Evo Vehicle Welding Ltd

11/10/2026

Omega getting some love ❤️

New front springs
New steering centre rod
New battery
Tow bar removed
Paint touched up

Many more little jobs still to go!

Evo Vehicle Welding Ltd

09/10/2026

A solid weeks graft here at Evo Vehicle Welding Ltd we're not afraid to dabble in other trades 💪

Now time to have some fun (still welding 😁)

New office/waiting room built ready for the winter, insulated and air tight 👍

Have a good weekend everyone 👌

05/10/2026

Another little run around getting the Evo treatment today 👊

A bit more work on this one, we utilised our new stands that we recently made to allow us to move the lift arm out of the way whilst working 😎

We also welding 2 exhaust hangers that were mentioned on its recent MOT.

All painted ready to hit the road and completed in one day 👌

Only at Evo Vehicle Welding Ltd

03/10/2026

Nice little Saturday job on this Toyota Aygo.

Rear sill repaired and painted for MOT.

Same day turnaround 💪

Only at Evo Vehicle Welding Ltd

02/10/2026

01/10/2026

Something different today 🤔

We fitted rear seats to this Transit van properly plated and noted through the floor to correct specification, plus a hole welded up from the previous owners camper build 👊

Evo Vehicle Welding Ltd

29/09/2026

Today we have this lovely BMW Z3 for a repair to the drivers floor, we also treated some other areas of the floors where paint was flaking off and painted with underseal so hopefully this car will not need to visit us again for some time 👍

Evo Vehicle Welding Ltd

28/09/2026

Happy Monday!

We have another MX5 NC in today for a rear inner sill repair.

Have a great week everyone! 👍

Evo Vehicle Welding Ltd

23/09/2026

Fiat Scudo other side now finished ready for many more years on the road 👍

Evo Vehicle Welding Ltd

18/09/2026

Fiat Scudo van with us currently, it's rotting from the inside out!

We cut out the entire sill and replaced the full 3 length sections.

A previous attempt at an outer sill repair was not up to standard and the welds on the fl**ge were not properly prepared and not penetrated.

The sills ends/inner arch were rotten and have now been capped off properly 👌

The bottom of the wheel arch and around the door jam was also rotten so we made a nice repair panels and now it's as it was from the factory.

Just the other side to do now!

Evo Vehicle Welding Ltd