Auto Repair Diagnostic Center

Auto Repair Diagnostic Center Engine Computer (DME, ECM, PCM, ECU) Cloning,Car Key Cut & Programming

some of the tools we use on a daily basis
01/18/2026

some of the tools we use on a daily basis

2018 Subaru WRX Airbag module crash clearClearing crash data on 2018 Subaru WRX using RENELIGHT device
10/01/2025

2018 Subaru WRX Airbag module crash clear

Clearing crash data on 2018 Subaru WRX using RENELIGHT device

BMW F series ECM cloning
12/08/2024

BMW F series ECM cloning

When you buy a used GM radio (2011 or newer) it will usually show that the radio is locked. We can VIN unlock your radio...
11/06/2023

When you buy a used GM radio (2011 or newer) it will usually show that the radio is locked. We can VIN unlock your radio so that you can install and use it in your vehicle.
We can do this service for you at a fraction of the cost that a dealer will charge you.

If you are experiencing intermittent or complete no start issues we can disable the immobiliser system without the need ...
10/09/2023

If you are experiencing intermittent or complete no start issues we can disable the immobiliser system without the need to do any other modifications to the vehicle. If your ECM is dead and you are planning to install a used ECM and you want to avoid programming hassle, this service is also for you.
Covers most Kia Hyunday modules .
Delphi MT38,MT86. SIM2K-24X,25X,SIM2K-141 142 341,BOSCH MEDG17.9.8 ETC.

This kia had a software update due to errors P0420 and P0171.
12/16/2021

This kia had a software update due to errors P0420 and P0171.

This customer removed the trailer hitch module from his Audi.After removing the module he had errors in a few other modu...
12/02/2021

This customer removed the trailer hitch module from his Audi.
After removing the module he had errors in a few other modules saying there is no communication with the trailer module.
We uncoded the option for the trailer module from his car to solve the error messages.

We have ability to clone ECM's on most of todays cars
12/02/2021

We have ability to clone ECM's on most of todays cars

This car had the air spring replaced in another shop. Afterwards it was leaning to one side because of a lack of calibra...
11/14/2021

This car had the air spring replaced in another shop. Afterwards it was leaning to one side because of a lack of calibration. We perfomed a suspension level calibration to fix the leaning issue.

A car came to the shop to get brand new transmission module programed , Process went successfully.
09/09/2021

A car came to the shop to get brand new transmission module programed ,
Process went successfully.

On this car the air suspension was converted to Strutmasters suspension conversion kit.after that on the instrument clus...
09/09/2021

On this car the air suspension was converted to Strutmasters suspension conversion kit.
after that on the instrument cluster there was a warning saying ABC system malfunction.
to get read of this massage ICM was recoded than there was no warning informing
about the malfunction in the ABC system.

Programming MB key on bench an all key lost situation.To do that we need only EIS module from the car, the car does not ...
08/16/2021

Programming MB key on bench an all key lost situation.
To do that we need only EIS module from the car, the car does not need to be towed to the shop.

Address

263 Barton Street Unit 9
Stoney Creek, ON
L8E2K4

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+12897992828

Alerts

Be the first to know and let us send you an email when Auto Repair Diagnostic Center posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Auto Repair Diagnostic Center:

Share