame so dialed in its like riding a bicycle when throwing it around!

10/10 report!

Another tidy job through the workshop this week 🛠️This KTM SX85 came in with seriously stiff front forks and a holeshot ...
26/04/2026

Another tidy job through the workshop this week 🛠️

This KTM SX85 came in with seriously stiff front forks and a holeshot device that wouldn’t engage at all. Straight away we knew something wasn’t right.

After getting stuck in, we found the issue… the air leg was sitting at a massive 150 PSI 😳
For reference, these should be around 5 bar / 75 PSI, so they were basically pumped up like a scaffold pole.

No wonder the forks were rock solid.

We stripped everything down, checked it over, and got it back to proper spec. While we were in there, we fitted a fresh set of All Balls Racing fork seals and refilled with Liqui Moly 5W fork oil to keep everything running smooth and responsive.

All back together, pressures set correctly, and now the forks are working exactly how they should — plush, controlled, and the holeshot device engaging perfectly 👌

Another one sorted and back where it belongs 💨

24/04/2026

Not my finest moment but its definitely worth a laugh 🤣

One of my many fails at Mick Extance Experiance over in the dark side! 🌚!!

Only the brave survive the dark side 😎

2013 KTM 450 SX-F back in action 🔧🔥This one came in with starting issues — weak cranking, a strange whirring noise, and ...
20/04/2026

2013 KTM 450 SX-F back in action 🔧🔥

This one came in with starting issues — weak cranking, a strange whirring noise, and valves out of tolerance.

We started with the basics: upgraded the battery and brought the valve clearances back into spec (inlets were tight). Still not right… so it was time to dig deeper.

After stripping it down, we found the culprit — the one-way starter clutch (freewheel bearing) had failed and was breaking apart, causing the slipping and inconsistent engagement when starting.

With a new, correct battery fitted, valves dialled in, and a fresh freewheel bearing installed, she’s now spinning over properly and running exactly as she should.

Back to full health and back where she belongs — out on the trails 💪🌲

💜 A proper full-circle moment… 💜A couple of weeks on and it’s still amazing to see the impact that day had. Massive than...
19/04/2026

💜 A proper full-circle moment… 💜

A couple of weeks on and it’s still amazing to see the impact that day had. Massive thanks to Latch Welsh Children's Cancer Charity for the kind words and for sharing this post 🙌

We just want to say a huge thank you again to everyone involved…
All the riders, families, supporters, sponsors, and everyone who donated prizes or money on the day. You all played a part in making it what it was 👊

It went better than we ever expected, and knowing it’s gone to such an incredible cause makes it even more special ❤️

Big thanks to Enduro world Wales for having us and letting us put this together – couldn’t have done it without you 🏍️

We’re still blown away by the turnout, the support, and the atmosphere from the whole day.

This definitely won’t be the last one… we’ll be back 👀🔥

Thank you again everyone 💪

A big thankyou to Saffron and Matt and the team at MP Enduro Works , who recently organised an exciting Easter Enduro Weekend and raised over £500.

There was a brilliant turnout for the Charity Ride, with plenty of prizes hidden across both the Adult's and Children's tracks, and there was such a lovely atmosphere throughout the weekend.

We wanted to thank everyone who donated prizes and who took part in the charity rides, it's really lovely to see the community come together for events like these and we hope everyone had a great time!

Well yesterday was a blast Mick Extance Experience what a mega venue 👀 we will be back!Day out team building with all th...
18/04/2026

Well yesterday was a blast Mick Extance Experience what a mega venue 👀 we will be back!

Day out team building with all the crew from Enduro world Wales thanks for organising a it Brian Murphy 🤪😎 and everyone else thanks for making it one to remember 🤜🤛

Address

Swansea

Website

Alerts

Be the first to know and let us send you an email when MP Enduro Works posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

  • Want your business to be the top-listed Autos & Automotive Service?

Share