Grey Wolf Industries

Grey Wolf Industries We specialize in aluminum fab, new aluminum boats and upgrades like uhmw, modifications and repairs.

FOR SALE!!!Custom-built river jet boat, built in 2025. Scott Scud hull — a proven New Zealand jet boat design known for ...
09/24/2026

FOR SALE!!!

Custom-built river jet boat, built in 2025. Scott Scud hull — a proven New Zealand jet boat design known for exceptional handling. Very fast and nimble 14 degree hull, with a UHMW keel strip for abrasion resistance. Four lifting strakes on the bottom mean it hooks up hard and corners extremely well — very little slide through turns. Stays on step at slow speeds for sneaking around back channels

Price: $110 000

Custom-built Toyota 1ZZ-FE, turbocharged, ~300 hp at ~15 psi boost. Paired with a Southern Jet 178 (SJ178) two-stage pump, high-quality SSS components, hydraulic reverse and hydraulic tilt. Dry weight approximately 1,500 lbs.

Controls & Instrumentation - Sprint boat-style steering system, foot throttle, electric trim and reverse at your fingertips. Haltech gauge displays everything — trim position, fuel level, and full engine data at a glance.

Fixed high-flow intake grate. A stomp grate can be added if the buyer wants one.

160L fuel tank for long-range trips.

Custom aluminum trailer, built to match the hull's deadrise, with bumper posts for easy loading — even in fast, shallow rivers. Extremely well built and light, and tows beautifully — a world apart from the trailers that typically come with mini jet boats.

Bow cover, bimini top, and camper back for weather protection. Engine heater takes the chill off on cool days. Has a HIN, so it can be insured, registered and financed.

40 hours.

Another simple yet functional Backchannel XL finished up with a Yamaha sho power plant and pump.
09/18/2026

Another simple yet functional Backchannel XL finished up with a Yamaha sho power plant and pump.

The Kraken! A 13’ long boat with a 5.5’ wide boat built for the shallows! This boat has a 8deg bottom with 1/2” keel and...
09/18/2026

The Kraken! A 13’ long boat with a 5.5’ wide boat built for the shallows! This boat has a 8deg bottom with 1/2” keel and 1/4” wings and bow, along with a fully extruded 6061 string bottom structure making it one of the toughest boats around. For the power plant we used a 2.3 Indmar eco boost hooked to a Scott 812 which made this boat hook up really good along with making it extremely capable in the shallows and not having to worry about pumping some rocks.

09/05/2026

Firefish convict hamilton 214- Scott 852x swap complete!

Nice work Matt on the diy Backchannel kit! We have a few more kits in stock if you want one right away.
08/27/2026

Nice work Matt on the diy Backchannel kit! We have a few more kits in stock if you want one right away.

All the complete boats we build are pre sold and build to customers spec. We have no problem sharing what our boats cost...
08/12/2026

All the complete boats we build are pre sold and build to customers spec. We have no problem sharing what our boats cost but even if you ordered the exact one today it would almost always be more due to the rapid changes and increases we see in the price of materials, parts and sometime tariffs.

Here is a a nice 16’ Alpha we finished a while back. Powered by a 6.2 Kodiak hooked to a 852X makes it a fun powerful boat to drive! The pump provides no slip on the launch and excellent hook up in a hard corners. Also with a slow planning speed of 25mph and a top speed of over 50mph in a wide 8 degree boat makes it a great setup for slow cruising or if you need to get somewhere in a hurry. This unit also had an air actuated stomp grate and full electric reverse that functioned in 2 seconds from top to bottom making it a pleasure to drive and giving you lots of control when trying to maneuver the boat. We have another one of these all welded up ready for you to take home and start your winter project or to book in a build this winter with us.

The Grey Wolf Industries SCOUT! This 16’ long outboard jet boat has an oversized tunnel to keep the jet foot out of harm...
07/21/2026

The Grey Wolf Industries SCOUT! This 16’ long outboard jet boat has an oversized tunnel to keep the jet foot out of harms way, along with a 1/2” keel, 1/4” wings and bow, 1/2” uhmw 2’ wide, and 5 1/4” thick extruded stringers! This is one of the toughest little outboard jets around and with the 8 degree bottom it runs shallow. It weighs in at 1650Lbs including all hardware and motor making it heavier than others, but because of its strength there will be no reason to cut your fishing trip short due to touching one boulder. This one also sports a garmin kraken on the bow, plus a live well and storage box in the rear. This boat is already sold but we still have slots open for winter builds if you want one of your own!

Another 14’ backchannel XL hitting the water this year, this one is powered by a 240 sport jet making it a powerful litt...
06/06/2026

Another 14’ backchannel XL hitting the water this year, this one is powered by a 240 sport jet making it a powerful little workhorse. The customer wanted a simple functional boat without all the fancy stuff to help keep cost down yet still have a strong boat they can run in the shallows with and not worry.

05/21/2026

This should give you the itch to get the boat out on the water! This is a 13’ atom we built a few years ago

7.5’ sleigh holds a full Muskox with more room for gear still! Thanks for the picture Ethan
04/29/2026

7.5’ sleigh holds a full Muskox with more room for gear still! Thanks for the picture Ethan

Address

Millet, AB
T0C1Z0

Website

Alerts

Be the first to know and let us send you an email when Grey Wolf Industries posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category