Comments
A Giant Shoutout to Bullet Proof Bumpers for an excellent project.
We were looking for a solution for one of our Rescue Units, and due to COVID there was significant lead times with other manufacturers.
When we reached out to James, we had an idea of what we wanted but didn't fully grasp the capabilities of BulletProof.
They were more than accommodating on getting us EXACTLY what we wanted, from integrating our Emergency Lights, Off Road Bars and custom brackets for our equipment.
I have seen many bumpers, and without a doubt these are by far the cleanest, and purpose Built I have ever seen.
They installed wire channels so that we didn't have wires hanging. With anything custom that has a difficult client (us) that changes their mind over and over, there maybe small hiccups but again... they just killed it and accommodated/fixed whatever we disliked.
A+ on design and quality... and not a high enough rating is available on the custom service.
Bumper features:
Rigid Industries 20" Bar
Rigid Industries Q Series
Rigid SAE Approved Fog Lights
Warn VR 12k pound winch
Whelen Emergency Lights
🚨Another majestic 450 outfitted with some proper shoes!💪🏼
👉🏼22" American Force Psycho wrapped in 37" Toyo M/Ts
👉🏼2.5" ReadyLIFT leveling kit with extended BulletProof mud flaps
•
American Force Wheels | Wheel Pros Canada | Toyo Tires | Bulletproof Bumpers |
💪🏼 Check out this 450 Platty on forged wheels! Metallic bronze powder coated Fuel Forged wheels wrapped in 35" Maxxis RAZR AT tires 🤩
🛡 The BulletProof Kickback mud flaps keep rocks and debris under control and look super wide from the rear! 👌🏼
•
Fuel Off-Road | Wheel Pros Canada | Maxxis Tires | Bulletproof Bumpers |
👀Check out 's super majestic looking '21 F-150 rocking a 4" BDS lift, BulletProof Kickback Mud Flaps, and rolling on 20" XD864's wrapped in Nitto Ridge Grapplers🔥
•
XDwheels | Nitto Tire USA | BDS Suspension | Bulletproof Bumpers | Wheel Pros Canada |
***Feature Vehicles Recently Added***
Check out the full album by clicking ☝Signature Pieces👆 above.
In this addition to the album we have some sick stuff from BDS Suspension, Toyo Tires Canada, Morimoto Lighting, Evolution Motorsports, BODYGUARD TRUCK ACCESSORIES, RECON Truck Accessories, Fuel Off-Road, Bulletproof Bumpers, Pro Comp, Wright Restyling, Katzkin Leather, Cochrane Toyota, Highertechlifts, Five Star Auto Accessories, Wheel Pros Canada, Speed Demon LED Lights, Toyota Canada, GMC and much more
Check out some of our favorite projects we have done. Our One & Only Body-Liner, Custom designs/badges/kickbacks/grills, Lifts, Rims, Tires & much more! We take great pride in what we do, worked with some great clients, made some unique pieces of automotive art & new friends! See pictures for Video links & more details.
Message us for a quote.
*** Wheelhouse Yukon *** 🔉🔊Story Time 🔊🔉 Alpine Irrigation came in wanting a blacked out Yukon, us to put our spin on it & make it Unique. (Catch it in Season 3 of ABTV) We wanted height, stance, bigger tires, different lighting & a sleek bumper with big lighting options. BODYGUARD TRUCK ACCESSORIES makes some SICK bumpers, but they do not make one to fit this Yukon. We fabbed up some custom brackets, trimmed up the factory 1 piece front bumper/grill & had the look we wanted! For the headlights we called up Evolution Motorsports and Morimoto Lighting opened up the lights to color match the inside & got some sick projectors with switchback halo's. Some Cadillac tail lights to change up the rear. We wanted to fit 35's so we cut back the fenders to gain 3" clearance & called the guys at Toyo Tires Canada for some of the new Toyo AT3's. Asked Fuel Off-Road & Wheel Pros Canada what's new with a bit of a dish & has a little splash of machining, the Runner was a obvious choice! Some Five Star Auto Accessories Long John Kickbacks instead of fender flares. Bulletproof Bumpers full length running boards (our favorite boards). A 6" ProComp Suspension lift for the height we needed. Speed Demon LED Lights hooked us up with some SICK new style LED bars & POD's for the front end. Topped it of with fully coating the beast in our high gloss color matched textured body-liner. Big thank you to the Wheelhouse Garage for the location! See photos for more, message us to design your ride today
The Bulletproof Bumpers running boards are TOUGH! Made of at 12 gauge steel, they are ready for whatever you throw at them!
When its up high you want to be able to get in! That's where Bulletproof Bumpers full length running boards come in! Bulletproof had not yet put a set on this year, make & model so they fabbed us up some for this job and now offer these options to the public! Love working with local companies like them that go above and beyond what is expected.
This was a fun project! From trying to get the BODYGUARD TRUCK ACCESSORIES front bumper to fit (Made for a 2011 Chev Silverado 3500), to trimming over a 3" wide piece of pie out of the fenders to make the 35's fit with no rub. This beauty had its challenges ! The guys at Bulletproof Bumpers took her in and made the first set of brackets for this make & model to mount the full length running boards too. The factory windshield washer fluid container is visible with this bumper so we cut it down, fused it together and tucked it in. A few little heres and theres that needed some love to tie it all in.
We knew what we wanted in our head but had to make it a reality is always the fun part! But the final result is EXACTLY what we wanted.
🚨🚨 CHECK THIS OUT 🚨🚨
2021 GMC Denali build!
•Procomp 5.5" lift
•20x12 Fuel Maverick wheels
•37x12.50R20 Nitto Ridge Grapplers
•13" Bulletproof kickback mudflaps
•Airlift 5000 airbags
Simple yet, GORGEOUS
Nitto Tire USA Bulletproof Bumpers Procomp
Love our trucks with Bullet Proof Bumpers and Speed Demon lights. Support Alberta
High gloss color matched smooth body-liner on the Grill, Bumpers, Flares & Under the flares. Topped off with a set of Five Star Auto Accessories kickbacks, Bulletproof Bumpers Boards, Bushwacker flares, Fuel Off-Road wheels & Nitto Tire USA skinz