CS Performance Ltd

CS Performance Ltd Custom Engine & Gearbox TuningšŸ“ˆ
Performance parts & ServicingšŸ› ļø
Specialising in VAG & BMW vehicles. We specialise in VAG & BMW vehicles.

At CS Performance, we offer routine servicing, maintenance, mechanical repairs and performance upgrades. We pride ourselves on supplying custom engine and gearbox tuning for a wide variety of platforms, along with hardware solutions to cater to any of your vehicles needs. We have a state of the art six car workshop and customer waiting area located on the outskirts of Glasgow. Feel free to pop in for a chat, get to know us and talk all things cars!

Hi everyone, Just a bit of an update from us! From the 1st of February CS will no longer be operating as we have. Both o...
24/01/2024

Hi everyone,

Just a bit of an update from us! From the 1st of February CS will no longer be operating as we have. Both of us have decided that this is the best move going forward. Luke will be taking the unit on and running under a different name, doing purely mechanical work under LM autos.

This is not a decision that has been easy to make, but it’s the right one at this moment in time. To everyone who has supported us, helped us, used us. Thank you, from the bottom of our hearts. We have worked on, tuned and maintained some insane cars over the past year and a half. We really do appreciated everyone single person who has trusted us to work on their pride and joys ā¤ļø

On a brighter note, we will be offering huge discounts on tuning until we close at the end of the month. So if you want to get in before then please drop us a message! Anyone who’s booked in before the end of Feb your booking still stands.

CS, it’s been a pleasure. Time to move onto bigger and better things.

Thanks and lots of love
Ben & Luke

Bagged mk5 r32 in for prop shaft replacement! One of the worst failures we’ve seen, we managed to source a prop from a b...
30/12/2023

Bagged mk5 r32 in for prop shaft replacement!

One of the worst failures we’ve seen, we managed to source a prop from a breakers and get it all fitted with a new front coupling same day for the customer. Back on the road and driving how it should 🫔

Ian’s stage 3 golf r, what an experience this has been. From faulty high pressure fuel pumps to faulty actuators we seen...
21/12/2023

Ian’s stage 3 golf r, what an experience this has been. From faulty high pressure fuel pumps to faulty actuators we seen it all. It was an absolute fight to get this car running right, but we got there in the end. Spec as follows

-RTMG550 turbo
-Airtec intercooler
-DO88 muffler delete and charge pipe
-R600 intake
-NGK racing plugs
-Turbo technics elbow
-Autotech high pressure fuel pump
-Ecotune low pressure fuel pump
-4 bar map sensor
-Custom CS stage 3 ECU & TCU

A lot of revisions to get this dialed, we finished on a strong 508bhp/538nm. One very fast MQB. Good fun tuning this one!

CS stage 1 mk7.5 GTI on the rollers 🤟Lewis’s stage 1 GTI was back in for power runs, car has a ram air intake, elbow and...
11/12/2023

CS stage 1 mk7.5 GTI on the rollers 🤟

Lewis’s stage 1 GTI was back in for power runs, car has a ram air intake, elbow and decat. Made some strong figures with some cheeky flames too!

CS stage 1 - 305bhp/513nm

ā™¦ļøWhatsApp : +447769993852

Another tomei system fitted! US spec decat downpipe mated to a tomei titanium cat back. Hands down the best sounding b58...
29/11/2023

Another tomei system fitted!

US spec decat downpipe mated to a tomei titanium cat back. Hands down the best sounding b58 we’ve ever heard. We have worked with a good few of these systems now and they never fail to amaze us 🫔

ā™¦ļøWhatsApp : +447769993852

Thank you to everyone who came along to our dyno day!Andddd we have a new record for our dyno. Grahams stage 2 pure turb...
26/11/2023

Thank you to everyone who came along to our dyno day!

Andddd we have a new record for our dyno. Grahams stage 2 pure turbo’s f80 Paul tuned M3 made a staggering 744bhp/941nm! Don’t think anything will be beating this šŸ˜…

Another RS3 in the workshop! Customer was experiencing excessive wheelspin. Haldex serviced and tyre pressures reset to ...
23/11/2023

Another RS3 in the workshop!

Customer was experiencing excessive wheelspin. Haldex serviced and tyre pressures reset to factory settings and it hooks up very nicely now 🫔

ā™¦ļøWhatsApp : +447769993852

Andrews 335d, this is a long one… This car initially came to us for exhaust manifold gaskets, not the smallest job itsel...
22/11/2023

Andrews 335d, this is a long one…

This car initially came to us for exhaust manifold gaskets, not the smallest job itself but what we discovered turned it into so much more. Upon removal of the small turbo we discovered the first manifold stud snapped in the head ( we think by a previous garage but can’t be sure ), and we knew this was going to be a tough one! This was causing a huge blow of exhaust gases and it was making a horrible screeching noise under load .

We tried our best to extract the snapped stud, but we had no luck at all. It was too deep with no thread left sticking out we had no option but to replace the whole head itself. Andrew supplied a new skimmed head with new valves and all relevant gaskets, from there we started stripping.

Many 4am finishes later, and the car is running absolutely perfect again. This was extremely difficult and took a lot of head scratching and patience to get done. From making tools to remove seized stuck injectors, to re timing the engine, fitting cams in the new head, re fitting turbos. It was a long journey. To hear the first start up was a huge relief.

Thank you for trusting us Andrew! Swipe to see some pictures of the work/strip down. And if anyone else needs an M57 cylinder head replaced, please give us a good 6 months to recover from this one first 🤣

CS Performance Dyno Day! After hosting a few dyno days for customers and owners clubs, we thought why don’t we do one of...
14/11/2023

CS Performance Dyno Day!

After hosting a few dyno days for customers and owners clubs, we thought why don’t we do one of our own. This will be held on Saturday the 25th of November from 10am, everyone welcome 🫔

If you’d like your car put on the dyno, please drop us a message and we will put you on the list. See you all there!

Little Ibiza Cupra in for tuning! Completely stock car, we carried out a custom stage 1 ecu calibration on the dyno. We ...
13/11/2023

Little Ibiza Cupra in for tuning!

Completely stock car, we carried out a custom stage 1 ecu calibration on the dyno. We finished with some strong numbers for a completely stock set up :

CS stage 1 - 240bhp/411nm

ā™¦ļøWhatsApp : +447769993852

Mk7.5 golf r in for some maintenance, minor service carried out. All updated on vw’s online system! We also fitted a new...
07/11/2023

Mk7.5 golf r in for some maintenance, minor service carried out. All updated on vw’s online system! We also fitted a new Maxton design front splitter šŸ¤

ā™¦ļøWhatsApp : +447769993852

CS stage 2 Supra rollers 🫔We tuned this car a while back. Our favourite combination B58 and tomei! Custom stage 2 ecu ca...
02/11/2023

CS stage 2 Supra rollers 🫔

We tuned this car a while back. Our favourite combination B58 and tomei! Custom stage 2 ecu calibration with added flames, swipe to see them!

ā™¦ļøWhatsApp : +447769993852

Address

Unit 3, Floor Street
Johnstone
PA58QS

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm
Saturday 10am - 3pm

Website

Alerts

Be the first to know and let us send you an email when CS Performance Ltd posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share