Secret City SpeedFactory

Secret City SpeedFactory Secret City SpeedFactory is a grass roots company based in the Fraser Valley, we work on anything from street cars to drift missiles. Enjoy everyone

before and after of the relays and power system in our friends drag car. Out with the old sketchy wiring and in with a n...
08/18/2021

before and after of the relays and power system in our friends drag car. Out with the old sketchy wiring and in with a new reliable systems.

Big difference between the before and after on the Harley Davidson. Rewired everything from handle bar controls right ba...
07/04/2021

Big difference between the before and after on the Harley Davidson. Rewired everything from handle bar controls right back to the tail light. No more hard starts or lights not working. Everything works like it should.

Helping out rewiring a 90’s Harley Davidson. The wiring was definitely in need of a full redo, pulled out all the old wi...
06/04/2021

Helping out rewiring a 90’s Harley Davidson. The wiring was definitely in need of a full redo, pulled out all the old wiring and replacing every single wire. While we’re at it! swapping over all the old connections to Deutsch DT connector. Stay tuned for the final results

Nothing like some good old port matching a Holley carb intake manifold for a 13B T2 block. Time consuming but so satisfy...
05/01/2021

Nothing like some good old port matching a Holley carb intake manifold for a 13B T2 block. Time consuming but so satisfying in the end. Stay tuned for more on this project

Some more quick fab work done for our street/track 10AE FC3s. This bracket was made to allow us mount a factory RX8 DBW ...
01/14/2021

Some more quick fab work done for our street/track 10AE FC3s. This bracket was made to allow us mount a factory RX8 DBW peddle into an FC RX7. This will allow us to run a DBW throttle body to have more advanced engine protection strategies in the tune and the ability to run cruise control with the haltech elite 1500.

01/03/2021

Another RX7 is up and running. Unbelievable how good this motor sounds. This FD sporting a freshly rebuilt 13B-REW with a big Bridgeport done in house and powered by a haltech elite 1500, Sorry to anyone using headphones. She’s running open downpipe.

Nothing like 4 new ignition coil packs and a new bracket for an RX8, with how much abuse RX8’s put their ignition coils ...
10/26/2020

Nothing like 4 new ignition coil packs and a new bracket for an RX8, with how much abuse RX8’s put their ignition coils through. It’s always a good idea to change them every few years.

Big shout out to the guys at Haltech!!! Specifically Anthony at the Haltech USA West branch!!! He Hooked us up with the ...
08/05/2020

Big shout out to the guys at Haltech!!! Specifically Anthony at the Haltech USA West branch!!! He Hooked us up with the last new IQ3 Street Dash for the shop’s rx7 build! On top of that included 4 stickers and a T-Shirt! The great service is why you guys are #1 in our books! No better company to deal with for all your standalone ECU needs. Their ECU’s are our first choices every time! Only the best for our shop cars and for our customers cars!!

After the microtech LT-10 install and tune, our customers sponsored drift car is running great. Shreds tires like no tom...
07/12/2020

After the microtech LT-10 install and tune, our customers sponsored drift car is running great. Shreds tires like no tomorrow and been nothing but reliable!

Well the engine side of the haltech elite 1500 install has been completed! The harness is all nicely routed, loomed and ...
07/01/2020

Well the engine side of the haltech elite 1500 install has been completed! The harness is all nicely routed, loomed and labeled! This bridge port REW will run better then ever with the added features the haltech elite has to offer over the old microtech ecu. Also provisions for add extra sensor and features have been thought of via some DTM connectors with the unused I/O’s. Simply use the corresponding DTM connector to plug in, make a expansion harness and you’re ready to add anything you want later!

Always project happening in the factory 😉 wiring in a new haltech elite 1500 onto this bridge port single turbo FD rx7
06/04/2020

Always project happening in the factory 😉 wiring in a new haltech elite 1500 onto this bridge port single turbo FD rx7

Fabrication continues in the shop today. Building a custom vacuum rail for another project we are working on. Stay poste...
05/17/2020

Fabrication continues in the shop today. Building a custom vacuum rail for another project we are working on. Stay posted for the finished product!

Address

Mission, BC

Website

Alerts

Be the first to know and let us send you an email when Secret City SpeedFactory posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category