Turn 12 Fabrication

25/12/2025

Merry Christmas to all of our customers we appreciate every single order / drop in small weld repair / large scale project and on going product developments we wish you all the success,health and a happy new year !

12/12/2025

A little step by step process into our crack check and repair services. This can be for a peace of mind for yourself whilst you maintain your pride and joy or for something more obvious like the component below. This is available for any Hot side or Cold side engine component.

Watch the crack indicator develop during the recommended dwell time… this cracked primary is rather large which did in-fact develop out to be a full circumferential break.

We later checked the manifold over in full after the repair was completed resulting in no further indications.

-Charge pipes ✅

- Inlets ✅

-Downpipes✅

-Waste-gate discharge pipes ✅

- NA manifolds ✅

- Turbomanifolds ✅

- Fuel cells ✅ the list goes on …

Drop us a message for this service and any other through either of our social platforms.

23/10/2025

The ever popular ep3 evap location an6 swirl pot going out today for the high power return fuel rail setups 👌😎

Fully tig welded hand built by T12 in the UK 🇬🇧

06/09/2025

19/05/2025

Sorry for the lack of posts recently ! However the website has been worked on to be made a bit more user friendly and include a half dozen new parts, go check it out and even buy something

There will be a pre fab category soon for silencers / end caps / flanges / fixings etc

Many thanks - turn 12 fabrication

12/09/2024

Adams Porsche GT4 first visit to us for a typical Adam service of knocking down some Db’s for black flag free track days / events

After a pre inspection we decided the current exhaust needed a repack, even by ear sounded empty, loose and baked. This is exactly what we found when we cut them open.

We also found a pair of flanges to have no gasgets fitted and appeared to be leaking heavily. So they were sorted with new hardware and fresh gasgets and flanges locking nuts for the extra reliability

Another add on you could call it is the 8” twin down turn adjustable silencers for even lower DB track days, look forward to hearing how these perform when they need to

Adam also wanted a new 3” GT3 style inward rolled slip on tips so the DB killers can be swapped in and out nicely at events

Thanks for returning and trusting us to do the work, what a pleasure to work on.

If this is a service you think you require drop us a message 🏁🏁🏁

10/08/2024

SEGA - SONIC year of shadow collaboration Turn 12 fabrication project we’ve had the pleasure of working on the past few months, we have laser cut,welded and blended all welded areas of the front frame chin spoiler, then areas of the US design we had to replicate colour wise powder coated with areas carbon skinned for final finished details

This was revealed at the SEGA stand Moto GP Silverstone recently 🏍️ due to social media embargo’s and NDA I haven’t been able to release photos but we can now so here we are 😝

If you are involved in projects like this please do get in touch for quotes and queries

Turn 12 fabrication

09/06/2024

Nice little job this on rs3 powered caddy which I’ve had the pleasure of building a heap of parts for, on to his next one now 😎😎 3” induction kit, clean and simple fit for purpose

25/04/2024

More parts off to 🇺🇸 to in the form of a bolt in shifter tower ep3 / dc5 spec and some 316 turret top savers