B-Tech Diesel

03/21/2025

Make sure to wish this lovely momma a happy birthday today!
Thank you for all that you do for us, for being the best mom to our girls, and the best wife to me!
Happy 28th birthday !

09/03/2024

Now that the dust has settled from the weekend, I thought it would be suitable to give everyone an update!
In heat race 1, we started 2nd and after a hard fought race, ended up dropping a position and finished 3rd only behind the leader by 0.61 seconds. 2nd Heat race we started 3rd and finished 3rd, behind the leader by only 0.57 seconds. In the Final Feature race, we started 8th out of 11 and worked our way up to 4th and managed to stay there finishing only 0.18 seconds back from a podium position! All 3 races were nail biters! This was by far one of the funnest days of racing I have had and that was due in a big part to B-Tech Diesel getting some work in on the car last week! It is running better than it has in a long while!! Check out Claude’s Garage on Youtube in the coming week to see the races yourself!

08/16/2024

We are a couple days away from hitting the track! So its time to introduce Clarkson Motorsports newest sponsor! B-Tech Diesel in Hardisty, AB! Braden jumped on board as a mechanical sponsor and has put in some tune up work in the last couple days, making sure the car is ready for the track this weekend! Thanks so much for your support, B-Tech!

09/19/2023

6.7 Powerstroke had to be towed to our shop for diagnosing the fuel system! We found the switch on the fly wiring and switch were not installed correctly. We then changed the switch on the fly to a Charge Air Cooler setup to prevent this from happening again. We also added a S&S Diesel Motorsport CP4 saver and a FASS Fuel Systems 165GPH lift pump to get this truck back to work!

We also got this truck dialled in with EZ LYNK and tunes from Coopers Custom Solutions. The Non-VGT BD Diesel Scorpion Turbo kit was a lot of fun to play around with!

We apologize for a lack of social media involvement for the last few months, work life and personal life has been very busy!

08/07/2023

B-Tech Diesel will remain closed until August 14th

01/22/2023

Two L5P Duramax trucks came in over the holidays for some upgrades and repairs!

Kryptonite Products stage 3 level with fox shocks and upper control arms
Dirty Diesel Customs Egr fix kit with 3.5” downpipe and Canbus kits
Flo~Pro Performance Exhaust 4” and 5” exhaust kits with mufflers
HP Tuners unlocked ecm
Edge Products Evo HT2 unlock tool and Insight CTS3 monitor
Coopers Custom Solutions custom tuning packages

We also replaced the front transmission lines with some retrofitted hoses for longer life!

12/03/2022

2006 JCB 190 Robot

We had to do a service call to diagnose a no-fuel issue with this unit.

It was then hauled to our shop for us to replace the fuel lift pump and also diagnose some electrical faults. We found a large amount of dust and corrosion on almost all of the electrical components in the cab causing some intermittent problems!

11/22/2022

Check out this transformation!

2020 6.7 Cummins Ram just got a huge list of upgrades done!

BDS Suspension 4” 4 Link Suspension Lift Kit with FOX shocks and 37/13.50R22 Nitto Trail Grapplers with 22x10 Fuel Off-Road Runners sent here from Gerts Wheels

S&B Filters cold air intake set up with a Banks Power Monster Ram intake horn kit with the intake air heater fix and new intake manifold plate!

S&S Diesel Motorsport CP3 Conversion Kit with a super sport CP3 pump, fuelled by a FASS Fuel Systems 165GPH lift pump with Cat filters and a Fleece Performance Engineering factory fuel filter delete!

Flo~Pro Performance Exhaust 5” flex pipe back exhaust system with an MBRP Hex tip!

B-Tech Diesel EGR Fix kit, custom 13.5” Kick backs from Trigger Industries, as well as our Ram fuel fill fix kit plugs!

Custom EFILive tunes from on a Cummins switch on the fly and an Edge Products CTS3 Monitor!

Kryptonite Products front upper and lower ball joints and a Dirty Diesel Customs CCV delete!

It was an absolute pleasure to work on this truck and we are stoked at how happy the customer is to have it back!

11/04/2022

Check out this big beast!
We gave this 2014 Cummins a solid inspection and found some flaws, but we got it fixed up for the new owner!

Kryptonite Products upper and lower ball joints
B-Tech Diesel Egr fix kit
BDS Suspension shocks all the way around
Flo~Pro Performance Exhaust 4-7” stainless exhaust tip
custom switch on the fly tune file with transmission tuning
Performance LED Lighting Ltd. low beam headlights and cargo lights
We also replaced a faulty wheel speed sensor and had to weld on a broken shock bracket!

10/21/2022