Wie lautet die Website?

https://www.facebook.com/108409961033474/

felgenfetisch, Lucerne (2026)

08/10/2026

🔥🔥FOR SALE🔥🔥
Yokohama Advan TC-4
Front & rear: 8,5x18" ET45
Lug pattern: 5x100
Center bore: 63.1mm
Price: CHF 1900 / EUR 2050

These flow formed, ultra light Yokohama Advan Racing TC-4 come in sparkling Racing Gun Metallic. With 8,5" all around, they are a perfect fit for many all wheel drive Subarus, such as the Impreza or WRX or the rear wheel drive Subaru BRZ, its sister model the Toyota GT86 and the successor, the GR86. The wheels have "GTR" concave faces, which look incredibly nice and give each car a stanced look.

All 4 wheels are brand new and were never mounted on a car. All spoke decals and new black valves are included.

🇨🇭 A Swiss certificate can be organized for CHF 100.- extra

30/07/2026

📦📦SOLD📦📦
Work Erzrad Mesh, 3 piece wheel
✨🦄NEW OLD STOCK🦄✨
Front & rear: 8x16" ET25
Bolt pattern: 4x100
Center bore: 60.1mm
Price: CHF 2650 / EUR 2875

Imagine it's 1994 and you just purchased a set of 3-piece wheels in Japan. A beautiful mesh wheel, made by Work in Japan, that strongly resembles the legendary BBS wheels from Germany: The Work Erzrad Mesh. You wanted them on your BMW E30, but life went on, the car was replaced, and the wheels never went on the car. They stayed in their boxes, untouched, hidden away, brand new. Until one day, you finally decide to put them for sale. And here they are, 22 years after they left the Work factory.

This extremely rare set of ancient, ✨NEW OLD STOCK✨ Work Erzrad Mesh comes with production stickers from 1994. The wheels are true 3 piece design. They come with 6" inner barrels and quite big 2" outer step lips. The center is reverse mounted to the barrel. They are drilled in 4x100, which allows them to be fitted on a very wide range of cars from the 90's era.

The wheels were rebuilt with brand new polished outer lips and new Work chrome bolts. The center and center plates are all in their original color, a nice silver finish. The center caps and plates are all included, which is extremely rare for such old wheels. The hexes have some oxidization spots, or "patina" due to their age. All gel caps are in very good shape and show off the golden ERZ logo extremelly well.

Incl. 4 original Work center plates and center nut

🇨🇭 Swiss homologation certificate available

15/07/2026

🔥🔥FOR SALE🔥🔥
Work VS-SS, 2 piece wheel (rebarreled)
Front: 8,5x18" ET47 (R-Disk)
Rear: 8,5x18" ET45 (A-Disk)
Bolt pattern: 5x108
Center bore: 73.3mm (Rear) 67.1mm (Front)
Price: CHF 1950 / EUR 2125

These new Work VS-SS centers in metallic silver come from a new old stock. They were put in 8,5" wide barrels, giving them a wide range of applications, including Volvo, Jaguar and even some older Ferrari models. With R-Disk up front and A-Disk in the rear, they go over most brakes, even large sport brakes.

The barrels are brand new and come with polished outer lips. The silver sparkling centers have some storage marks and minor nicks which can hardly be noticed. They are topped off with brand new reproduction center caps made out of aluminium with a chrome coat and very high quality VS caps.

The wheels would go perfect with an older Volvo V60, V90, S60 or S90.

Incl. high quality VS reproduction aluminium center caps
Incl. 4 new valves

🇨🇭 Incl. a Swiss homologation certificate

09/07/2026

📦📦SOLD📦📦
Work VS-KF (OG)
Front: 8,5x18" ET45
Rear: 8,5x18" ET32
Lug pattern: 5x100
Center bore: 60.1mm
Price: CHF 2450 / EUR 2690

For sale is a set of OG Work VS-KF in original chrome. The wheels were rebuilt from a welded 3-piece 7,5" to a 2-piece 8,5" with new barrels. The barrels come with 3" up front and 3,5" lips in the back.

The chrome centers are in very good shape. The original wheels dated to 2005, so 21 years old. Most of the chromed sets don't age well and start bubbling: But this set shows only very few weak spots in the chrome coating.

The discontinued white and silver VS center caps have seen better days and are a little crusty, but a second set of white and silver "W" lenses is included in the selling price. Original Work valves are included in the price aswell.

Ideal for low Toyota GT86/GR86 cars and the sister model, the Subaru BRZ. Could also fit the Lexus 200h with some modifications in the rear.

🇨🇭 A Swiss certificate is included in the price.

10/06/2026

🔥🔥FOR SALE🔥🔥
Advan TC-4
Front & rear: 8,5x18" ET45
Lug pattern: 5x100
Center bore: 63.1mm
Price: CHF 1500 / EUR 1650

These flow formed, ultra light Yokohama Advan Racing TC-4 come in sparkling Black Gun Metal. With 8,5" all around, they are a perfect fit for many all wheel drive Subarus, such as the Impreza or WRX or the rear wheel drive Subaru BRZ, its sister model the Toyota GT86 and the successor, the GR86. The wheels have "GTR" concave faces, which look incredibly nice and give each car a stanced look.

3 wheels are in good condition and show a few minor nicks on the spokes as well as one single spot of curb rash on one outer rim. One wheel is brand new and never mounted on a car. An extra replacement spoke decal is included.

