KL Mechanical Solutions

30/09/2026

🔥 CITROËN DISPATCH 2.0 BlueHDi – STAGE 1 🔥

Another Stage 1 completed by KL Mechanical Solutions 💻⚙️

Stock: 120hp / 300Nm
Stage 1: 200hp / 460Nm 💨

A huge improvement in power, torque and overall drivability — ideal for getting that extra performance from a working van. 🚐💨

✅ Pre & Post Health Checks Included
✅ Dealer-Level Diagnostics
✅ Professional ECU Coding
✅ Fully Mobile – We Come To You

📍 Covering West Suffolk & surrounding areas
📩 Message us to get booked in

KL Mechanical Solutions
🔧 Servicing | Diagnostics | Repairs | ECU Coding

Power figures are quoted calibration figures and may vary depending on vehicle condition and specification.

17/09/2026

🚗 Volkswagen Polo 1.4 TDI Bluemotion – Stage 1

Another Polo treated to our Stage 1 ECU software, delivering a noticeable improvement in power, torque and everyday drivability.

⚙️ Standard: 80 BHP / 190 Nm
🔥 Stage 1: 100 BHP / 245 Nm
🧠 ECU: Bosch EDC17U01

✅ Smoother power delivery
✅ Improved throttle response
✅ Stronger mid-range performance
✅ Pre & post health checks included

📍 Fully mobile across West Suffolk and surrounding areas
🔧 KL Mechanical Solutions – We come to you

🌐 klmechanicalsolutions.com

24/08/2026

30/07/2026

Nissan Qashqai – Injector Replacement & Coding

This Nissan Qashqai came in requiring attention to injector No. 4.

Work carried out:

* Injector No. 4 removed and replaced
* New injector seals fitted
* Injector calibration/code registered to the ECU
* Fuel system checked for leaks
* Fault codes cleared
* Final running checks carried out

Correct injector coding is important because the ECU uses the individual injector calibration value to compensate for manufacturing tolerances and control fuelling correctly. Nissan service information specifies performing injector adjustment-value registration when an injector is replaced.

KL Mechanical Solutions
Mobile Mechanics • Diagnostics • ECU Coding
We come to you across East Anglia

20/07/2026

⚠️ Freelander Charging Fault? We Can Help! ⚠️

This Freelander came to us after a brand-new alternator had been fitted elsewhere, but unfortunately the electrical connector was damaged during installation, leaving the vehicle with charging issues.

✅ New alternator fitted correctly
✅ Wiring checked and repaired where required
✅ Charging system tested and verified
✅ Vehicle back on the road and charging exactly as it should

Even a brand-new part won’t solve the problem if it’s not installed correctly. We don’t just replace parts – we diagnose the fault, repair it properly, and make sure everything is working before handing the vehicle back.

📍 Fully mobile across East Anglia
🔧 Dealer-level diagnostics & programming
⚡ Mechanical repairs, electrical diagnostics & coding

KL Mechanical Solutions – We Come To You.

📩 Message the page to book in or for a free quote.