Phoenix Engine Management

Phoenix Engine Management We Specialise In:
- Wiring up Lexus 1UZ/ 3UZ/ 1JZ/ 2JZ Series Engines
- Lexus and Toyota Diagnostics

We Specialise In:

- Wiring up Lexus 1UZ/ 3UZ/ 1JZ/ 2JZ Series Engines
- Lexus and Toyota Diagnostics
- Toyota/Lexus Key Coding
- Security Removal
- Aftermarket Management Installation
- Custom Harness Building
- Toyota and Lexus Servicing

Here we have an LS400 1998-2000 1UZ-FE VVT-i Engine Harness. We have taken the original LS400 Engine Harness and striped...
03/03/2023

Here we have an LS400 1998-2000 1UZ-FE VVT-i Engine Harness. We have taken the original LS400 Engine Harness and striped and cleaned it. We have removed all the unnecessary wires and added a Fuse Box to make the Engine Harness a Standalone Unit that can run in any vehicle. We have also removed the immobiliser in the ECU and we have added an ATEMU device to keep the ECU running as it should without the Automatic Gearbox being connected.
Here is a link to the YouTube video where we go into much more depth in explaining how the harness works and the testing we carry out on each harness.
https://youtu.be/_iU95xW0I-Q
Please contact us at
www.facebook.com/phoenixenginemanagement
or
[email protected]

Here we have our new 1UZ-FE 1989-1997 to IS200 Plug and Play Modular Harness designed for Link Storm and X-Treme G4X ECU...
02/03/2023

Here we have our new 1UZ-FE 1989-1997 to IS200 Plug and Play Modular Harness designed for Link Storm and X-Treme G4X ECU's.
The harness is capable of running both the Storm and the X-Treme ECU. Without any modification.
We have also built in the ability to carry out many modifications without having to alter or change the Main Harness. You can simply Swap out the Sub Harnesses and change items as you upgrade your engine.
We have included the ability to add the following
Oil Pressure and Temperature Sensor
Fuel Pressure and Temperature Sensor
Drive By Wire with Electronic Accelerator Pedal
To name a few.

Here is a link to the YouTube Video that goes into much more depth
https://youtu.be/qFtlyNONuLc

Please contact us at
www.facebook.com/phoenixenginemanagement
or
[email protected]

Here we have our Lexus IS200 ECUMaster Black Plug and Play Patch Harness. This utilises our 122 Pin ECU Header Break Out...
02/03/2023

Here we have our Lexus IS200 ECUMaster Black Plug and Play Patch Harness.
This utilises our 122 Pin ECU Header Break Out Box. The box can be used with 1G-FE / 1UZ-FE VVT-i / 1JZ-GTE VVT-i JZX110 JZS171 / 2JZ-GE VVT-i with the 122 Pin ECU not the 167 Pin Header found in the IS300 / 2JZ-GTE VVT-i Aristo. These boxes are used for a Manual Application only.
It includes our ECUMaster Black Patch Harness from the 122 Pin ECU Header Breakout and the ECUMaster ECU.
This customer has opted for a Bosch LSU4.9 Addition.
This setup also allows at a later date addition of a MAC Boost Valve Solenoid Addition to control Boost Electronically. It also allows the addition of an Oil Pressure Sensor as well as Fuel Pressure Sensor if required.
Here is a link to the YouTube Video showing the testing and more in depth overview of the Patch Harness. https://youtu.be/TewtJI4Gjtk

Here we have one of our JZ Modular Engine Harnesses. Built for use with an ECUMaster Classic ECU. This harness is going ...
01/03/2023

Here we have one of our JZ Modular Engine Harnesses. Built for use with an ECUMaster Classic ECU.
This harness is going into an IS200 but moving the ECU inside the Vehicle rather then in the engine bay in the original IS200 ECU Box.
This harness has an R154 Gearbox Harness.
Here is a link to the YouTube Video showing a more in depth overview and explanation of the Engine Harness. https://youtu.be/1Kg6vhsAqiI

Here we have an existing engine harness that was converted by us a few years ago that was originally plug and play into ...
01/03/2023

Here we have an existing engine harness that was converted by us a few years ago that was originally plug and play into a Toyota Altezza. The Customer then had to move the engine into a Lexus IS200 and so we changed the harness to be plug and play into a Lexus IS200.
Here is a link to the YouTube Video which goes through the Harness in greater detail and shows the testing that we do on each harness.
https://youtu.be/1Vt6tTpr8H8

Here we have our 1UZ-FE Modular Engine Harness. It is built to be used with either a Link X-Treme or Link Storm ECU.It i...
28/02/2023

