Tech Works Engineering Inc

Tech Works Engineering Inc We Build the Best NA and Turbo Engine/Exhaust components for Subarus on the Planet.

Was wondering when someone with deep enough pockets was going to address the EJ heads. They look like the real deal.
12/17/2022

Was wondering when someone with deep enough pockets was going to address the EJ heads. They look like the real deal.

E85 specials for the 2.5i Subaru. 13:1 Compression.
04/11/2018

E85 specials for the 2.5i Subaru. 13:1 Compression.

Small primary 4-2-1 header with the titanium turbo coating for 2.5 imprezas with the AVO turbo kit.
04/16/2017

Small primary 4-2-1 header with the titanium turbo coating for 2.5 imprezas with the AVO turbo kit.

Air pump delete block off plates include all hardware and gaskets shown.
06/03/2016

Air pump delete block off plates include all hardware and gaskets shown.

Air pump delete block off plates
06/03/2016

Air pump delete block off plates

New batch of nitride treated cranks just arrived. We have center thrust JDM. USDM 2L and of course, 2.5L all in stock.
06/03/2016

New batch of nitride treated cranks just arrived. We have center thrust JDM. USDM 2L and of course, 2.5L all in stock.

05/15/2016
Everyone needs a little balance in their life......
05/15/2016

Everyone needs a little balance in their life......

Coarse bore finishes for break in are a thing of the past. Side note: the angle of cross hatch dictates the rate of ring...
04/14/2016

Coarse bore finishes for break in are a thing of the past.
Side note: the angle of cross hatch dictates the rate of ring rotation. This why the orientation of your çompression rings end gap is not quite as critical as some would have you believe.

102.1mm custom Tech Works Engineering designed stroker piston, made to suit our custom 84mm crankshaft. Based on a Wisec...
04/13/2016

102.1mm custom Tech Works Engineering designed stroker piston, made to suit our custom 84mm crankshaft. Based on a Wiseco forging, with Top Gun Coatings moly skirt coating.

Weighs in at 395.7grams.

2.0L JDM Wiseco piston for a customer's build came in today. Shiny stuff is pretty stuff.
03/29/2016

2.0L JDM Wiseco piston for a customer's build came in today. Shiny stuff is pretty stuff.

Address

76th Avenue NW
Calgary, AB
T6C0K1

Telephone

+14032190085

Website

Alerts

Be the first to know and let us send you an email when Tech Works Engineering Inc posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Shortcuts

Share

Category