NOx sensor -Oetex

20/01/2022

Product Description
The NOx (Nitrogen Oxide) Sensor is used in diesel vehicles to detect the level of NOx gas emitting from the engine. Because of strict government emissions regulations, it is imperative that all owners of vehicles outfitted with this sensor make certain that their vehicle is operating in full compliance. CARDONE NOx Sensors are high-performing, real-world tested units that reliably notify the driver of high NOx levels, keeping the vehicle in compliance.
Features and Benefits
Rust-resistant for longevity
Direct plug-and-play fit for a simple installation
All components and hardware included to get vehicle back to normal operating condition
Real-world tested for proper functionality and performance

20/01/2022

The NOx sensor is part of the NOx reduction aftertreatment system used in diesel vehicles with urea based SCR systems. The sensor located upstream of the SCR catalyst directly measures the engine-out NOx gas concentration, which helps determine the optimum amount of urea injection.

20/01/2022

NOx Sensor Repair Tips
Diesel NOx Sensors feature complex technology. Here are some repair tips to keep in mind:

A degraded doser valve (DEF injector) may set NOx DTCs
Be sure to test the doser valve before replacing NOx sensors
After replacing a NOx sensor, be sure to check service information for any reset procedures
NOx sensors can't tell the difference between NOx and ammonia
Performing a DPF regen will release ammonia from the SCR catalyst

06/11/2021

Babybus will be back on the school run this afternoon, new nox sensor and module update

02/11/2021

28/10/2021

Our new factory is under construction!

24/10/2021

AUDI Q7 also use NOX sensor, the nox sensor will replace the oxygen sensor

18/10/2021

For MAN/COMMUINS/BENZ/BMW/SCANIA/DAF/UNINOX/HINO/VOLVO/GM etc.

26/09/2021

24/09/2021

Let's take a look at the NOx sensor

18/09/2021

Can I drive with a faulty NOx sensor?

A bad knock sensor may also not let the engine accelerate properly while driving on the highway, and cause the vehicle to lose fuel mileage. ... Once the computer realizes the knock sensor is not working properly, your vehicle will most likely lose power.

18/09/2021

What happens when a NOx sensor fails?

What happens when the NOx sensor fails? If a NOx sensor fails, the vehicle can have multiple faults on the dashboard which will put your car into limp mode. NOx sensors are directly linked to the SCR system. There will also be emission and general SCR system faults.