Mid wales vapour blasting

Mid wales vapour blasting Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Mid wales vapour blasting, Automotive repair centre, Caersws.

Some ex worx BMW cylinders blasted for a customer in France 🇫🇷 could be the first of many as they struggle to get anythi...
09/05/2025

Some ex worx BMW cylinders blasted for a customer in France 🇫🇷 could be the first of many as they struggle to get anything done over with them 😎

First job of the year done for a returning customers latest project 🔧😎 great results as usual ✨ look forward to seeing t...
06/01/2025

First job of the year done for a returning customers latest project 🔧😎 great results as usual ✨ look forward to seeing the finished project

KTM 250 excf 22 for a full makeover today ready for a full rebuild with some performance upgrades being carried out by ...
24/10/2024

KTM 250 excf 22 for a full makeover today ready for a full rebuild with some performance upgrades being carried out by JW Motorcycle Repairs🔧🔧 looking better than new now 💥😎

Nice job this morning blasting some very rare BSA parts for returning customer 😎 💥 ✨
16/10/2024

Nice job this morning blasting some very rare BSA parts for returning customer 😎 💥 ✨

Few jobs through the blasters lately. One being a full R80 BMW motor for local bmw moto Scott in for a full restoration...
23/07/2024

Few jobs through the blasters lately. One being a full R80 BMW motor for local bmw moto Scott in for a full restoration. One set of crankcases for a BSA bantam and a set of Dt125 cases.

Last job of last week was a few air valves for a local haulage contractor doing a full nut and bolt restoration of one o...
22/01/2024

Last job of last week was a few air valves for a local haulage contractor doing a full nut and bolt restoration of one of his old Lorry’s. Results speak for themselves 😎💥

2002 KTM 520 motor stripped blasted serviced coated and rebuilt ready to return back to the midlands for a customers re...
19/12/2023

2002 KTM 520 motor stripped blasted serviced coated and rebuilt ready to return back to the midlands for a customers restoration project.

Few jobs blasted for 3 different customers yesterday. First being a set of throttle bodies which were powered coated bei...
15/06/2023

Few jobs blasted for 3 different customers yesterday. First being a set of throttle bodies which were powered coated being taken back to bare alloy. The next job was some side steps wiper arms and a window frame out of his boat and the last job was work for a returning customer with a very rare dt175 power pipe and re blasting of parts which someone else has previously blasted with a bad finish

First job of the morning doing some blasting for a returning customer having bought the project all ready been blasted ...
16/03/2023

First job of the morning doing some blasting for a returning customer having bought the project all ready been blasted elsewhere and not satisfied with the finish. Few hours in the blaster 💥 looking like a different motor ready to be reassembled 😎

Few parts blasted for a 2023 race bike currently being built ready for the upcoming season. All motor parts checked to b...
30/10/2022

Few parts blasted for a 2023 race bike currently being built ready for the upcoming season. All motor parts checked to be within service tolerance and rebuild

Stator cover blasted for a customer after removing it from the quad to replace the starter clutch assembly. Looking good...
24/08/2022

Stator cover blasted for a customer after removing it from the quad to replace the starter clutch assembly. Looking good as new might have to do the rest of the motor now 🙈😂

Job 4 was a cylinder head off a local classic trials bike builder specialist getting it blasted ready for rebuild 😎
01/07/2022

Job 4 was a cylinder head off a local classic trials bike builder specialist getting it blasted ready for rebuild 😎

Address

Caersws
SY175EQ

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm
Saturday 9am - 5pm

Telephone

+441686688222

Website

Alerts

Be the first to know and let us send you an email when Mid wales vapour blasting posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Mid wales vapour blasting:

Shortcuts

Share

Category