Custom Creations Detailing

13/08/2026

New client following on from a recommendation.

This BMW M4 has clearly had some sort of past life.

OEM 18" wheels replaced by 20" with a very aggressive lowering set of springs, wheel spacers and carbon styling kit.

Here's where the problems start.

The quality of the carbon kit and fitment is questionable at best. Many of the parts either don't fit or are so badly damaged they are hanging off.

If you've seen our story you'll have seen the rear diffuser. There's no excuse for this sort of poor workmanship... ever!

After removing all the various carbon parts the following CT Carbon accessories have been fitted

➡️ Front bumper lower corners and spiltter
➡️ Sills
➡️ Rear diffuser
➡️ Rear spoiler

We have explained the issues to the client and recommended he looks to address some of them.

The tyres are rubbing on the arch liners and wearing badly due to poor alignment.

If you are fitting aftermarket accessories to your car always do your homework.

Will they affect the car in any way?
Will you need to do other work to correct any issues created?

Just because something looks sporty doesn't mean your car will agree.

13/08/2026

Refresh on Tony's 2019 RS3 ✅

Having worked on this RS3 for many years now it's safe to say we know this car.

Tony wanted to reset the cars protection and give it a lift.

The decision was made to take the opportunity to add PPF and a fresh ceramic install.

profilm_ppf Ultra Clear Pro has been applied to

✅ Bonnet
✅ Front bumper complete
✅ Headlights
✅ Filler cap
✅ Rear bumper top

titancoatings ceramic applied

➡️ PX10 and Apollo applied to the paintwork
➡️ Apollo applied to all the PPF

Wheels removed and deep cleaned.
Calipers cleaned. Tyres dressed.

Interior and glass cleaned.

One sorted RS3 again.
_____________________________________
🖥️ www.customcreationsdetailing.com
📧 [email protected]
📞 07716688971
💳 Debit and credit cards welcome
🏛️ 24/7 4K CCTV with motion alert
🚙 Fully insured including road risk
✅ Full PDF paintwork report included
_____________________________________
✅ The International Detailing Association UK Chapter - IDA UK - 2026 member
✅ IDA UK Skills Validated
✅ IDA UK Certified Detailer
✅ titancoatings approved partner installer
✅ ProFilm Approved Centre (PAC)

08/08/2026

https://youtu.be/02gvG0K4HVo

The Corvette left us this morning looking epic and definitely protected. 👊

Second Corvette for this client having previously fully wrapped his...

07/08/2026

2021 Yaris GR Circuit we previously worked on a while ago back in for a program of works to bring it back to its former glory.

Decon wash and lap round with the tar remover to see what we are working with.

04/08/2026

Great progress on the Corvette.

Most of the passenger side now sorted, many of the front bumper parts done and windscreen sorted too.

Wheels off ready for cleaning and coating.

03/08/2026

2025 Corvette Z06 in for a bespoke ProFilm Ultra Clear Pro PPF package.

26/07/2026

To say the M3 has had a big refresh would be a massive understatement!

To start this one, full exterior decontamination package and top up with Titan Ultra 7.

The owner asked if we could finish off the carbon package and remove the factory gloss black parts.

So that's exactly what we did for the first phase of this project.

CT Carbon parts list

✅ Front bumper corners
✅ Open mouth grille insert
✅ OEM style sills
✅ Front wing inserts
✅ Roof aerial cover
✅ Rear bumper corners
✅ Diffuser surround

With this being our first serious carbon conversion we have picked up a selection of tools to ensure we have everything to hand.

New Gen BMW plastic rivets and panel bond used to attach the sills.

The front bumper corners and sills have been protected with profilm_ppf Ultra Clear Pro and then coated with Titan Apollo.

To ensure the best possible results the front bumper has been re-wrapped with PPF and a modified template used for the front number plate location.

As standard these front bumpers run a front number back bracket. There was no way this was going to be refitted and wreck the front appearance. Thanks to Plateless the new number plate supplied by FullhouseCustoms will be magnetically mounted 👌

Rear passenger wheel needed a refurb. All sorted thanks to The Wheel Specialist and then coated with Titan Pyro.

The rear drivers seat had been involved in an incident with a dehumidifier sack causing incredible amounts of damage! Only solution was to source a replacement full back seat.

Thanks to an epic find on ebay a complete low mileage seat was overnighted.

Next up... Flinteriors Repairs to sort the drivers bolster and clean all the interior leather. Like new 👊

Vacuumed, glass cleaned, tyres dressed with Garage Therapy Tyre Serum.

Final verdict... Fresh as 💚

23/07/2026

The iX M70 we recently protected was back in this morning for it's first wash and PPF edge check.

All sorted and full warranty issued.

20/07/2026

M Series BMWs have always been a very popular vehicle for us to work.

M5 recently completed and now M2 and M3 in with us.

18/07/2026

Every now and again you have to have a moment to realise quite how lucky you are when clients make you their first port of call.

Both of those cars are from long standing clients and due in over the coming month.

Absolutely crazy!

When you have a vision to build something from nothing you often find what you end up with is very different.

We never dreamed we'd be privileged enough to do what we do and you guys make us your first choice.

You make us what we are and that's a very emotional feeling.

Thank you... 💚