The Super Sport Shed

12/10/2026

Honda CBX1000 front cam chain guides are back in stock. We do have limited numbers!

Honda CBX1000 replacement 'A' Cam Chain Guide. This fits all model of the CBX1000 range. OEM part number 14520422000 This item comes with a replacement pin.

05/10/2026

As you know, family is at the core of The Super Sport Shed. Therefore, Leo will be taking a small Half Term break

We will be closed from the 23rd of October through to the 31st of October.

Any orders placed before 9.00am GMT will be despatched on the 23rd, with remaining orders going out on the 2nd of November.

Thank you for your continued support

Leo and the Team

30/09/2026

Everyday brings something new in The Super Sport Shed

This is even a new one for me, accelerator pump diaphragm installed completely wrong. Amazingly this bike did run fairly well, but multiple homemade modifications to the carbs caused them not to shut off on idle.

All rectified and fit it back on the bike and running like a dream.

As a side note, as we move into winter and bikes go into storage, many of you will be looking to have work carried out by us. At present we are booking into early next year so please be aware that there will be lead times on many jobs that we carry out.

If you need us to look at something, please get in touch. Either through Facebook messenger, email or phone?

[email protected] / +441258722148

Thanks
Leo

15/09/2026

It's not all engine and carbs down at The Super Sport Shed, we also carry out general maintenance and recommission works.

This came in with operational brakes, but needed some love. I've swapped out the pads and changed the fluid and they are back to tip top (for a CBX) condition. And as per usual, I'm also doing the carbs!

We stock a vast range of brake parts for both the Z and Prolink models.

https://thesupersportshed.com/?s=Brake+&post_type=product&dgwt_wcas=1

07/09/2026

It's been a busy few weeks in The Shed, and the keep coming in!

20/08/2026

Back to work with a bang after another summer holiday with the family!

Once again thank you for all the orders while we were away. The online shop is a massive part of the business and helps me carry on working on the engines and carbs.

Back on the workshop side, a very good member of the Honda cb1100r club has sent over a tool to help us extract the studs on a set of CB1100r barrels. We were chatting a couple of weeks ago and he suggested that a tool he has might work and it's always fun to try something new.

Stay tuned to see how I get on!

06/08/2026

We've hit the ground running after our first family holiday of the summer. Thank you to everyone who ordered while we were away and hopefully the majority of you have now got your orders.

On the workshop side, it's been a busy week of carb rebuilds. The pictures below. So what modern fuel is doing to carburettors. There was a leak from the fuel inlet brass hose as you can see the o-rings are a little past their best. And it didn't get any better inside the float bowls. These will get a full strip a dip in the ultrasonic cleaner and then we'll be reassembled with all new o-rings.

We also have some new items on the website which include pressing slow running jets. These are aftermarket items and have come from a very reliable source on the continent. These are up on the website and the link is below.

As another reminder, I will be at Oulton park on the 14th of August, I will be taking a few days off after the weekend to spend with the family as well.

https://thesupersportshed.com/product/honda-keihin-press-in-slow-running-jet-35/?currency=GBP

13/07/2026

Just a quick reminder that we will but shut for some R & R from Wednesday the 22nd of July

08/07/2026

This Honda CB1100r is in for a variety of work including an upgraded starter clutch. You can see from this video that the bolts on the existing one had worked loose which it calls starting engagement issues. We have a modified Yamaha R6 starter clutch to fit, so this won't be an issue.

It's always worth checking these bolts and it's fairly easy to take the cover off. If you're careful you can save and reuse the gasket!

02/07/2026

July is always a busy time for Leo in The Super Sport Shed with work and family commitments!

The Shed will be running limited hours over the next few days due to family commitments. We will aim to get orders out asap.

The Shed will be closed while Leo and the family are away. This will be from the 2nd of July, returning on the 3rd of August. Any orders and enquiries in this time will be dealt with on the 3rd.

We are also attending the Classic Bike Trackdays Oulton park event. so will also be away from the 13th of August for a week.

Thanks
Leo and the Team