Greasy D's Rod & Kustom

Greasy D's Rod & Kustom The work that we do, projects and progress pictures

Busy week on Larry's GMC. First couple days, epoxy, seam seal and bedliner inside and underneath. While that was cur...
08/29/2026

Busy week on Larry's GMC. First couple days, epoxy, seam seal and bedliner inside and underneath. While that was curing, made some headway on the 75 GMC cab. Filled in the dash cut out, filled the holes that once had cab lights and removed the floor. Back on Larry's, masked off, sealed, based and cleared the dash and interior! Enjoy the long weekend!

Larrys bed, completely painted and polished. Final primer on the hood panel. Last piece of the puzzle.. a load of black...
08/22/2026

Larrys bed, completely painted and polished. Final primer on the hood panel. Last piece of the puzzle.. a load of black painted for it as well. Shads Firebird came off the rotisserie on Thursday, and Friday Larry's cab was on, ready to get the undersides bedlined. Firebird is also a roller this afternoon. Cheers!

Scott was seeing green this week Back half of the truck is now painted. Polish next week. Cab corners and gapping done ...
08/15/2026

Scott was seeing green this week
Back half of the truck is now painted. Polish next week. Cab corners and gapping done on the crew cab, started some bodywork. Firewall painted on the Firebird and touched up the subframe. Should be on its suspension next week. We also picked up the frame for the 75 C10 from our friends at Flagstaff Collision

Booom! Saturday, worth the wait! Scott made some parts green for Larry's GMC, what a colour! Not to be out done, he ...
08/08/2026

Booom! Saturday, worth the wait! Scott made some parts green for Larry's GMC, what a colour! Not to be out done, he also also painted a load of black for Larry as well. Hood in final prime as well. Should we bedline the front fenders thus week as well? Ya, eff it... Rod put a few hours into the crew cab project. Gapped the left rear door and installed the cab corner. Work on the passenger side is well on its way.

Engine and trans removed from Dean's 75. Frame is in Killam at our friends at Flagstaff Collision to give it some attent...
08/01/2026

Engine and trans removed from Dean's 75. Frame is in Killam at our friends at Flagstaff Collision to give it some attention due to the rollover. Parts are on order, waiting to come in. Finished up Kevin's 3500 and added some black out trim. Really makes is stand out. UPS gave us the shaft, waiting for our booth filters, ero, painting has been on hold. Not impressed...Highlight of last week was seeing Dirk's Panel Truck in the Bruce Stampede Parade!

The Year of the Square continued this week. Saw Dean's '75 Wednesday afternoon. We enlisted the help of Rowan and Keel...
07/25/2026

The Year of the Square continued this week. Saw Dean's '75 Wednesday afternoon. We enlisted the help of Rowan and Keelor to get it blown apart. Floors are in tough shape, parts are on order. Factory Big block, Factory Air, tilt and a slider, all numbers matching!

Mask, epoxy and Raptorliner on the undersides of a bunch of Larry's panels for the 48 GMC. Only things left are the fron...
07/24/2026

Mask, epoxy and Raptorliner on the undersides of a bunch of Larry's panels for the 48 GMC. Only things left are the front fenders, which we will get into final prime first, and the cab as well. Since we will be getting some green on next week, we washed down the booth and repainted the walls. Nice and bright now!

Didn't get a crew cab update last week, here you go. We fit the orginal 78 clip, which is in amazing shape by the way, ...
07/18/2026

Didn't get a crew cab update last week, here you go. We fit the orginal 78 clip, which is in amazing shape by the way, to the newer cab and low and behold, almost perfect gaps, fenders to doors...fit the inners and adjusted the door corners as well. Twice as hard as a job with twice the doors..haha!

Relief cuts in the hood of the 48 GMC to get it to fit tighter to the cowl. All done, we will fit it back on the truck ...
07/17/2026

Relief cuts in the hood of the 48 GMC to get it to fit tighter to the cowl. All done, we will fit it back on the truck next week. Finished up the passenger side bed filler as well.

A good friend had a mishap with his fifth wheel on his brand new truck. He was fortunate enough to find a brand new box, for less than the cost of a box side...Enter the crew with the swap over, the colour is a perfect match! We did have to redo the tailgate. They will be joined up next week!

Reshaped bed fillers on Larry's truck to hide the ugly gap between it and the lower cab runner seals. Vast improvement,...
07/11/2026

Reshaped bed fillers on Larry's truck to hide the ugly gap between it and the lower cab runner seals. Vast improvement, one side done, other side about half way there. Hung the panels on the Pace Car project, looks nice and tight! Shad brought down the drive train Friday afternoon a little touch up painting to do and we will make it a roller!

Address

5014 49street
Daysland, AB
T0B1A0

Opening Hours

Monday 8am - 5pm
Tuesday 8am - 5pm
Wednesday 8am - 5pm
Thursday 8am - 5pm
Friday 8am - 5pm

Website

Alerts

Be the first to know and let us send you an email when Greasy D's Rod & Kustom posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Greasy D's Rod & Kustom:

Shortcuts

Share

Category