Speed Tec Tuning

11/09/2016

Genuine SPEED-TEC spare/option part.

Aluminum isolator with special polyether inserts for the mounting bolts and two heat shielding plates.

The polyether bushings and heat shielding plates guarantee an optimized thermal insulation of the carb compared to the stock isolator. This prevents fuel v***r locks even at high ambient tempratures, which usually results in engines running too lean; especially in the long run.

This isolator is highly recommended for competition use and any modified engine.

Total height of the complete unit, including heat shielding plates and all gaskets: 24.7 mm

25/07/2016

crank version 2
new crank ignition version 2
with even more chill achievement, clearly better induction for an easier starting
Load corner of the fan conformistly, for maximum torque exploits and ex-breath Going about

16/07/2016

too a pity, a good crankshaft must be repaired

03/03/2016

Speed Tec fuel gun
Fuel gun to extremely rapid filling of the tank
Residual fuel can be sucked in seconds from the tank.
The gun is equipped with a venting check Ventiel.
At hose is a stopcock .The gun is gasoline and oil resistant. Capacity is 500ml

04/02/2016

compression tool for crankshaft

27/10/2015

320 Speed Tec 6 Port Crank version ready
http://shop.st-tuning.de/product_info.php?info=p317_speed-tec-320-crank-6-kanal.html

15/10/2015

15/10/2015

The SPEED-TEC 6-port genuine Zenoah 320
More power and torque through the two additional transfer ports

25/08/2015

a new tool made 4 Bolt Template for 230

25/08/2015

Because of the high demand was a bit manufactured

13/08/2015

12/08/2015

beautiful my logo on the piston