Scooter Engine ATTIC

Scooter Engine ATTIC LAMBRETTA , VESPA . ENGINE BUILDS FOR FUN

22/08/2025

Quick action throttle

My old Gp200 one owner from new now running a TS225 ongoing at the moment nearly there.thanks to Dick Bramham
22/08/2025

My old Gp200 one owner from new now running a TS225 ongoing at the moment nearly there.thanks to Dick Bramham

Vespa t5 picked up locally from Graeme Lodge and refirbed by Dave Doremro .. many thanks guys
22/08/2025

Vespa t5 picked up locally from Graeme Lodge and refirbed by Dave Doremro .. many thanks guys

22/08/2025

Running RT195 big thanks to Dick Bramham

Been a while so here's the last two builds .. rt195 into gp150.. Dick Bramham build .. talented man
22/08/2025

Been a while so here's the last two builds .. rt195 into gp150.. Dick Bramham build .. talented man

As its not stopped raining I thought I might get something to do indoors.....
03/04/2024

As its not stopped raining I thought I might get something to do indoors.....

So into the new year and a vespa Vba engine to build with vbb guts at a fairly std spec .stripped and cleaned new bearin...
23/12/2023

So into the new year and a vespa Vba engine to build with vbb guts at a fairly std spec .stripped and cleaned new bearings seals and gasgets cylinder and piston were all good so will go back on ... in need of a std carb box top if any about..Happy Christmas all..

Cylinder studs removed cleaned and refitted but the correct way round enabling the head nuts more than a few threads so...
06/10/2023

Cylinder studs removed cleaned and refitted but the correct way round enabling the head nuts more than a few threads so they don't strip any threads when torqued up ...

Seals done , bearings done, superglue removed from under kickstart cog spring
06/10/2023

Seals done , bearings done, superglue removed from under kickstart cog spring

Old bearing out new 9 ball in.sealing pad repaired with epoxy metal and worked back to correct level . Grooves
01/10/2023

Old bearing out new 9 ball in.sealing pad repaired with epoxy metal and worked back to correct level . Grooves

Cleaned up ready to go together. New gaskets , seals and bearings.someone had this apart in the past using screwdrivers....
28/09/2023

Cleaned up ready to go together. New gaskets , seals and bearings.someone had this apart in the past using screwdrivers..

Another px engine to strip and rebuild. Running but with little power. Air leaking at poorly fitted gasket by the way it...
18/09/2023

Another px engine to strip and rebuild. Running but with little power. Air leaking at poorly fitted gasket by the way it looks...

Address

THE ATTIC
Barnard Castle
DL128QF

Telephone

+447778575015

Website

Alerts

Be the first to know and let us send you an email when Scooter Engine ATTIC posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Scooter Engine ATTIC:

Shortcuts

Share

Category