Revington TR

Revington TR Subscribe to our Newsletter! http://www.revingtontr.com/shop/collection_display.asp?CID=1097 Specialising in parts for TR2-TR6.

Renowned for our suspension packages for all models and knowledge of fuel injection on this model range.

A few lovely words from Chris. Chris originally came to us for a rolling road tune and a rear damper conversion.While tu...
06/07/2026

A few lovely words from Chris.

Chris originally came to us for a rolling road tune and a rear damper conversion.

While tuning the car we found the fuel pump not outputting the correct pressure, even though it was only 2 years old! We tried to increase the pressure on the prv but could not get it any higher than 80 psi, we ideally like to see 105 psi for optimum performance.
After discussing the findings with Chris, we decided the best course of action was to replace both the PRV and the fuel pump to ensure maximum reliability and performance.

We fitted our Fuel Pump & PRV Kit (Part Nos. RTR4050XK & RTR4456K). These kits have proven their reliability time and time again—most notably in Neil’s own Targa TR5, which has covered hundreds of thousands of miles over the past 20 years in countries around the world, across a huge range of altitudes and temperatures, without a single issue.

————————————————————————

Our workshop is at your disposal for anything from an oil change to a full restoration. Notably, we have an 800-horsepower rolling road for engine tuning.

To contact us about booking your car in, email [email protected]

Don’t forget to check out our sale section on the website — we are always adding new items!

Click the link in our bio or visit https://www.revingtontr.com/sale

19/05/2026

A new shipment of Mackay hoses in from Australia.
We are now fully stocked with future supplies of our hose kits and individual hoses. We have been selling these hoses for over 20 years without a single failure.
We also fit these hoses in our workshops where reliability is paramount

A common issue we see in the workshop is worn or missing throttle pedal bushes, along with bent throttle stops.These pro...
10/04/2026

A common issue we see in the workshop is worn or missing throttle pedal bushes, along with bent throttle stops.

These problems can leave your throttle feeling loose and unresponsive, impacting overall driving performance.

To resolve these issues we:
- Straighten and reinforce the throttle stop with a welded bracket to prevent future bending
- Install high-quality SuperPro pedal bushes (SPF0982) for a tighter, more precise feel

If your throttle pedal has excessive play and you want sharper, more responsive acceleration, get in touch with us today

————————————————————————

Our workshop is at your disposal for anything from an oil change to a full restoration. Notably, we have an 800-horsepower rolling road for engine tuning.

To contact us about booking your car in, email [email protected]

Don’t forget to check out our sale section on the website — we are always adding new items!

Click the link in our bio or visit https://www.revingtontr.com/sale

Our seats are still a popular upgrade for TRs. They provide comfort and security, whilst being as wide as possible given...
27/03/2026

Our seats are still a popular upgrade for TRs. They provide comfort and security, whilst being as wide as possible given the cabin size of a TR. Standard pricing is for a black seat with white or black piping. Alternative seat and piping colours are available at an additional cost. (Part number RTR6125)

These seats pair perfectly with a roll over bar, harness bar, and harnesses (part numbers RTR9053, RTR9148HB, and RTR9249). The harness bar can also be used individually with a set of harnesses, if preferred.

————————————————————————

Our workshop is at your disposal for anything from an oil change to a full restoration. Notably, we have an 800-horsepower rolling road for engine tuning.

To contact us about booking your car in, email [email protected]

Don’t forget to check out our sale section on the website — we are always adding new items!

Click the link in our bio or visit https://www.revingtontr.com/sale

24/03/2026

are now in a position where we are actively looking for an experienced self employed Historic & Classic Vehicle Engineer / Mechanic, based at our Wrington workshop.

Approximately two days per week needed, with a potential to increase if required.
This is not an apprenticeship position, the candidate MUST be able to work to an extremely high standard, unsupervised and with a background and technical knowledge of Historic & Classic vehicles.

Please contact Rachel via email at
[email protected]

Alternatively visit our website www.wolf-developments.com

Neil & Sue are taking on the Balkans Rally!! 🚙Next week, Neil & Sue are setting off for a month long rally in the Works ...
23/03/2026

Neil & Sue are taking on the Balkans Rally!! 🚙

Next week, Neil & Sue are setting off for a month long rally in the Works TR4 Rally car registered 6VC 👌🏽

They will be taking part in Malcolm McKays Balkans Rally, run under the banner of Classic Rally Press Ltd, here’s the map 🗺️ extract that gives some idea of some of the places they will be visiting

This is a return visit for 6VC to this area as the car, which was part of the works Competition Department from early 1962, was part of the works team that campaigned the 1963 Liege-Sofia-Liege.

