Depending on the finish that is required, to fully wrap a car will cost from £1300. The cost varies depending on the size of the car, the complexity of areas that require wrapping ( i.e. Door shuts, under bonnets, inside the boots are from £200 each
How long does it take to wrap my car? We will need your car for at least two days to complete an standard, external wrap. This will allow us time to c
lean and prepare the car, removing any exterior items like lights, door handles and badges. Can it be removed? Definitely, and this is a key benefit of vehicle wrapping vs painting. At any time during the future, the wrap film can be removed to reveal the car’s OEM paintwork. What materials do you use? We endeavour to use only the best available vehicle wrapping films, and specify material dependent on the requirements of each individual project. Our preferred materials are manufactured by 3M, Avery, Arlon, Oracal. For PPF we are using Bodyfence and BodyfenceX
We are fully certified by the vinyl leaders
3M AVW - authorised vehicle wrapper
3M Preferred graphic installer
3M Knifeless certified installer
3M architectural certified installer
Avery Specialist Installer
Arlon WrapItRight certified
Arlon fleet installer
UKSG vinyl and wrap technician
TWI certified trainer
William Smith wrap trainer
How long will the wrap last? Although we use only premium films, manufactured by companies like 3M and Avery Dennison, the life of your vehicle wrap is determined by the condition of the car, how it is treated during its life and cleaning methods. Taking all of this into account, you should expect up to 5 years of life from your vehicle wrap. How do I wash the car once wrapped? We recommend that you wash your car either by hand or using a jet wash. We advise against mechanical car washes, as the abrasive action can have a negative effect on the wrapping film. Always take care when using chemicals or detergents to clean your car. Will the wrap damage my paintwork? During the application process, we are careful not to damage the paintwork of your car, and we do not cut material directly on the paintwork. The films that we use will not directly damage the car's paintwork, however you did need to ensure that your vehicle's paintwork is of a sound and OEM quality. What if I have stonechips around the paintwork of the car? We can apply the wrap over areas that are lightly stonechipped, which is usually the front of the car, including the bumper, bonnet and wings. However, this can cause problems upon removal of the wrap, as the damaged paint lacquer can sometimes lift with the wrap film, and you do need to bear this in mind beforehand. The car has accident repaired areas, will this cause a problem? Depending on the quality of the repair work, this can also cause problems. Quite often, accident repairs, and especially the painting process, are not carried out to the original manufacturers exacting standards. We cannot offer any from of guarantee against paint or lacquer lift during the removal of a wrap unless we have provided this in writing prior to the wrap being applied. Do you wrap the inside of the car? As standard, our colour change wraps are ‘kerbside wraps’. This means that when the car is parked or being driven, the exterior paintwork of the car is fully wrapped in the colour and finish of your choice. Door shuts, and interior areas are not wrapped as standard, but can be for an additional cost. Does it fade? The colour of the wrap films we use are light fast for more than seven years, so there won’t be any noticeable fading during this period.
