Spire Bikes Service and Repairs

30/09/2026

A few more upgrades for this Trek Remedy.
- New Burgtec MK 3 Enduro Stem
- Fox 38mm Stanchion, 180mm Travel Fork Increasing travel by 10mm
- New Specialized Handlebar and 29” Front Wheel altering the Geometry to Mullet.
- New Headset Bearings and Brake Caliper Mount to accomodate the New Fork.
- Trek Knock Block adapter increasing clearance to prevent the fork hitting the frame downtube.
- New brake pads and hydraulic system bleed using SRAM dot fluid.
- 29” Maxxis Assegei Tyre installed with tubeless setup.

21/09/2026

Downhill Fork Upgrade for the Specialized Kenevo. The frame is rated for the dual crown fork allowing it to have the higher travel and stiffer forks fitted for more aggressive riding 🔥

17/09/2026

Trek Remedy in for Initial Service, Safety Check and Wheel Truing and New Headset Bearings Installed.

09/09/2026

This Trek Marlin came in for some replacement parts.

Work done:
- Replaced Rear Tyre
- Tightened Rear Bearing Cone Nuts (Had play in rear wheel) Torqued rear axle bolt 6nm.
- Replaced both brake systems. Internally routed hose and bled system.
- Checked and tightened all fasteners.
- Installed new rear mudguard.
- Test ride.

Parts:
Shimano Brakes
MAXXIS Tyre
RRP Mudguard

29/08/2026

BMX For sale £100. Used three times. Message for info.

22/08/2026

22/08/2026

Quick recap on some of the bikes we’ve worked on over the past few weeks/months.

22/08/2026

Rear shock bushings replaced on this Trek full suspension MTB and Brake and Gear shoft cables replaced with gear indexing on this kids Frog bike.

10/08/2026

Work underway on these two mtb’s.

Whyte:
New gear indicator screen
New shift cable
Realigned derailleur and b screw to hanger
Rear brake caliper realigned to stop rubbing
Gears indexed
Headset play tightened.
Safety check of all fasteners.

Trek:
Rear shock removed to install new shock mount bushings.

21/07/2026

Orbea MTB in for a general check over and new front inner tube.

We gave this one a good clean and polish too!