Migtek Car Welding Specialists

Migtek Car Welding Specialists Welding and exhaust modifications, All work done to M.O.T standards. All work carried out to M.O.T standards.
(2)

Vehicle Welding Specialists
All Work Done To MOT Standards
Custom Stainless Exhausts
Flexi & DPF Repairs
Alloy Wheel Straightening
Alloy Wheel Repairs
MOT Testing Available
Tyre Supply & Fitting All welding work undertaken from small patches to complete sills, body panels and floor pans. Alloy locking nut removal

We are based in Aberdeen.

This Mitsubishi Sh**un was in with us for a full stainless steel DPF-back exhaust system after the original exhaust fina...
17/08/2026

This Mitsubishi Sh**un was in with us for a full stainless steel DPF-back exhaust system after the original exhaust finally reached the end of its life.

A perfect upgrade to keep this Sh**un on the road for many more years to come — stronger, longer-lasting, and built to handle whatever’s thrown at it.

Get in touch for custom exhaust systems, repairs, and stainless upgrades for all makes and models.

Subaru Impreza WRX STI was in with us for a custom interchangeable sports cat and decat section, built using V-band clam...
14/08/2026

Subaru Impreza WRX STI was in with us for a custom interchangeable sports cat and decat section, built using V-band clamps for quick and easy swapping between the two setups.

Manufactured in-house from quality stainless steel for a perfect fit, improved flow, and long-lasting durability. Whether it’s road use or track days, this setup gives the owner the flexibility to change in minutes.

If you’re looking for custom exhaust fabrication, performance upgrades, or repairs, get in touch – we’d be happy to help! 🛠️💨

🚗 Golf R32 in for a resonator delete! 🔥This Golf R32 came to us after unfortunately failing its MOT due to a major exhau...
12/08/2026

🚗 Golf R32 in for a resonator delete! 🔥

This Golf R32 came to us after unfortunately failing its MOT due to a major exhaust gas leak. On inspection, we found the centre resonator had completely failed.

The quickest and most cost-effective solution was a stainless steel resonator delete, restoring the exhaust system and getting it ready to pass its MOT.

As an added bonus, it gives the iconic R32 engine a deeper, sportier exhaust note without being over the top. 👌

If your exhaust has failed or you’re looking to improve the sound of your car, get in touch to see how we can help!

Stage 2 Mk7.5 Golf R in the workshop! 🔥This one came in for a set of Vibratechnics Fast Road engine and gearbox mounts, ...
10/08/2026

Stage 2 Mk7.5 Golf R in the workshop! 🔥

This one came in for a set of Vibratechnics Fast Road engine and gearbox mounts, along with a full oil service using Fuchs Titan Race Pro S 5W-40. All parts were supplied and fitted by us, leaving the car ready for many more miles of spirited driving.

Whether it’s performance upgrades or routine servicing, we’ve got you covered. Get in touch to book your car in! 💪🚗

As cars get older, genuine replacement parts can become impossible to source — but that doesn’t mean your pride and joy ...
07/08/2026

As cars get older, genuine replacement parts can become impossible to source — but that doesn’t mean your pride and joy has to be off the road. 🔧✨

This Rover came in needing a custom rear section, and when OEM parts aren’t available, custom fabrication is the only option. We’ve worked hard to keep it as close to the original design as possible while ensuring a perfect fit and long-lasting quality. 👌

Another classic kept going the right way! 🚗💨

📩 Get in touch for custom exhaust work, repairs, and fabrication.

We’ve been sitting on this one for a while as the customer had a few finishing touches to complete before we could share...
05/08/2026

We’ve been sitting on this one for a while as the customer had a few finishing touches to complete before we could share it!

This GT86 K20-swapped build came to us for a K Power Industries RHD manifold and a modified exhaust bracket, both supplied and fitted in-house.

It was only a small piece of a much bigger project, but we’re proud to have played a part in such an awesome build. The car is now finished, out on the road, and we’re sure it’s putting a smile on the owner’s face every time it gets driven! 🔥

Need performance parts supplied and fitted, custom fabrication, or exhaust work? Drop Migtek a message and let’s get your project moving! 🔧

Big power Fiesta ST in recently to have a resonator welded in to reduce exhaust drone. Space was tight, but we managed t...
03/08/2026

Big power Fiesta ST in recently to have a resonator welded in to reduce exhaust drone. Space was tight, but we managed to get it fitted and it should make a noticeable difference while keeping the performance.👌

While it was up on the ramp customer asked if we could fit a nice Airtec motorsport chassis brace also!

Next step will be a larger free-flowing rear silencer to reduce the drone even further.

📩 Get in touch for all your custom stainless exhaust and performance fabrication needs!

Blast from the past! 🔥This classic Ford Fiesta XR2 was in with us for a stainless steel manifold and a fully custom stai...
31/07/2026

Blast from the past! 🔥

This classic Ford Fiesta XR2 was in with us for a stainless steel manifold and a fully custom stainless cat-back exhaust.

It definitely turned a few heads around the estate—these were hugely popular back in their day, and it’s easy to see why! Just like the Fiesta STs of today, the XR2 has a special place in many enthusiasts’ hearts.

Great to see another classic back on the road sounding as good as it looks! 👌

📩 Get in touch for all your custom stainless exhaust and fabrication needs.

Something a bit different for us! 👀A good customer asked if we could fit a dash cam as a bit of extra peace of mind afte...
30/07/2026

Something a bit different for us! 👀

A good customer asked if we could fit a dash cam as a bit of extra peace of mind after recently being involved in an accident. We were more than happy to help – you can never be too careful these days.

We supplied and fitted a front and rear dash cam, with all wiring professionally hidden away for a neat, factory-style finish. No messy cables, just a clean installation ready to capture every journey. 📹🚗

Audi RS3 downpipe in for a new 3.5” premium stainless steel flexi after the original had somehow worn a hole through.A f...
13/07/2026

Audi RS3 downpipe in for a new 3.5” premium stainless steel flexi after the original had somehow worn a hole through.

A fresh stainless flexi has been expertly welded in and it’s now ready to be refitted. Time to get that legendary 5-cylinder soundtrack back where it belongs! 🔥

Need exhaust repairs or custom stainless fabrication? Get in touch – we’re always happy to help.

Address

Unit 8, Greenrole Trading Estate, Howemoss Drive
Aberdeen
AB210GL

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Alerts

Be the first to know and let us send you an email when Migtek Car Welding Specialists posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share