2026-11-01
Well I guess it’s been a minute since I made a post on here, but I’ve been busy and often forget to take pictures of all the vehicles I have the pleasure of working on!
Today’s project was a 2021 Silverado 1500 with the 6.2L engine. This one had an odd “popping” sound that sounded like it was coming from the back of the engine. When I watched the live data, the fuel rail pressure was all over the place and the commanded / actual were not even close to each other. The high pressure pumps are a common weak point on these engines and it explained the odd fuel rail pressure readings anyway. The popping noise is actually high pressure fuel leaking into the low side, causing a spike on the low side and the line to jump, hitting the firewall.
In order to replace the fuel pump you have to remove the intake manifold! The fuel lines are also a one time use line that “forms” once you tighten it. So a few new lines and a new pump later and this truck is once again running smooth with no more odd popping noise! As you can see now the commanded fuel rail pressure and the actual are nearly identical.
Thanks again for your continued support, always appreciated!