14/12/2014
Audi tt i detailed not long ago.. Received a full paintwork correction and enhancement detail , first the wheels were cleaned and in the back of the wheel to get rid of all brake dust , under the arch's were cleaned to remove all the road grime, the whole car were then snow foamed and washed. After that stage it recieved a full de-contamination including use of a clay bar and fall out remover , the car is then rinsed and dried. Final preparation checks are then made before masking up parts that are not machine polished. The tt recieved a 3 stage machine polish which consists of a heavy cutting ( to remove scratches and swirls) then a finishing compound polish ( to remove heavy cutting polish haze-holograms) then a enhancement polish otherwise known as a glaze (to replenish and condition the paint work) . After all the machine polishing, thorough checks are made to make sure all areas have been covered efficiently and accurately. A paintwork sealant is then applied to lock the results of the machine polish process in, after the sealant has bonded i went over with a high quality wax to enhance the shine and deepness of the wet look , when the paintwork is all done i continue to apply a heavy duty sealant to the wheels , then clean and seal all the windows. I apply a light amount of satin tyre gloss to all the tyres, dress any plastics and window rubbers. The door shuts are then cleaned and protected and the engine bay recieves a clean, the inside then recieves a full hoover and clean, was proud with the results from this detail!