Birch mx maintenance

20/07/2025

07/01/2024

This quad came in today, the customer bought it as a none runner and tried to get it running with no luck, after a couple hour of tinkering and a charged battery the quad starts on the button and runs all day long. It’s so satisfying hearing something run after a bit of time and effort.😆👌

07/01/2024

Hope everyone had a good Christmas and new year, while everyone was celebrating we were busy keeping wheels turning, if I haven’t got round to you I will eventually i just don’t get enough hours in a day 😂. I can’t thank everyone enough though for getting in touch and keeping me busy hopefully we’ll have a better workshop this year which means I can take on more work.

Anyway back to the post, here we had a surron come in needing an inner tube and new break pads all round, it wasn’t long before it was all back together and functioning the way it should, this was the 3rd customer today!!!

27/10/2023

We are now recommended on autos1000!! I’d like to say a huge Thankyou to all my customers and everyone what liked, shared and helped bring work in and got the word out, we couldn’t have done it without you. I can’t wait to see what the future brings, once again Thankyou!!!

like I always say if you have a problem send a message or give us a call we love this job and take great pride in what we do.😁

19/10/2023

Little follow up from the last photos of the pw80 starting first kick every time and ticking over nicely 😁

19/10/2023

Just because we’ve been quiet doesn’t mean we haven’t been busy, lately I’ve had non stop work on so haven’t really had the time to keep up with the page. But here is a pw80 what came in it barely ran, I played with the original carb but it was bodged and nothing was helping so I swapped it out for a new one and now kicks up a runs like a dream, just one of many done and out the door👍

26/09/2023

Crf250r ready for a top end rebuild I can’t wait to hear it run 👌

23/09/2023

Crf150r came in and had a good clean aswell as service with fresh oil, oil filter and air filter and gave the carb a good once over to make sure everythings in check, can never be too sure, another one of many if your struggling with a bike or aren't too sure on how to do something get in touch 👍

23/09/2023

A quick before and after of this little lt50 what came in and it's not been easy😂 swapped all jets in carb exhaust was clogged with carbon and needed a couple new gaskets after replacing a few bits, air filter and tuned the carb in this little quad ticks over and revs mint, even I'm happy with this one.

23/09/2023

Ktm105sx came in needed clutch bleeding, 2 8mm bolts and a gasket got this done within 20 mins just need to get a vid of the clutch working but customer is more than happy with the end result.