GDF Autofab

GDF Autofab metal working since 2000. specialising in motorsport fabrication, restoration, roll cages, metal fabrication, and repair work to cars of any make.
(2)

All aspects of metalwork undertaken

These are happening!We are hoping to do these 1.5” into 2.5” billet stainless steel exhaust merge collectors for around ...
29/08/2026

These are happening!
We are hoping to do these 1.5” into 2.5” billet stainless steel exhaust merge collectors for around £350. Socketed header inlets to allow a strong, secure weld joint and 45mm wastegate port which has gas flow prioritised. Available for pre-order (small batch incoming)
Gdfsteelworks.co.uk

1.8t 20v exhaust manifold fl**ge 3d printed and ready for production!The fitment is better than expected!12mm thick base...
26/08/2026

1.8t 20v exhaust manifold fl**ge 3d printed and ready for production!

The fitment is better than expected!

12mm thick base with tapered internals to encourage air flow!

Socketed face for 1.5” sch-10 tube

Oversized bore to allow for plenty of cylinder head porting.

25/08/2026

We have been busy designing our own fully adjustable top mounts to suit the smaller parameters of the mk1 and mk2 golf turrets (although these would be ideal as a universal top mount for any vehicle).
Huge camber adjustment and 40mm+ of caster adjustment both independently adjustable.
Massive upper bearing and bearing housing with locking nut and serrated washer help to lock everything in place.
These will be supplied with a weld-in turret plate to suit mk1 golf, mk2 golf or an oversized universal plate to suit any vehicle. Anodised Billet 7075 aluminium. Price to come, please let us know if you are interested.

1.8t and 16v billet stainless steel exhaust fl**ges now on the website for pre-order. Small batch of both coming soon. ...
23/08/2026

1.8t and 16v billet stainless steel exhaust fl**ges now on the website for pre-order. Small batch of both coming soon. #1.8t

Front half of the cage fully welded, turret tubes made and fitted as well as a whole load of additional panel work and s...
21/08/2026

Front half of the cage fully welded, turret tubes made and fitted as well as a whole load of additional panel work and stiffening. This mk2 is well on its way to being one the most modified the world has seen. Performance VW magazine

The epic-ness of Gordon’s rwd mk2 golf continues.The aftermarket mx5 front subframe has been tweaked and grafted into po...
20/08/2026

The epic-ness of Gordon’s rwd mk2 golf continues.
The aftermarket mx5 front subframe has been tweaked and grafted into position along with oversized inner tubs, extended turrets for tubular supports and additional bracing and panel work. has made sure that the car sits at a sensible height while allowing for correct suspension geometry and clearance for a 15” wheel with big sticky tyre. We’ve also got the front half of the cage welded ready for additional tubes into the engine bay. S2000 engine, bmw 8hp gearbox and mx5 rear subframe to come.

Ever wondered how much work it is to properly install mx5 subframes into a mk2 golf? The answer is s**t loads. has been...
15/08/2026

Ever wondered how much work it is to properly install mx5 subframes into a mk2 golf? The answer is s**t loads.
has been busy making sure that the subframes are properly mounted in the correct position whilst adding structure and strength as he goes. There’s still a fair amount of fabrication to do but the front subframe is in place. GDFAutofab Performance VW magazine

Vw 16v billet stainless steel exhaust manifold fl**ges on the website (pre-order- For early October)£195+vat plus worldw...
12/08/2026

Vw 16v billet stainless steel exhaust manifold fl**ges on the website (pre-order- For early October)
£195+vat plus worldwide shipping

05/08/2026

Exiting new product coming soon. Vw 16v kr, 9a, abf billet stainless exhaust manifold fl**ge. Pre-orders available, small batch to start with. £240 delivered to uk. Worldwide shipping also available, please get in touch.

Mk1 golf billet hubs + wishbones + big brakesOur billet hubs have been designed from the ground up with much larger whee...
04/08/2026

Mk1 golf billet hubs + wishbones + big brakes
Our billet hubs have been designed from the ground up with much larger wheel bearings and drive fl**ges, improved geometry and loads of adjustment. The adjustable wishbones are fully adjustable for track width and castor. The AP pro5000r calipers grab onto the 295mm PFC rotors to make the most of the space behind a 15” wheel. Together, this is the ultimate handling and stopping kit for your mk1 golf, Jetta, scirocco or caddy. Prices from £6500 with brakes Performance VW magazine PFC BRAKES AP Racing

Address

Unit 6 Firgrove Business Park
Cross In Hand
TN210QL

Opening Hours

Monday 8am - 8pm
Tuesday 8am - 8pm
Wednesday 8am - 8pm
Thursday 8am - 8pm
Friday 8am - 8pm
Saturday 8am - 8pm
Sunday 8am - 8pm

Telephone

+447828749423

Website

Alerts

Be the first to know and let us send you an email when GDF Autofab posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to GDF Autofab:

Shortcuts

Share

Category