greenBEAR

greenBEAR Das greenBEAR Formula Student Team entwickelt und baut jedes Jahr einen elektrischen Rennwagen. Entscheidend ist aber nicht allein dessen Performance.

HTW Motorsport ist ein studentisches Projekt an der Hochschule für Technik und Wirtschaft Berlin. Ziele dieses Projektes sind die Konstruktion, Fertigung und Vermarktung eines Formel-Rennwagens, sowie die erfolgreiche Teilnahme an einem internationalen Hochschulwettbewerb – der Formula Student. Ende der 70er Jahre wurde dieser Konstruktionswettbewerb von der Society of Automotive Engineers als Formula SAE in den USA ins Leben gerufen. Seit 2006 findet die Formula Student, veranstaltet vom VDI, nun auch in Deutschland statt, somit ist der HTW-Motorsport von Anfang an dabei. Unter Beachtung verschiedener Maßgaben soll ein Rennbolide gebaut werden. Wichtige Kriterien sind auch die Konstruktion, Finanzplanung und Verkaufsplanung. All diese Aspekte werden am Rennwochenende in Hockenheim bewertet. Dazu tritt das Team mit seinem Fahrzeug in verschiedenen dynamischen und statischen Disziplinen an. Eine Jury von Experten aus der Automobil- und Zulieferindustrie schaut den angehenden Ingenieuren über die Schulter und bewertet jeden Aspekt des Fahrzeugs. Durch die Teilnahme an diesem Projekt zeigen Studenten Eigeninitiative und Engagement, erhalten aber auch tiefgreifendes und fundiertes Wissen über die reguläre studentische Ausbildung hinaus. Zusätzlich werden die Soft Skills jedes Einzelnen gefördert. Dies und die Kontakte zur Industrie, welche während des Projektes geknüpft werden, verschaffen ihnen zukünftig einen Wettbewerbsvorteil auf dem Arbeitsmarkt. Dieses Jahr nimmt das HTW-Motorsport Team bereits zum zehnten Mal in Folge an der Formula Student Germany teil. Mit dem BRC15 (Berlin Racing Car 2015) wird das Team eine komplett neue Generation Berlin Racing Car auf den Asphalt loslassen.

 tank you so much for the support. We highly appreciate it. 💚🐻
21/09/2026

tank you so much for the support. We highly appreciate it. 💚🐻

Thank You  for your support this Season! 💚🐻
15/09/2026

Thank You for your support this Season! 💚🐻

Thank You to all our Silver Supporter of this season! We couldn't thank you all enough for the support.  official      d...
14/09/2026

Thank You to all our Silver Supporter of this season! We couldn't thank you all enough for the support.

official




de






Huge thank you to all our Bronce Supporters this year. The season wouldn't have been possible without you all.💚🐻        ...
13/09/2026

Huge thank you to all our Bronce Supporters this year. The season wouldn't have been possible without you all.💚🐻











official








group nv pilsner






TEAM STATEMENT
07/09/2026

TEAM STATEMENT

FSPoland Day 6:Today was the big day. The 22km Endurance race.Following yesterday's Autocross session, we identified a d...
30/08/2026

FSPoland Day 6:

Today was the big day. The 22km Endurance race.

Following yesterday's Autocross session, we identified a delamination issue in our monocoque that required immediate action. The entire morning was spent in the pit box performing composite repairs to restore structural integrity.
A huge thank you to , , , .racing for lending us materials, tools, and hands to get the job done.

Thanks to that combined effort, we cleared re-inspection and lined up in the out-of-order running slot to start our stint.

After completing the opening laps, an unexpected electrical issue surfaced on track, forcing us to retire early from the run.
While an endurance DNF is a tough outcome after an intense week, getting the car prepped, inspected, and across the dynamic stages with our entire crew was a major achievement.

📸: .ls_

FSPoland Day 5Today was Track Day.We started the morning with the acceleration and skidpad event, where we secured our f...
29/08/2026

FSPoland Day 5

Today was Track Day.

We started the morning with the acceleration and skidpad event, where we secured our first two runs and times. Afterwards we went straight to the pit to do some checks and a fast driver change, before we went back on the track again.

Our best official times from the morning sessions:

- Acceleration: 5.295 s
- Skidpad: 6.068 s

In the afternoon, we prepped the car for Autocross and successfully had our first run. A minor issue with the chassis mounting led to a disqualification on our final run of the day, but the team resolved the issue in the paddock in the evening and also today in the morning.

- AutoX: 01:15.696 s

With the car prepared and technical checks done, we are ready for the main event: the 22 km Endurance race.

📸:

FS Poland - Day 4Our fourth day started with the Cost and Manufacturing Event (CME), where we defended our production ch...
28/08/2026

FS Poland - Day 4
Our fourth day started with the Cost and Manufacturing Event (CME), where we defended our production choices and cost calculations in front of the judges.

Right after CME, we queued for the tilt table test, which was open already for cars that passed mechanical and accumulator. Our BEAR cleared the 60-degree tilt smoothly, and we moved straight into our electrical re-scrutineering slot, which we officially passed.

We rolled directly into the rain test just as golden hour hit the circuit, making for a scenic picture before pushing straight over to the brake test. The car locked all four wheels on the very first attempt and secured the final stickers required to make us ready for the track.

To wrap up a long day, we took part in the official flunkyball tournament and secured our first win of the event

All technical checks are complete, and we are fully set for the dynamic disciplines tomorrow.

📸:

FSPoland Day 3:We started the day early in the morning with our first static disciplines: the Engineering Design Event (...
27/08/2026

FSPoland Day 3:

We started the day early in the morning with our first static disciplines: the Engineering Design Event (EDE) and afterwards the Business Plan Presentation (BPP), where we presented our BEAR26`s technical concepts and fictional business idea to the judges.

Right after the statics, we headed straight back to the scrutineering tents for re-inspection. We resolved yesterday's open points, successfully passed both the accumulator and mechanical scrutineering, and secured our first two official stickers on the car.

In the evening, we entered electrical inspection. While we made solid progress, a few points remain open, meaning we did not get the final pass today and will head into electrical re-scrutineering tomorrow again.

📸:

FS Poland – Day 2:The second day was all about scrutineering, the rigorous technical inspection where every single detai...
26/08/2026

FS Poland – Day 2:

The second day was all about scrutineering, the rigorous technical inspection where every single detail of the race car is checked against the rulebook.

We narrowly missed getting the final checkmark in both the accumulator and mechanical scrutineering sessions today. In both cases, only minor adjustments and formal details are required, which the team is already addressing. We are in a solid position moving forward.

Between the inspection slots, we joined the rest of the paddock on the main straight for the official panorama and team photo.

Tomorrow morning, we head straight into re-scrutineering to clear the remaining items and get the car out on track as soon as possible.

Keep an eye on our story for live updates from the pit garage and fingers crossed for the stickers tomorrow!

📸:

Adresse

Wilhelminenhofstraße 75 A
Berlin
12459

Benachrichtigungen

Lassen Sie sich von uns eine E-Mail senden und seien Sie der erste der Neuigkeiten und Aktionen von greenBEAR erfährt. Ihre E-Mail-Adresse wird nicht für andere Zwecke verwendet und Sie können sich jederzeit abmelden.

Verknüpfungen

Teilen