Rutt's Garage Inc.

Rutt's Garage Inc. Rutt's Garage Inc. Is a small independent automotive diesel repair shop located in the Easyford area. An AMVIC licensed business.
(1)

-General Repairs
-Suspension/Steering
-Diesel Repairs and Performance
-Differential Repairs
-Electrical Repairs
-Insurance Inspection
-Select Transmission Repairs
-A/C Repairs

We have here the hardest working employee. She shows up when she's needed and makes the shop a joy full place. Just look...
08/14/2026

We have here the hardest working employee. She shows up when she's needed and makes the shop a joy full place. Just look at that smile ready to greet you!

Our newly acquired mechanic Brody is starting of on this big job doing a clutch, lots of front end components and a hydr...
08/14/2026

Our newly acquired mechanic Brody is starting of on this big job doing a clutch, lots of front end components and a hydro boost for this wonderful customer of ours.

Today in our machine shop we have Jeremy measuring the cylinder bores to see if this block can be used for a rebuild. We...
08/14/2026

Today in our machine shop we have Jeremy measuring the cylinder bores to see if this block can be used for a rebuild. We also have Tom sizing the valve guides on a different cylinder head.

Over this past week we had Trevor doing a head gasket job with ARP head studs as well as a full delete on this lovely bl...
08/14/2026

Over this past week we had Trevor doing a head gasket job with ARP head studs as well as a full delete on this lovely blue truck.

07/28/2026

If any of our customers know of a good mechanic or 3rd-4th year aprentice, let us know! We are looking to hire another person still to join our team. Just reaching out to our customers for help!
Thank you.
We are trying to keep up with the work load and its getting harder to keep up with needing 1 more person still.
If you know of anyone, tell them to come talk to Jeremy!

Gotta post some pictures sometimes. Been busy as usual!Trevor doing another cab off engine replacement, Ian is doing a t...
07/09/2026

Gotta post some pictures sometimes. Been busy as usual!
Trevor doing another cab off engine replacement, Ian is doing a turbo replacement, Adam is replacing an engine replacement, Brett is doing front end work and Tom is assembling
An 6.7L cummins in the engine rebuilding area!

We had a customer come in suspecting they had dropped a valve in this truck. We looked in the suspected cylinder with th...
06/18/2026

We had a customer come in suspecting they had dropped a valve in this truck. We looked in the suspected cylinder with the borescope and found the piston very beat up and were concerned about the cylinder walls being damaged as well. Our tec removed the engine a tore it down and found that this engine block could still be used but the head had taken to much damage and needed to be replaced.

This past week we had Ian doing a cam phaser and timing job for a customer. With the ford trucks it is important to be s...
06/08/2026

This past week we had Ian doing a cam phaser and timing job for a customer. With the ford trucks it is important to be strict on getting our oil changed every 8000km. If you go over the recommended service interval your oil can become contaminated and sludgy witch can clog the VGT solenoids and the microscopic oil passages. This severely limits the volume and pressure of the oil reaching the phaser causing premature wear. When the engine is turned off, oil drains away from the phasers. On startup, if the internal locking/keeper pin is worn, the phaser cannot lock into a default position. This causes the internal components to violently slap together, creating a distinct "diesel-like" rattle until oil pressure rebuilds.

Next engine job on the go, lots to measure!
06/04/2026

Next engine job on the go, lots to measure!

We had this truck come in to see us due to engine noise. We found lifter issues and some of the valve seats had dropped ...
05/29/2026

We had this truck come in to see us due to engine noise. We found lifter issues and some of the valve seats had dropped out of the engine head.
In the end we were able to have Jeremy do a rebuild on the head and Trevor performed the rest of the engine repair!
Since 2019 the dodge ram pick ups with a Cummins engine, came with hydraulic lifters from factory. Now that no manufactures seem to be able to build a hydraulic lifter in todays world, we are having a lot of issues with these. For these particular trucks we can get solid tappets kits from Hamilton Cams to convert it to how these engines were historically built with out issues.

Address

50011 Range Road 85
Drayton Valley, AB
T7A2A3

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Telephone

+17808982341

Website

Alerts

Be the first to know and let us send you an email when Rutt's Garage Inc. posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category