Light + Simple

22/04/2026

Excited to finally be printing in Aluminium for a reasonable price.

It would need a little hand finishing to be absolutely perfect but really impressed with the quality of this part.

01/06/2024

Not posted for a while but its always great to be sending out fresh parts 😍

08/08/2023

Its not perfect but for a budget scanner and only two spins on the turntable, its pretty impressive.

29/05/2023

Pretty impressed with 15 minutes playing with the Revopoint Range, bigger scan area makes all the difference!

14/04/2023

How the turns tabled... Looking forward to trying this out

04/01/2023

Another order finished and posted for inlet trumpets and resonator delete to suit Honda K20/24 (RSP Inlet Manifold)

20/11/2022

Something a little different, handle / tool for the wood burning stove split so made a new one from Peek, rated to maintain physical strength at 180c

31/10/2022

Gearbox oil cooler for a military helicopter, single part 3d printed in aluminium alloy, no supports, ready to bolt up.

Advanced Engineering Solutions applied geometry that could only be made through additive manufacturing to the redesign of a heat exchanger for the gearbox oi...

15/07/2022

F1 steering wheel showing off a long 3d printed clutch pedal

27/05/2022

Its amazing where this technology is going and the progress that is being made!

19/04/2022

First 30 minutes playing with the Pop 2 and I already have a pretty decent model done. Very impressed Revopoint Pop I'm sure this will only get better as I learn to use it.