Matthews Marine

Matthews Marine Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Matthews Marine, Boat Service, Matthews Marine Training, Hull Marina, Kingston Street, Kingston upon Hull.

Welcome to Matthews Marine

Powerboat and motor cruising training based in Hull, with UK-wide training available on your own boat

Marine engineering and repairs covering all leisure and small commercial vessels

Thank you to everyone who has contacted me to wish me well after my accident it means a lot! I am well on the way to rec...
02/08/2026

Thank you to everyone who has contacted me to wish me well after my accident it means a lot! I am well on the way to recovery.

Hope everyone is out enjoying the amazing summer we’ve had and after a successful Humber street sesh event on the marina it’s a fantastic morning.

Hull is like the med today 🌞🌞😎😎

18/06/2026

Hi everyone
Hope your all out boating and making the most of the nice weather 😁😁

We have just released two extra powerboat level2 courses for July

Thursday/friday 9th/10th
Saturday/sunday 11th/12th

They are available to book now on our website

Ian

Another very well deserved congratulations to June,s latest dayskippers!!Shall we say “interesting” weather and all did ...
11/06/2026

Another very well deserved congratulations to June,s latest dayskippers!!

Shall we say “interesting” weather and all did well !!!

Well done guys and good luck with your future boating

Ian and Andrew

Quick qiz Can anyone say where this position is ??
26/05/2026

Quick qiz
Can anyone say where this position is ??

28/04/2026

Hi everyone

Just to let you know course dates for July and August have now been released and are on our website if you know anyone who wants to book 😁

Has anyone ever heard stories of galvanic corrosion and not believed how much damage it can cause to underwater gear ?? ...
17/04/2026

Has anyone ever heard stories of galvanic corrosion and not believed how much damage it can cause to underwater gear ??

It’s imperative to check your anodes for wear and to be of the correct type of metal as a rough guide replace if less than 50% remains

So here’s some pictures of a very expensive stern thruster that had the anodes ignored as it’s “to expensive “ to have it lifted and checked
The entire stern thruster gear box has gone with just the shaft hung on the prop with one of the props gone to davey jones locker!!!
So get them checked 😁

Welcome to the tall ships visiting Hull until tomorrow they are allowing visitors and have been busy today!We were out t...
16/04/2026

Welcome to the tall ships visiting Hull until tomorrow they are allowing visitors and have been busy today!

We were out training when they arrived and watched them arrive ,all great !!

The connection was removed and sure enough coolant dripped out ,in this case it had not been forced down the wire and af...
09/04/2026

The connection was removed and sure enough coolant dripped out ,in this case it had not been forced down the wire and after a simple replacement all seams well and all of the associated codes have disappeared.
As a peice of advice, if you have or know anyone with these engines a good idea is to remove the connection and check for dampness and whilst disconnected remove the green rubber seal so if it should fail in the future it will drip harmlessly which hopefully, would be spotted during engine checks and preventing the pressure to build forcing fluid into the loom .

Address

Matthews Marine Training, Hull Marina, Kingston Street
Kingston Upon Hull
HU12DQ

Telephone

+447849993195

Website

Alerts

Be the first to know and let us send you an email when Matthews Marine posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Matthews Marine:

Shortcuts

Share

Category