The event was a grueling affair with most of the field falling by the wayside.

Only a handful of cars reached the finish none of which were from the works team.

6VC was a high-speed support car, not competing as such but very much present.

We hope to bring you updates along the way!!

One of the most commonly fitted upgrades in our workshop is the Axial fuel pump kit (part number RTR4050XK), along with ...
20/03/2026

One of the most commonly fitted upgrades in our workshop is the Axial fuel pump kit (part number RTR4050XK), along with our fuel pressure regulator kit (part number RTR4456K). This week alone, we have installed three of these kits.

We are frequently removing both standard and aftermarket systems that have proven to be substandard. In contrast, our pump kits have demonstrated outstanding reliability since we first devisedthe system back in 1987.

When installing the fuel pump kit, we always recommend pairing it with our auxiliary fuse box kit (part number RTR8270K). In addition, we always wire in a relay for the fuel pump. This is essential, as modern pump systems require around 13 amps, compared to just 3 amps for the original setup. This is a commonly overlooked detail when installing aftermarket pump kits.

————————————————————————
Our workshop is at your disposal for anything from an oil change to a full restoration. Notably we have an 800 horsepower rolling road for engine tuning.

To contact us about booking your car in, email [email protected]

Don’t forget to check out our sale section on the website, we are always adding new items!

Click the link in the bio or visit https:// www.revingtontr.com/sale

Sometimes in the workshop we are presented with cars that require special work to achieve the customer's requirements, t...
06/03/2026

Sometimes in the workshop we are presented with cars that require special work to achieve the customer's requirements, this can include manufacturing something bespoke. This particular car came in for a fuel smell in the boot issue, after an inspection we found the pump lines were of a type that would allow fuel to permeate through the hose wall. We also found that the body was sandwiched in between the plates for the fuel filler cap with little chance of a gas tight seal. This would be contributing to the fuel smell in the boot issue. After a discussion with the customer, they opted for the full RTR fuel system including one of our high-capacity aluminium fuel tanks (part number 312359XALK) and for us to fit an original new old stock Leyland lockable filler cap ( part number 571086 ).
Due to the holes in the body where the old filler cap was mounted it was necessary to make an adapter plate utilising the original screw fastening holes with a suitable hole in the middle to accommodate the lockable filler cap and seal. The majority of the manufacturing for this part was done on our period lathe which fits in well in our workshop being a COLCHESTER model TRIUMPH 2000.
 
This part of the work on the car is now complete, and the customer is very pleased: 'The filler cap looks excellent'
 
————————————————————————
Our workshop is at your disposal for anything from an oil change to a full restoration. Notably we have an 800 horsepower rolling road for engine tuning.

To contact us about booking your car in, email [email protected]

Don’t forget to check out our sale section on the website, we are always adding new items!

Click the link in the bio or visit https:// www.revingtontr.com/sale

We very often come across poorly performing aftermarket throttle linkage kits. In this instance, the customer may well h...
27/02/2026

We very often come across poorly performing aftermarket throttle linkage kits. In this instance, the customer may well have struggled to fit and adjust the choke mechanism as we found the cable lying across the inlet manifolds. When the throttle pedal was depressed fully to the floor, the throttles were only opening to around 50% — significantly restricting engine performance. The throttle push rods on this style of kit are also difficult to adjust compared to an overhead system.

After discussing the issues with the customer, he was happy for us to install one of our overhead throttle linkage kits, part number RTR4211K (picture 2). Our throttle system has proven itself to be a major contributor to smooth running and maintainability of the Lucas mechanical petrol injection system. By relocating the mechanism above the throttle bodies, heat is kept away from the linkage while access for adjustment is greatly improved. The overhead arrangement also frees up valuable space below, allowing fitment of a high gas-flow exhaust system.

Following up on our engine post two weeks ago, the engine is now back together and in the car. Now we begin the process ...
20/02/2026

Following up on our engine post two weeks ago, the engine is now back together and in the car. Now we begin the process of bolting everything back onto the engine, ready for its first start-up!

————————————————————————
Our workshop is at your disposal for anything from an oil change to a full restoration. Notably we have an 800 horsepower rolling road for engine tuning.

To contact us about booking your car in, email [email protected]

Don’t forget to check out our sale section on the website, we are always adding new items!

Click the link in the bio or visit https:// www.revingtontr.com/sale

Address

Thorngrove Barns Unit 1
Middlezoy
TA70PD

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Revington TR posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category