Here we have our 1UZ-FE Modular Engine Harness. It is built to be used with either a Link X-Treme or Link Storm ECU.
It is designed for use with a Right Hand Drive Vehicle and a Manual Gearbox.
The modular design allows full customisation of the Sensors and actuators and allows addition of sensors further down the line without having to replace or adapt the main engine harness.
NOTE: If using a Link Storm not all functions and sensors are available to use.
Here is a link to our YouTube Video showing a more in depth explanation and overview of the harness. https://youtu.be/GDEYybGYS4g

20/09/2022

Phoenix Engine Management – Part Time Positions

We are looking for two part time staff members that are enthusiastic about auto-electrics and vehicle wiring and that are willing to learn on the job – no previous experience necessary.
We are based outside Evercreech and own transport is necessary due to the location.

Please get in touch via Whatsapp +447961457066 or you can send an email to [email protected]

Damon UZ VVT i MAN RHD Link X Treme ITB.Here we have a Brand New Engine Harness built for use with UZ VVT-i Engines.It i...
15/08/2022

Damon UZ VVT i MAN RHD Link X Treme ITB.

Here we have a Brand New Engine Harness built for use with UZ VVT-i Engines.
It is built for use with a Link X-Treme G4X ECU but can also be used with a Link Storm if you are not using a Drive By Wire Throttle.
This harness is part of our Modular Engine Harness System meaning that upgrading and changing is a very simple procedure.

Please See the YouTube Video for more details and the Testing Procedure.

https://youtu.be/6ujDDGJtjX0

Jonathon LS430 2000-2003 3UZ-FE VVT-i Manual Right Hand Drive Brand New Engine Harness.Here we have a LS430 2000-2003 3U...
14/08/2022

Jonathon LS430 2000-2003 3UZ-FE VVT-i Manual Right Hand Drive Brand New Engine Harness.

Here we have a LS430 2000-2003 3UZ-FE VVT-i Brand New Engine Harness built for use with a Manual Gearbox.
The Harness is rebuilt so the ECU lives inside the vehicle and it's built for use with a RHD Vehicle.

Please See the YouTube Video for more details and the Testing Procedure.

https://youtu.be/7wUaN4FB9Co

Lee Toyota Crown Majesta 3UZ-FE VVT-i 2004-2008 IS200 Manual LHD Plug and Play ADAPT Harness.Here we have a Toyota Crown...
14/08/2022

Lee Toyota Crown Majesta 3UZ-FE VVT-i 2004-2008 IS200 Manual LHD Plug and Play ADAPT Harness.

Here we have a Toyota Crown Majesta 2004-2008 3UZ-FE VVT-i Engine Harness adapted to be Plug and Play into a Lexus IS200.
The customer is using a J160 Manual Gearbox.
The original 3UZ-FE VVT-i Engine Harness has been stripped and cleaned and all unnecessary wires removed and all wires required for the swap have been added in. It is completely Plug and Play with no wiring required by the customer.

Please See the YouTube Video for more details and the Testing Procedure.

https://youtu.be/bJgi1fIpB1c

Luca Car Mods LS400 1998-2000 1UZ-FE VVT-i Right Hand Drive Automatic Adapted Engine Harness.Here we have a LS400 1998-2...
13/08/2022

Luca Car Mods LS400 1998-2000 1UZ-FE VVT-i Right Hand Drive Automatic Adapted Engine Harness.

Here we have a LS400 1998-2000 1UZ-FE VVT-i Engine Harness. We have taken the original engine harness and stripped and cleaned and adapted it to be a standalone setup capable of being installed in any vehicle.

This harness is for a Conversion done by Luca Car Mods in the Netherlands.
He specialises in Performance Part Sales and Fabrication.
If you are looking for a Conversion in the Netherlands then you can contact him via his Website
Lucacarmods.com

Please See the YouTube Video for more details and the Testing Procedure.

https://youtu.be/mEMLmY2Go6o

Josh LS400 1995-1996 1UZ-FE to IS200 Plug and Play using J160 Gearbox.Here we have a 1UZ-FE Non VVT-i from a LS400 1995-...
13/08/2022

Josh LS400 1995-1996 1UZ-FE to IS200 Plug and Play using J160 Gearbox.

Here we have a 1UZ-FE Non VVT-i from a LS400 1995-1996. The harness is brand new and has been built to be plug and play into a Lexus IS200.

Address

Phoenix Engine Management
Shepton Mallet
BA46NA

Telephone

+447957713564

Website

Alerts

Be the first to know and let us send you an email when Phoenix Engine Management posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category