13/02/2026
🇨🇿 Každý speciální projekt, kterým se v IPEX - TATRA dealer zabýváme, je jedinečná technická výzva. Když se navíc skloubí s mimořádným provedením podvozku TATRA, o to větší radost je z konečného (v tomto případě průběžného) výsledku.
Jedním z takových projektů, které v IPEX - TATRA dealer řešíme, jsou individuální úpravy kabin pro vozidla TATRA PHOENIX v provedení 16x16. Dva kusy těchto podvozků vznikly v TATRA TRUCKS pro australského dealera Offroad Trucks Australia, se kterým máme tu možnost a čest již několik desetiletí spolupracovat.
Podvozky TATRA PHOENIX v konfiguraci náprav 16x16 jsou určeny ke kompletaci s výškovými plošinami Bronto Skylift. Právě z důvodu montáže tohoto typu nástaveb bylo nezbytné upravit kabiny vozidel tak, aby plošiny mohly zasahovat i do prostoru nad kabinou, kde by v případě použití standardních kabin TATRA PHOENIX nové generace došlo při kompletaci s nástavbou ke kolizi. Proto jsme dle požadavku Offroad Trucks Australia střechy kabin upravili (snížili), a to včetně navazujících částí v interiéru kabiny.
Jsme rádi, že se na tomto projektu můžeme prostřednictvím námi realizovaných speciálních úprav podílet, a těšíme se na konečný výsledek!
🇦🇺 Every special project that we deal with at IPEX – TATRA dealer is a unique technical challenge. When combined with the extraordinary design of the TATRA chassis, the greater is the joy of the final (in this case, ongoing) result.
One of such projects that we solve at IPEX – TATRA dealer are the individual modifications of the cabins for the TATRA PHOENIX trucks in the 16x16 version. Two of these chassis were created by TATRA TRUCKS for the Australian dealer Offroad Trucks Australia, with whom we have the opportunity and honor to cooperate for several decades.
TATRA PHOENIX chassis in the 16x16 axle configuration are intended for completion with Bronto Skylift high platforms. Due to the installation of this type of superstructure, it was necessary to modify the vehicle cabins so that the platforms could also extend into the space above the cabin, where a collision would occur when assembling the superstructures with the standard TATRA PHOENIX cabins. Therefore, according to the request of Offroad Trucks Australia, we modified (lowered) the cabin roofs, including the following technical parts in the cabin interior.
We are happy to be able to participate in this project through the special modifications we have implemented, and we look forward to the final result!