Custom Brakes and Hydraulics

Custom Brakes and Hydraulics Custom Brakes and Hydraulics Ltd are Brake and Clutch Relining Specialists who have been servicing the Industry since 1980.

From mobile cranes and heavy plant to marine equipment, classic vehicles, agricultural machinery and industrial friction...
27/08/2026

From mobile cranes and heavy plant to marine equipment, classic vehicles, agricultural machinery and industrial friction applications, Custom Brakes & Hydraulics supports a wide range of sectors.

With over 40 years’ experience, our Sheffield workshop provides in-house brake relining, clutch relining, bonding, riveting, machining and reconditioning.

Whether parts are hard to source, downtime needs to be reduced, or existing components need restoring, our team can help provide a practical, cost-effective solution.

If it uses friction, there’s a good chance we can help.

Need help with brake or clutch relining?
📞 0114 276 7971
📧 [email protected]
🌐 https://bit.ly/489jbhX

Accurate measurements help make brake relining and replacement parts much easier to arrange.Before requesting advice or ...
25/08/2026

Accurate measurements help make brake relining and replacement parts much easier to arrange.

Before requesting advice or sending parts, it’s useful to check details such as:

• Brake drum diameter
• Shoe width
• Fixing points
• Overall condition
• Existing lining wear

Correct measurements help reduce delays, avoid incorrect parts and support a smoother turnaround.

At Custom Brakes & Hydraulics, our team can advise on brake relining requirements across commercial, plant, marine, agricultural, industrial and classic vehicle applications.

Need advice on brake relining?
📞 0114 276 7971
📧 [email protected]
🌐 https://bit.ly/489jbhX

21/08/2026

Keeping commercial vehicles on the road starts with reliable maintenance.

Regular servicing, inspections and repairs help reduce downtime, identify issues early and keep your vehicles operating safely and efficiently.

At Custom Haulage, our garage services support businesses with professional vehicle maintenance, including servicing, repairs, diagnostics, MOT preparation and planned inspections.

Whether you need help managing your maintenance schedule or support when a problem occurs, our experienced team is here to help keep your fleet moving.

Ready to discuss your transport requirements? We're here to help.
📞 Call: 0114 276 7971
📧 Email: [email protected]
🌐 Learn more: https://bit.ly/3GDID2K

21/08/2026

Need a reliable tractor unit for your trailer?

Traction only haulage is a practical option for businesses that already have trailers but need professional support moving them from one location to another.

It can be useful for busy periods, additional capacity, holiday cover, breakdown support or regular trailer movements where a dependable haulage partner is needed.

At Custom Haulage, we provide reliable and cost-effective transport support built around our customers’ requirements, helping keep trailers, goods and operations moving smoothly.

Ready to discuss your transport requirements? We're here to help.
📞 Call: 0114 276 7971
📧 Email: [email protected]
🌐 Learn more: https://bit.ly/3GDID2K

20/08/2026

Whether you need a one-off delivery or ongoing haulage support, having a reliable transport partner makes all the difference.

At Custom Haulage, we provide cost-effective transport services designed around the needs of your business. From single movements to regular contracts, our team works to keep your goods moving safely, efficiently and on schedule.

We understand that every job is different, which is why we focus on clear communication, careful planning and dependable service from collection through to delivery.

Whatever your transport requirements, we’re here to help provide a practical solution.

Ready to discuss your transport requirements? We're here to help.
📞 Call: 0114 276 7971
📧 Email: [email protected]
🌐 Learn more: https://bit.ly/3GDID2K

For overhead cranes and elevator systems, brake performance is critical.Custom Brakes & Hydraulics supports the crane an...
20/08/2026

For overhead cranes and elevator systems, brake performance is critical.

Custom Brakes & Hydraulics supports the crane and elevator service industry with specialist brake relining to help minimise downtime and keep essential equipment operating.

With over 40 years’ experience and in-house relining capabilities, we provide practical brake and clutch solutions for demanding industrial applications.

Need help with overhead crane or elevator brake relining?
📞 0114 276 7971
📧 [email protected]
🌐 https://bit.ly/489jbhX

Some applications need more than an off-the-shelf part.Custom Brakes & Hydraulics can support customers with bespoke fri...
18/08/2026

Some applications need more than an off-the-shelf part.

Custom Brakes & Hydraulics can support customers with bespoke friction products designed around specific requirements.

From moulded or bonded disc pads to machined friction cones, we help provide practical solutions for specialist, unusual or hard-to-source applications.

This is especially useful for industrial engineering, machinery, heritage equipment, marine applications and older systems where replacement parts are no longer readily available.

Need help with a specialist friction product?
📞 0114 276 7971
📧 [email protected]
🌐 https://bit.ly/489jbhX

Marine and offshore applications need reliable friction solutions that can perform in tough conditions.Custom Brakes & H...
13/08/2026

Marine and offshore applications need reliable friction solutions that can perform in tough conditions.

Custom Brakes & Hydraulics supports the marine industry with brake band relining.

We can reline and reset marine brake bands, supply woven asbestos-free brake lining, and manufacture brake bands from samples or engineering drawings.

From mooring winches to specialist marine equipment, we provide practical relining and reconditioning support.

Need help with marine brake relining?
📞 0114 276 7971
📧 [email protected]
🌐 https://bit.ly/489jbhX

Not every relining job is the same.Some brake and clutch components require bonded linings. Others need riveted linings....
11/08/2026

Not every relining job is the same.

Some brake and clutch components require bonded linings. Others need riveted linings. The right method depends on the component, application and working conditions.

At Custom Brakes & Hydraulics, we offer in-house bonding, riveting, relining and machining, allowing us to support a wide range of components.

From heavy plant and cranes to classic vehicles, marine equipment and industrial machinery, we can advise on the best relining method for the job.

Need help with brake or clutch relining?
📞 0114 276 7971
📧 [email protected]
🌐 https://bit.ly/489jbhX

Finding replacement brake or clutch components for classic vehicles can be difficult.Custom Brakes & Hydraulics supports...
06/08/2026

Finding replacement brake or clutch components for classic vehicles can be difficult.

Custom Brakes & Hydraulics supports vintage and classic car and motorcycle owners with specialist brake and clutch relining from our Sheffield workshop.

We can reline brake shoes and clutches using suitable asbestos-free friction materials, with thermal bond or rivet procedures depending on the component.

Whether it’s for road use, trials or racing, the correct lining material can help restore performance while keeping original parts in service.

Need help with classic vehicle relining?
📞 0114 276 7971
📧 [email protected]
🌐 https://bit.ly/489jbhX

Address

Unit 2 Holbrook Rise, Holbrook Industrial Estate
Sheffield
S203

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 8am - 12pm

Website

Alerts

Be the first to know and let us send you an email when Custom Brakes and Hydraulics posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Custom Brakes and Hydraulics:

Shortcuts

Featured

Share

Category