Motorservice Group

22/09/2026

17/09/2026

▶️ Out-of-round cylinders ◀️

When machining the cylinder bores, it is essential to make sure that the geometry is perfect. Piston rings can still seal slightly oval cylinders. However, sealing becomes difficult for 3rd and 4th order out-of-roundness. These often occur due to tensile stresses from the cylinder head bolts. The crescentshaped gaps caused by out-of-roundness between the piston ring and cylinder will result in leaks.

👉Consequence: Poor performance, excessive oil consumption and engine damage
🛠️Remedy: Observe cylinder head tightening specifications or eliminate out-ofroundness during cylinder machining

16/09/2026

Wir haben noch einen übrig! 👀
Die Einführungswoche ist zwar vorbei, der Spaß aber noch lange nicht. Unsere Azubis und Dualen Studenten haben da noch was vorbereitet. 🤝😅

13/09/2026

Motorman Run 2026 - wir waren dabei! 🏃‍♂️💪 47 Hindernisse pro Runde, Matsch und Dreck, aber vor allem mega gute Stimmung und richtig viel Spaß! Wir freuen uns schon aufs nächste Jahr! 🤩 Motorman Run

08/09/2026

Die erste Woche unserer neuen Auszubildenden und Dualen Studenten ist vorbei.😊 Die Einführungswoche diente vor allem zum Ankommen, Kennenlernen und Fragen beantworten. Jetzt kann es richtig losgehen!🚀

05/09/2026

❄️Effiziente Kühlung für maximale Performance! ❄️

Ob Klimakompressoren, Wasserpumpen oder Radiatoren – modernes Thermomanagement sorgt dafür, dass Motor, Batterie und Innenraum jederzeit optimal temperiert sind. Unsere Komponenten in OE‑Qualität sichern Komfort, schützen vor Überhitzung und steigern die Lebensdauer wichtiger Fahrzeugsysteme.

🚗Für Verbrenner, Hybrid & Elektro – zuverlässig. leistungsstark. smart.

04/09/2026

🔌Electrical circuits in the vehicle⚡

The electronics in vehicles are specifically divided into different functional areas (system circuits). Within the central vehicle electrical system, components – ranging from engine management through safety functions and airbags to infotainment – are organised into logical sub-circuits. Control units and sensors communicate constantly with one another via networked data buses such as CAN or FlexRay. 🔄📡
This clear structure ensures that power is distributed precisely, faults remain isolated, and critical systems continue to operate reliably even in the event of partial failures.

🔋 On‑board power supply (12 V/48 V)
🚀 Powertrain & engine control
🛡 Driving dynamics & safety
🚘 Chassis & comfort
📱 Infotainment & communication
👁️ Driver assistance (ADAS)

02/09/2026

🎉Welcome to the team! 👋

We are thrilled to welcome 10 new faces to MS Motorservice International and MS Motorservice Germany. 👥🌍
We are very excited and wish our new trainees and dual students of 2026 a successful start! 🚀

Feel free to follow us for more insights into our orientation week. 👀📲

28/08/2026

🧠Control units are the electronic brains of modern vehicles. They process the information recorded by sensors, compare it against a stored characteristic map, and then activate the relevant actuators. Each control unit specialises in a specific functional area – ranging from engine and transmission management, through driving dynamics and safety, to comfort and assistance systems.

💻Modern control units consist of high-performance microcontrollers, memory modules, input and output stages, and complex software functions that operate in real time. They are networked via bus systems such as CAN, LIN, FlexRay or Ethernet, enabling the coordinated control and monitoring of all vehicle functions. Without control units, today’s efficiency, safety and assistance systems would not be possible.