DCCDPro.com

04/22/2026

Vssplus is needed for a transmission swap when ...
1-Your swapped transmission does not have Vehicle Speed Sensor and your gauge stops showing the speed. 2- Your existing transmission sensor replacement is practically not possible or too costly.

VssPlus – ABS to VSS Replicator (Reluctance Type) Posted on January 12, 2025 by admin Sale!$179.00 – $229.00Price range: $179.00 through $229.00Swapped Transmission or Broken Speed Sensor? Lost Gauge Speed or RPM Limited by ECU?Quick and Easy to install solution is our VssPlus (on Sale $179 USD,...

04/21/2026

Modern G-Sensor vs Older OEM
We do not piggy-back on existing old OEM G-Sensor for Spiider Motorsports DCCD Control (although easier and cheaper for us) due to:

--Newer technology sensors have higher sensitivity and larger range and we can always use newer versions in each new build
--Advanced new technology has less noise and is more accurate
--We do not know the state of your older OEM sensor so can't guarantee optimum operation nor can any aftermarket system using them and did we mention they are on CANBUS and slow!

Our goal is to provide a solution that is easy to install and calibrate and not cut corners in Spiider DCCD Controller to bring you performance on every turn!

DCCDPRO – Performance Every Turn!CELEBRATING 15 YEARs of enabling Subaru MotosportsSwapped in a 6 Speed STi Transmission and Need a reliable, Race Tested, DCCD Controller? Spiider Technology is Your BEST Solution! Spiider DCCD Controller - Easy to Install, Race Performance, True Hands-Free Operati...

04/21/2026

Secondary CANBUS is Slow for Motorsports DCCD!!!
Secondary CANBUS systems used by OEM DCCD Controller (or similar substitutes) are slower than primary CAN buses in both Subaru WRX STi and most modern vehicles. Primary buses (usually 500 kbps to 1 Mbps) handle safety-critical data like engine and ABS, while secondary or "comfort" buses (125 kbps, introduced in the 90's) handle less critical, slower-paced tasks. This puts any CANBUS based DCCD Controller in huge disadvantage to Spiider DCCD Controller that directly reads conditions and responds to control of DCCD electro-mechanical system. It's just simple math and physics an we have 15 years of recorded success on podiums to prove it😁.

DCCDPRO – Performance Every Turn!CELEBRATING 15 YEARs of enabling Subaru MotosportsSwapped in a 6 Speed STi Transmission and Need a reliable, Race Tested, DCCD Controller? Spiider Technology is Your BEST Solution! Spiider DCCD Controller - Easy to Install, Race Performance, True Hands-Free Operati...

03/26/2026

Congrats to Yohan Tessier/Olivier Martel and Test Racing Team!
Great 2nd and 3rd podium finish at 2026 Perce-Neige Rally!

11/08/2025

Congrats to Rufus Connell in 2025 Fresno SCCA Autocross Series🥳
3rd in class on Saturday
1st in class Sunday (Enduro).
Quote: "It was an Enduro and I was 2nd car out so we swept the course."

07/29/2025

Unique Support for SI-Drive Style Controls!
Our Spiider Family of DCCD Controllers supports the MY08+ Subaru Controls that have the controls ( aka Multi-select Switch with SI-Drive Control). We have engineered it for you so if you swap in a new 6 speed DCCD equipped transmission and want to use this style of control with Spiider (DCCD) Controller we can provide you with this option. Remember to pick Si-Drive Control option "with plug Connector" for an easy plug and play.

01/11/2025

STi Cluster LED Display Holder makes installation of this add-on option such a breeze!

01/11/2025

G Sensor Holder Makes Installation of Spiider DCCD Controller So Much Easier! and included Free with purchase of the Controller!

01/08/2025

We are excited to announce our flagship Spiider Plus DCCD Controller will also support HAL Type Vehicle Speed Sensor (VSS) input option. This unique and unmatched feature allows newer generation HAL sensors to be used which are readily available. Just set you HAL preference from the drop down menu before add to cart on product page:
https://www.dccdpro.com/product/dccd-spiider-plus/
Note: iWire is No Longer our Authorized Distributor

08/20/2024

Unique support of SI-Drive Style Controls!
Our Spiider and Spiider Plus DCCD Controllers support SI-Drive style controls. This is a unique feature/option we have engineered. Please click on the option "Si-Drive Control Ready" when ordering. Also many P&P plugs available under https://www.dccdpro.com/pp-connectors/

09/11/2023

Another great video from guys at Baxley with Spiider DCCD Controller and VssPlus as part of the transmission performance upgrades:
https://fb.watch/m-7gLuhsgu/