Bronson Muffler and Alignment

Bronson Muffler and Alignment Your Exhaust and Alignment Specialist
Offering a full range of mechanical service and repair with reasonable rates and quality work.

04/07/2026

We are looking for a Service Technician to join us! Please send your resumes to [email protected], drop by the shop or send us a message here.

We are ideally looking for
Red Seal Automotive Service Technician
Experience with exhaust fabrication, welding and wheel alignments
Valid Drivers License

We will be considering all applicants with an Apprentice Service Technician or better.

Pay is hourly, based on experience and qualifications.

8 years with this guy and it seems he only started yesterday.  Forrest is moving on to hopefully bigger and better thing...
04/01/2026

8 years with this guy and it seems he only started yesterday. Forrest is moving on to hopefully bigger and better things in Alberta. I wish him all the success in the world. He will definitely be missed.

03/14/2026

Audi S4 had a very ugly hacked up and low hanging exhaust. We got it straightened outand sealed up with a mode durable system..didnt have time to get a sound sample but it left a very much deeper tone. Will be back for tips so will get a recording then

03/10/2026

K5 Blazer with small block and headers. Our solution to a bulletproof connection is to replace the typically leaky 3 bolt header fl**ge with a solid v band fl**ge. More great work from Forrest. Going to miss him.

2016 Hyundai Accent Catalyst.  Destroyed by carbon buildup and a failed injector.  I know people will go redneck and say...
03/10/2026

2016 Hyundai Accent Catalyst. Destroyed by carbon buildup and a failed injector. I know people will go redneck and say to core the cat. A. illegal B.its a symptom of bigger issues. Just fix it correctly

2016 Hyundai Accent. Has multiple issues. Clogged valves A plugged cat and Injector failure.  We have walnut blasted the...
03/10/2026

2016 Hyundai Accent. Has multiple issues. Clogged valves A plugged cat and Injector failure. We have walnut blasted the valves and reeplaced the cat and sent the injectors for cleaning.

Another load of Canadian made high quality mufflers waiting to be fit on your car or truck.
03/04/2026

Another load of Canadian made high quality mufflers waiting to be fit on your car or truck.

Subaru manifold pipes are repairable with respect to the flex/expansion joints. We do it fairly often. In this instance ...
02/27/2026

Subaru manifold pipes are repairable with respect to the flex/expansion joints. We do it fairly often. In this instance we had to inform the customer it was wasted money due to the core breaking down in the Catalyst . We wont waste a customers money if we can help it.

Broken studs on iron head LS engines are a bit of a gut check. Welded out these ones after a few attempts. We're here to...
02/25/2026

Broken studs on iron head LS engines are a bit of a gut check. Welded out these ones after a few attempts. We're here to help get those manifolds sealed up.

02/25/2026

Due to circumstances beyond our control we sometimes have to shift routines in how we do things. Thanks to a certain orange megalomaniac down south we have refocussed tofind a good Canadian made product and we have found them. Our new line is way sturdier and likely longer lasting than the Americanese units we have complacently used up to now. My bad... but am actually grateful for the refocus and opportunity to make sure our country works better.

02/23/2026

Dodge Ram Daytona in excellent shape. Except for the exhaust. Tailpipes had unfortunately caught on something and kinked the tailpipes. Muffler was a performance muffler but had very small outlets and the tailpipes were narrow.
We built a new exhaust from mid pipe back using a Magnaflow 12288 muffler and custom bent tubing done here. Both pipes were done together bend by bend to ensure a parallel configuration. All in all a good result

Address

2955 Boys Road
Duncan, BC
V9L6W4

Opening Hours

Monday 8:30am - 5pm
Tuesday 8:30am - 5pm
Wednesday 8:30am - 5pm
Thursday 8:30am - 5pm
Friday 8:30am - 5pm

Alerts

Be the first to know and let us send you an email when Bronson Muffler and Alignment posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Bronson Muffler and Alignment:

Share