Marine engine fitting and servicing

Marine engine fitting and servicing Canal boat engine fitting and servicing, generator fitting and servicing, Hydraulic steering fitting and maintenance, drivetrain maintenance NW Based

North West Based, canal boat engine fitting, servicing and maintenance. Generator set fitting and maintenance, hydraulic steering also catered for . Trade and Private customers welcome

It’s been a while…Vetus 42 installed ✅
02/11/2024

It’s been a while…

Vetus 42 installed ✅

29/08/2021

Hello everyone 👋

Happy and sad post at the same time.

I will not be undertaking any water work now for the future I’m sorry to say. I have a great customer base and fantastic following.

However… I will now be permanently based at Swan Boat Builders. The older I’m getting and the ever more popular I can’t fit two ridiculously busy roles into my life.

Thank you to everyone over the years for the ongoing support, really really appreciate it.

My advice is always free to those who have my contact details don’t hesitate.

David’s Widebeam was the last yesterday, full engine and gearbox service. I also installed a vetus 95KGF bow thruster re...
02/06/2021

David’s Widebeam was the last yesterday, full engine and gearbox service. I also installed a vetus 95KGF bow thruster recently too while the boat was out for blacking.

Always a pleasure bud, thanks again

Quick check this morning for the ADL Boat Painters customer complaint of poor battery life and charging.  After seeing c...
02/06/2021

Quick check this morning for the ADL Boat Painters customer complaint of poor battery life and charging.
After seeing countless other other to no avail, I was called in. The system needs some fresh battery cables and a voltage sensitive split charge relay in place to provide sufficient charge and split the starter and leisure battery banks.

250 hour service for this stunning swan narrowboat. 60 foot cruiser with a beta 50, more than ready for the ribble link ...
02/06/2021

250 hour service for this stunning swan narrowboat.
60 foot cruiser with a beta 50, more than ready for the ribble link now. Spare filters and belt kit supplied too. All genuine beta.

Have fun guys always lovely to see you both.

Jacki’s Widebeam serviced yesterday. Genuine oil and secondary fuel filter replaced along with the gearbox oil. Alignmen...
02/06/2021

Jacki’s Widebeam serviced yesterday. Genuine oil and secondary fuel filter replaced along with the gearbox oil.
Alignment check and all other checks and adjustments complete 👌

A trip out to see Richard abs Sheila today, 50 hour engine and gearbox service done for this Hybrid marine set up, alway...
13/05/2021

A trip out to see Richard abs Sheila today, 50 hour engine and gearbox service done for this Hybrid marine set up, always nice to have a catch up.
Happy cruising 😎

St Mary’s today, anodes off and on for the talented lads ADL Boat Painters they have stripped and repainted the roof and...
05/05/2021

St Mary’s today, anodes off and on for the talented lads ADL Boat Painters they have stripped and repainted the roof and hatch for this customer.
My call was to remove and replace 4 anodes at the customers choice.

A trip out to see Tim and Joy today to service their Aintree Beetle “jester”Greeted with a lovely cup of tea and a hot c...
07/04/2021

A trip out to see Tim and Joy today to service their Aintree Beetle “jester”

Greeted with a lovely cup of tea and a hot cross bun 😋 great to have a quick catch up
And get the 50 hour running in services carried out, a clean bill of health and ready to enjoy once the lockdown lifts.

Barrus shanks full service, all fluids and filters changed. Customer had complaint of coolant leaks and diesel. New fuel...
29/01/2021

Barrus shanks full service, all fluids and filters changed. Customer had complaint of coolant leaks and diesel. New fuel isolator tap fitted, and coolant hose excess cut and refitted with new clips to get rid of the leaking part.

All in all not a bad bill of health and a lovely little boat. The 4 legged friend was a fan too 🐈

Just a quick reminder...If you can’t find a decent accessable place to Moor your boat, I will not be carrying out any wo...
28/01/2021

Just a quick reminder...

If you can’t find a decent accessable place to Moor your boat, I will not be carrying out any work. An hour wasted this morning driving up and down basically farm tracks covered in pot holes.

If the boat isn’t easy accessible I will not be carrying out any work, I won’t be damaging the car getting there or risking damage to myself if the boat is located miles down the toe path either.

Stay safe everyone 😎

Last one of the year! Beta 50 commissioning service on this Aintree boats Sailway Widebeam. The lads doing a great job o...
24/12/2020

Last one of the year! Beta 50 commissioning service on this Aintree boats Sailway Widebeam.
The lads doing a great job of the internal fit out.

Address

Southport
PR8

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 9am - 1pm

Telephone

+447729371016

Website

Alerts

Be the first to know and let us send you an email when Marine engine fitting and servicing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share