Oddrods customs

Oddrods customs Automotive welding and fabrication services

3800 chassis package. Came on as a stocker. Had new independent front end, narrowed 9 inch rear . Boxed rails with new k...
04/01/2026

3800 chassis package. Came on as a stocker. Had new independent front end, narrowed 9 inch rear . Boxed rails with new kick up, Cummins engine etc. We can offer this service for other shops or individuals. Takes the guesswork out of the chassis side of you're build. Take it home, paint it, plonk you're body back on and good to go

front ends. available for just about anything in any combination. this shows our mid range full sized yank set up. ...
01/01/2026

front ends. available for just about anything in any combination. this shows our mid range full sized yank set up. kit comes with the following. 5 x 4.5 or 5 x 4.75 pcd,s. wilwood discs, wilwood 4 pot calipers, wilwood street brake pads. powder coated and assembled arms with greasable poly bushes. gaz coilovers with a choice of spring rates and free exchange if needed. choice of lh or rhd racks in either manual or power. these are custom built so you can have any width or ride height you want. ideal for stock height vehicles. options on these are anti roll bar,brake hoses, steering hook up kits, air ride. price comparrason to say a heidts m2 of simular spec. you can have ours, with a full rear end set up and still have change from just their front end, BUY BRITISH and happy new year

one of our scooter builds.. few nice one off parts. rear rack, toolbox and spare wheel holder, door cut into frame, side...
27/12/2025

one of our scooter builds.. few nice one off parts. rear rack, toolbox and spare wheel holder, door cut into frame, side door and flywheel cover. has a quattrini m200 engine. original was 4hp and this was 29hp on the dyno. nice increase in a scoot that weighs 70kg

A recent chassis package that went back to the owner to fit the cab and front end to. This was for a 50 s chevy truck. ...
26/12/2025

A recent chassis package that went back to the owner to fit the cab and front end to. This was for a 50 s chevy truck. We can manufacture chassis for most vehicles or just update you're original. From basic suspension set ups, to mounting everything. Engine, box ,exhaust, prop, brake lines,air systems, fuel lines hoses, ect.

Another batch of suspension,s on the go. 3 fronts, 54 chevy car, 54 ford pickup, Austin a35, all on coilovers. 2 rear...
09/12/2025

Another batch of suspension,s on the go. 3 fronts, 54 chevy car, 54 ford pickup, Austin a35, all on coilovers. 2 rears, 54 chevy car on air with rock jock ends, 54 chevy truck on coilovers with poly bushed ends. Three of these are off to other UK shops. We manufacture sets ups for just about anything, in any configuration. Lh,rhd manual or power racks, coilover or air, front or rear racked. Any width, any ride height. 4,5 6 or 8 stud pcd,s..all branded, readily available parts. We aim to turn most around within three weeks, but can get them out in a week, if no powder coating. No need to order from the states and we are cheaper than all the main stream ifs manufacturers.

Sometimes we get asked to do full dry builds. This went out yesterday. Chevy pickup with duel tesla motors. To give an...
07/12/2025

Sometimes we get asked to do full dry builds. This went out yesterday. Chevy pickup with duel tesla motors. To give an idea on how long builds lije this take, you're looking at 600 hours. That's fully dry built befor strip down for paint,wiring trim ect. if youre looking for a build done, were contactable via messenger or 07759374128

One of our small front clips going out to another shop to be fitted to a Morris minor. We can do front and rear end sus...
05/12/2025

One of our small front clips going out to another shop to be fitted to a Morris minor. We can do front and rear end suspension packages for just about any vehicle made. This one has a wilwood brake upgrade. Gaz shocks as standard on all our coilover set ups. MADE IN GREAT BRITAIN.

32 ford chassis in for front and rear suspension set ups. These and this service is available for just about any vehic...
18/09/2025

32 ford chassis in for front and rear suspension set ups. These and this service is available for just about any vehicle

Few front suspension set ups
29/03/2025

Few front suspension set ups

Some of our recent front and rear suspension set ups. These are available for just about any vehicle in any ride height ...
12/03/2025

Some of our recent front and rear suspension set ups. These are available for just about any vehicle in any ride height and width. Can we make a set up for you're car, the answers nearly always yes. Manufactured in GREAT BRITAIN

One of our small jobs.bolr on rear framework and battery box
15/12/2024

One of our small jobs.bolr on rear framework and battery box

One of our smaller set ups waiting collection. No cut outs for chassis as the customer will build the chassis to the c...
07/11/2024

One of our smaller set ups waiting collection. No cut outs for chassis as the customer will build the chassis to the clip

Address

Horton Road
London
UB78HP

Telephone

+447759374128

Website

Alerts

Be the first to know and let us send you an email when Oddrods customs posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Featured

Share

Category