DADSystem

25/10/2018

WOT test on dyno

08/09/2018

Chris Crayford Hayley Griffiths

01/09/2018

Well it's been a good day working on the Dyno, we fitted a clutch pedal and did a part load test to confirm all is ok and that Telma is working. Happy days

31/08/2018

1st engine run on dyno, couple of problems, inlet cam sprocket not running true also faulty gearbox (not shown in video) had to be changed. Now onto calibrations and data display software.

22/08/2018

Exhaust front end finished, moving forward... Patrick Heaher

22/08/2018

First victim fitted.

17/08/2018

Hi all, Just to say, not one of my best Nationals Race weekends But did enjoy it anyway. Not been a good year for racing with lots of meeting cancelations and this has slowed down my development on my ECU with a lot of my Telemetry coming from the races held. However this has made us look at other ways of obtaining this and me and Patrick Heaher have decided that without track time a alterative is required, and that is a build started last weekend on our new engine Dyno and with a load capacity of 1600Nm/1100Ftlb of torque capacity. Loads will be happening this year, will be posting pictures and videos shortly ....

09/04/2017

Well it's been a busy week building and fitting this full management system and full car wire up for Nathan Riddoch on his class 3 moggy...
Good luck for the 2017 season🖒

17/03/2017

Working it's way around the country being built so won't be long until it's with us for a full blown race management system.....hopefully this will be a car to look out for this season...👌 all the best luck Nathan Riddoch...🖒

07/03/2017

Data Logging Display

DLD100 Specifications

25/02/2017

Another engine rebuilt,ignition system fitted and car wired up...good luck out there!!

22/02/2017

New Slide's in development, Hope to run them This year