Fibre Mechanics Ltd

05/10/2026

We are going to be selling our Kuka CNC robot in the near future..
It currently has a milling head fitted, which can be used to machine tooling, or can be used to trim parts..
It is on a 10m long bed and has a reach of around 4m, depending on the angle of the cutting head..
The spindle needs new bearings, but otherwise comes complete with all the ancillary equipment needed to run it..
Before we start to decommission, if someone was interested, it would be beneficial to see it in Lymington, before we start moving it..
Anyone interested, please phone the office.. 01590 427007 or send us an email on [email protected]

22/09/2026

A great day at the Southampton International Boat Show! We were very lucky with the weather 🌞 ⚓️

A big thank you to British Marine for inviting us to the Apprenticeship Recognition Ceremony. We are extremely proud of our 4 apprentices, Alex Meli, Gabe Griffin, Max Otton and Samuel Fellows 👏

We also really enjoyed hearing from Monty Halls, who shared some fascinating insights and delivered a great motivational speech.

After the ceremony, we headed into the Southampton Boat Show and had a great afternoon catching up with people across the marine industry and enjoying everything the show had to offer.

Thank you to British Marine for a brilliant event! 👏

14/09/2026

Two big lifts in a matter of weeks.

First the hull, now the deck, out of tooling and looking superb. The F62 is gathering real pace, and with assembly well underway and fitout starting soon, Hull One will look like a boat before long.

For anyone who's been watching this project with interest: there's still a second build slot available, with launch scheduled for Q2-Q3 2027. The full benefit of Hull One's development, tooling already made, and a boat on the water for the 2027 season.

Come and see her in build. The door in our yard is open, and the brochure is available on request.

racing_yachts

26/08/2026

Moments like this are why we do it.

Hull One of the F62 Canting Keel came out of the mould this week, and she is everything we hoped — fair, light, and stunning to see in the flesh. Months of tooling, laminating and vacuum work by the team, captured in twenty seconds.

And here's the thing: there's room for one more. The Hull Two build slot is open now, with launch scheduled for Q2 2027 — perfectly timed for the 2027 offshore season, Fastnet included.

Brochure available on request. Come see her in build — the door at Fibre Mechanics is always open.

06/08/2026

🚤 Could you be our next Boat Builder or Laminator?

Behind every world-class composite yacht is a team of skilled craftspeople who take pride in every laminate, every panel and every detail.

We're growing our team at Fibre Mechanics, and we're looking for experienced Composite Boat Builders and Laminators to help deliver some incredible projects.

✨ We're looking for experience with:
✔ Carbon fibre composites
✔ Prepreg laminating
✔ Resin infusion
✔ Vacuum bagging
✔ Wet lay-up
✔ High-quality hand laminating

At Fibre Mechanics, you'll be joining a business that's investing in its people as much as its projects. As an Employee Ownership Trust (EOT) company, when we succeed, our people share in that success. We are currently looking for PAYE staff and Sub-Contractors to work on exciting new projects!

If you are interested in joining our team, please send your CV and a short covering email to [email protected]

Please share this post - you never know who might be looking for their next challenge in composites 😊

📍 Lymington & Hythe, Hampshire

27/07/2026

Great to be collaborating with on a potential Hull Two of the F62 Canting Keel. Exciting times ahead for this Mills Design offshore racer.

https://www.instagram.com/p/DbS5qTqiFqa/?utm_source=ig_web_button_share_sheet&igsh=MzRlODBiNWFlZA==

30/06/2026

17/06/2026

✨ Short-listed at the Seawork Awards 2026✨

We are delighted to announce that Shannon Masson was short-listed for the Young Persons Development Award at Seawork Awards last week.

We are extremely proud of Shannon, who joined the company back in September as an apprentice with South Hampshire College Group.

Congratulations, Shannon for this well deserved achievement, and we look forward to seeing your continued success with Fibre Mechanics.

27/05/2026

Exciting projects are underway at Fibre Mechanics! ⚒️ ✨

As our workload continues to grow, we’re hiring experienced Boat Builders and Laminators to join our teams in Hythe and Lymington.

If you have a strong composites background, experience in high-performance marine construction, and take pride in quality workmanship, we’d like to hear from you.

📩 Send your CV to [email protected]

Please note: applicants must already have the right to live and work in the UK and no recruiters or agencies please.