Custom Welding & Fabrication

Directions Contact the business

Custom Welding & Fabrication Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Custom Welding & Fabrication, Automotive Customization Shop, unit 6, North house, Callywhite Lane, Dronfield.
(1)

👨🏻‍🏭Life time warranty
💰40% deposit will be taken for ALL bookings.
📞Calls 8am-6pm ONLY - 07951915003.
📧 [email protected]

Please leave us a review on Facebook or Google

https://g.co/kgs/2YXioah

22/09/2026

🔥 Ferrari California 🔥

Back in the workshop for a pair of custom link pipes, helping the engine breathe properly and unlocking its true potential.

The next step will be an X-pipe in place of the centre silencer. The customer wanted to approach the build one stage at a time, making sure we get the perfect balance of performance, sound and drivability without making the car unnecessarily loud and ruining the driving experience.

Once again, we teamed up with for the mapping side of things. The only company we use for our mapping — road log after road log, making sure everything is performing exactly as it should. 🔧🏎️

✅ 316 stainless steel
✅ Fully back-purged TIG welded
✅ Bespoke design & fabrication
✅ Lifetime warranty
✅ Performance-focused without compromising drivability

A stunning Ferrari leaving the workshop with a bespoke exhaust setup built properly from the ground up. 🇮🇹🔥

12/09/2026

435D in for the rear end transformation!
Taking this from a dual exit using rear diffuser making this 453D into a quad exit

Looks awesome if I do say so myself!

Mercedes 570S came to use with the carbon 600LT wanting something special.. something 1 off.. something to standard out ...
04/08/2026

Mercedes 570S came to use with the carbon 600LT wanting something special.. something 1 off.. something to standard out from the crowd..

60 titanium pie cuts later
Nearly 2 bottle of gas
1000 headaches
1000 swear words
And a Starbucks the customer supplied to sweeten the deal..
I think we nailed it!

Absolutely loved doing this and we wish more customers would turn up and give us free rein to make something special

The last 2 photos are what came with the kit, H pipe to balance the gases.. or tube to space the pipe out, wonky tips and 2 slits half way though the exhaust 🤯

They say money doesn’t buy you happiness but titanium exhaust like this make you pretty happy 😍

We recently had Tom Mac back in for a few more alterations to make his Porsche GT4 track friendly, mainly for Nurburgrin...
28/06/2026

We recently had Tom Mac back in for a few more alterations to make his Porsche GT4 track friendly, mainly for Nurburgring and German roads

He loves and lives for noise so we did the silenced tailpipes with a turndown tip to reduce the noise enough and not get black flagged.. also some titanium turndown tips (which we forgot to photograph) which are easily interchangeable on 2 volt flanges

Elite Performance Tuning fitted some yellow stuff pads, titanium wheel studs for extra strength through heavy cornering on track, K&N air filters and a perfectly set up remap giving the Porsche GT4 its full capabilities

Ceramic coating sheffield finished off the work with a full decontamination 2 bucket wash with a quick coating to bring out the real gloss a GT4 like this deserves

This is just one of many cars like this that’s passed through our shop getting the FULL treatment

Any of these products tickle your pickle do not hesitate to message for a quote! Up to 30% off the full treatment when booking in for the full works

Really behind on posts but here is the GT4 we had in not to long back, .mac13 came to us wanting the ver axle pipes for ...
03/06/2026

Really behind on posts but here is the GT4 we had in not to long back, .mac13 came to us wanting the ver axle pipes for a little more noise but nothing too much as this is used a lot in track.. ending up leaving with full interchange system allowing the run the rear silencer for normal track days and the rear silencer delete for the “noises days”

Remapped by as always our go to for mapping software, Luke left this GT4 performing exactly how it should 😍

for the cerakote on the exhaust matching the exhaust system to the wheels

Must say this thing sounds awesome!

THE R8 came back…Apparently to keep the neighbours happy but feel it’s more age related to him 🤔 came back to us after ...
16/05/2026

THE R8 came back…

Apparently to keep the neighbours happy but feel it’s more age related to him 🤔
came back to us after running straight pipes V10 for over 18 months and left us to design a valved section to work with OEM settings.

The video shows the difference, we don’t need to try justify why we are the best 😜

Massive thanks again to for pulling out the stops with this and dealing with my short lead times 👀

MK1 Es**rt Turbo Manifold we produced with the help of , the plan all along was to design and test a turbo manifold tha...
16/05/2026

MK1 Es**rt Turbo Manifold we produced with the help of , the plan all along was to design and test a turbo manifold that works perfectly but also looks the part 🤪

Yes we did his manifold last year but something didn’t sit right with us on the way it looked.. Ash then stripped the car down for a new head gasket so we jumped at the opportunity to Jig his first manifold and rework it.. and here we are 🙌

Available for order with a lead time to make them if it’s something you’re interested in drop us a message, if we get enough interest we will batch make these and have them readily available

We're putting the finishing touches on this engine bay for , and it's looking sharp! We only use the best - Titanium fro...
19/03/2026

We're putting the finishing touches on this engine bay for , and it's looking sharp! We only use the best - Titanium from and top-notch filters from . Ready to upgrade your ride? Get in touch to book your appointment and experience the best!

Exciting times! We're thrilled to announce our sponsorship deal with and his incredible Fiesta project! 🤪 Nathan brough...
05/03/2026

Exciting times! We're thrilled to announce our sponsorship deal with and his incredible Fiesta project! 🤪

Nathan brought his own Turbo and Wastegate to the table, and together we've built a beast that's Dragstrip-ready.

Videos and photos from the Dyno run will be up soon, once it's mapped. What's your power prediction? 👀 The person who gets closest wins a free Hoodie or T-shirt of their choice! 🤪 We've got a target power figure in mind, but we're eager to see what you all think 🧠🧐

After nearly a whole year of running our 3.5” oval valved system, we had another visit from to further our development ...
04/03/2026

After nearly a whole year of running our 3.5” oval valved system, we had another visit from to further our development work on the B58 engine!

Soon to be in stock! 316 stainless steel 4” to 3.5” “race” downpipe leaving to B58 to sing as they should 😍

Message if you’re interested for prices and pre orders!

All flanges are machined perfectly out of the highest grade stainless steel so we can still offer our LIFE TIME WARRANTY with confidence!

Fitting available or posted to your doorstep!

Address

Unit 6, North House, Callywhite Lane
Dronfield
S182XR

Website

Alerts

Be the first to know and let us send you an email when Custom Welding & Fabrication posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Custom Welding & Fabrication:

Shortcuts

Sponsored

Share

Category