Projex Motorcycle Engineers

Projex Motorcycle Engineers Projex motorcycle engineers are based in Cradley Heath West Midlands, and we can offer a variety of services for the motorcycle enthusiast.

Only just got Andy’s ZXR400 out of the van today from the Manx GP in August, bit of a delay as he’s been a bit of a girl...
11/12/2025

Only just got Andy’s ZXR400 out of the van today from the Manx GP in August, bit of a delay as he’s been a bit of a girl moaning about having a broken neck or something and other minor ailments 🫣, the only thing not damaged is the Projex dyno sticker.

How some of these bikes run is beyond me 😳 he rode this cbr600f3 in and he said it was a bit lumpy,
08/03/2025

How some of these bikes run is beyond me 😳 he rode this cbr600f3 in and he said it was a bit lumpy,

Well what do ya know more pictures of carburettor nastys, keeping your classic bikes on the road and running running swe...
10/09/2024

Well what do ya know more pictures of carburettor nastys, keeping your classic bikes on the road and running running sweet 👌, also support for your modern bikes we offer Woolich Racing ECU mapping, Kess 3 OBD,bench, and boot for diagnostics, reading and ecu back up.

Old school blow through turbo bandit engined GSXR1100 in today for set up, started with 154 and finished with 294@wheel ...
31/05/2024

Old school blow through turbo bandit engined GSXR1100 in today for set up, started with 154 and finished with 294@wheel and nearly 200 ftlb of torque, still more set up work to do and hopefully more power later after some modifications.

Let’s get a classic bike it will be fun they said 🫣 gpz900r, BMW R80, shell suit CBR1000f, zzr 600, bandit carbs, Yamaha...
23/03/2024

Let’s get a classic bike it will be fun they said 🫣 gpz900r, BMW R80, shell suit CBR1000f, zzr 600, bandit carbs, Yamaha TR1, LS650 savage in for a top end rattle then it stopped running, most of the others were carburettor problems and TR1 in for cdi repair transistor replacement.

Woolwich Racing now available for Triumph models see Woolwich racing site to see if your model is supported
03/02/2024

Woolwich Racing now available for Triumph models see Woolwich racing site to see if your model is supported

The latest release of the Woolich Racing Tuned (WRT) software adds support for the 2021-2022 Triumph Speed Triple 1200 RS

Features available for Triumph Speed Triple 1200 RS 2021-2022

- IAP Fuel Maps
- TPS Fuel Maps
- Ignition Timing Maps
- Electronic Throttle Valve (ETV) Maps
- Idle RPM
- RPM Limiter
- Fan Temperature
- Sprocket Size Adjustment
- Disable Evap / Purge Valve
- Disable Stock O2 Sensor
- Disable PAIR Valve / AIS
- Disable Top Speed Limiter
- Engine Data - View Live Engine Data
- Woolich Racing AutoTune - (Requires Applicable LogBox + Zeitronix Package)
- Diagnostics: Read and Clear Fault Codes - (Requires Applicable V3 Interface)

https://www.woolichracing.com.au/products/triumph/speed-triple-1200-rs/2021/2021-triumph-speed-triple-1200-rs-ecu-flashing.aspx

Don't just flash your ECU... Tune your bike to the limit with www.WoolichRacing.com

Cbr600 f4 week, two 1999 f4s in, one in for power loss and poor running, ram air filters in the air box had deteriorated...
07/11/2023

Cbr600 f4 week, two 1999 f4s in, one in for power loss and poor running, ram air filters in the air box had deteriorated allowing flies and filter foam into the carburettors, full strip and ultrasonic clean and run up on the dyno to make sure she’s back as mr Honda sent it out, other bike had full front fork overhaul including new British made fork tubes supplied by All bike engineering, KTech linear springs, K Tech slide bushes and lowers blasted and repainted.

Woolwich racing ecu mapping for Suzuki, Honda, Kawasaki, Yamaha, BMW, and Ducati motorcycles, Harley Davidson coming soo...
25/10/2023

Woolwich racing ecu mapping for Suzuki, Honda, Kawasaki, Yamaha, BMW, and Ducati motorcycles, Harley Davidson coming soon, see Woolwich racing website to see if your model is supported and features available in your ecu.
Fuel maps, ignition maps, exhaust set valve disable, o2 sensor disable, fan temps, top speed limiters disable, pair/sai valve disable ideal for race and track bikes when items are removed, live engine data and auto tune live for fuel mapping on the dyno.

Zx6R In for a carb clean and set up, to say they were a bit dirty was an understatement 😳, all ultrasonic cleaned and se...
08/09/2023

Zx6R In for a carb clean and set up, to say they were a bit dirty was an understatement 😳, all ultrasonic cleaned and set up making a healthy 94bhp@ wheel , XJR1200 for a strip, clean and setting up with pod filters ended up with a tad under 110bhp customer is over the moon with how she rides now 👍.

A blast from the past in this week, Rd125lc in for brake calliper rebuild, fork seals and wheels referbished in gold, so...
09/08/2023

A blast from the past in this week, Rd125lc in for brake calliper rebuild, fork seals and wheels referbished in gold, some two Stoke p**n with a 2 moto rg500 special, ktm990 adventure in for custom ecu map and a ZRX1100 in for valve clearance and carburettor jetting on the dyno.

Address

Unit 6 Spinners End Industrial
Cradley
B646BS

Alerts

Be the first to know and let us send you an email when Projex Motorcycle Engineers posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Projex Motorcycle Engineers:

Share