🇨🇭 A Swiss certificate can be organized for CHF 100.- extra

04/06/2026

📦📦SOLD📦📦
Work Amkread, 3 piece wheel
Front: 9x18" ET21 (R-Disk)
Rear: 9x18" ET21 (R-Disk)
Bolt pattern: 5x114.3
Center bore: 73.3mm
Price: CHF 1950 / EUR 2150

This VERY rare set of beautiful, reverse lipped Work Amkread, freshly arrived from Japan. The wheels share the same hardware with Work Rezax2 and come with the iconic Work RFF (Round Rim) reverse lips. The wheels are true 3 piece design in sandwich configuration. They come in R-Disk, which allows them to be mounted over large brakes, such as the Sumitomo brakes from Nissan Skylines, Silvias and Z-models.

Amkread is a Japanese tuning group, still active to this day. The wheels were mostly likely produced by Work for this specific group under a limited production run in the late 1990s. This set for sale is from 1997.

The wheels show signs of age: The outer lips are in still very very shiny condition, but show some water marks and stone chips. The bolts show some corrosion and should be replaced or polished again. The center shows some minor scratches and paint peeling around the spokes, but are in very well shape overall. All original Amkread spoke decals are present and in very good shape. The genuine center caps are all included, which is extremely rare for such old wheels. The caps are in good shape, but also show some corrosion spots.

Incl. 4 original Work Amkread Center Caps

🇨🇭 Swiss homologation certificate available

26/04/2026

📦📦SOLD📦📦
Enkei Racing S, 2 piece wheel
Front & rear: 7x16 ET32
Lug pattern: 4x100
Center bore: 70.1mm
Price: CHF 1500 / EUR 1650

This very rare set of 16", PCD 4x100 JDM Enkei Racing S comes straight from Japan. The 16" are very unusual, most sets that you can find are 15" or even smaller. Very light and perfect specs for a Civic EK4, EG6 and other Japanese youngtimers. Heck, they even look good on European cars! But for the maximum effect and JDM street credibility, someone should throw these babies on an old JDM car and turn up the Eurobeat!

These Enkei Racing S are painted in metallic gunmetal. The inner barrels have been painted in gloss black. The paint is in very good condition. The outer lips are almost perfect but have some minor marks here and there. The previous Japanese owner refinished the lips most likely. The 4 center caps are painted in gunmetal aswell.

Comes with original valves.

04/03/2026

📦📦SOLD📦📦
Work LS105, 3 piece wheel (welded)
Front: 9x19" ET50 (A-Disk)
Rear: 9x19" ET47 (O-Disk)
Bolt pattern: 5x112
Center bore: 66.5mm
Price: CHF 990 / EUR 1100 / USD 1275

In for some cheap, sparkling, panty dropping chrome wheels? Want to bring some attention to your build? These LS105 for sale certainly help! ✨

The wheels come in full chrome centers and polished outer lips. The center caps have been sourced from Japan and are in OK shape, but show some signs of age. The high offsets allow the wheels to be fitted to most modern 5x112 cars, such as the modern Golf platform and models from other brands, such as Mercedes and Audi. With spacers, these work on a very wide range of models.

Due to the A-Disk on the front, the wheels go over most regular brakes. However, they don't fit over big brake kits, such as Brembo calipers. The rear O-Disks are for maximum outer lip. Front wheels have a decent 2" outer lip, the rears have 2,5" outer lip.

Incl. 4 original LS105 chrome center caps
Incl. 4 valves

🇨🇭 Incl. a Swiss homologation certificate

04/03/2026

📦📦SOLD📦📦
BMW Styling 38, produced by Lemmerz
Front & rear: 8x17" ET20
Bolt pattern: 5x120
Center bore: 74.1mm
Price: CHF 650 / EUR 720 / USD 840

Listen up BMW E36 series owners: For sale is a set of used Styling 38 wheels, produced by Lemmerz back in 1996. These wheels were an option for the legendary BMW 5 series. However, the specs makes this set a perfect base for an E36 build.

The wheels are in used shape: Smaller scratches are present on the spokes, some light curb rash, and the wheels were repainted at one point in time. All center caps are in good shape and hold tightly onto the wheels.

14/02/2026

🔥🔥FOR SALE🔥🔥
Work Ewing 3, 3 piece wheel
Front: 8,5x18" ET25
Rear: 9,5x18" ET25
Bolt pattern: 5x100
Center bore: 67.1mm
Price: CHF 2850 / EUR 3125 / USD 3750

These rare, step lipped Work Ewing 3 from 1994 have been completely rebuilt, inside and out. The centers were repainted in matte crystal gunmetal, a glittery, very structural paint, which gives the wheel centers a very unique look. The center plates were custom CNC machined and painted in the same color, same with the hex nuts. 2 old WORK emblems were re-used and 2 brand new, old stock WORK emblems were sourced for the hex nuts.

The centers are sandwich mounted in between polished 2,5" outer lips up front and deep 3" lips in back. The inner barrel was coated in black. The wheel is held together with brand new polished Work bolts and new serrated nuts.

The wheels were designed to fit multiple cars, e.g. Toyota GT86 & Subaru BRZ and other Subaru Models, as well as VAG models such as the VW Golf 4, VW Polo, VW Bora, VW Beetle, VW Passat, and it's related Audi models such as the S3, as well as the Audi TT. The wheels don't fit over big brake kits (such as the Brembo brakes of the STI), as they are standard A-Disks.

Incl. 4 original WORK hex nuts & custom center plates
Incl. 4 original WORK valve caps

🇨🇭 wheel homologation certificate available

felgenfetisch

08/10/2026

30/07/2026

15/07/2026

09/07/2026

10/06/2026

04/06/2026

26/04/2026

04/03/2026

04/03/2026

14/02/2026

Adresse

Website

Benachrichtigungen

Verknüpfungen

Teilen

Kategorie

Antrag auf Entfernung des Eintrags