Accurate Mechanical & Welding

Accurate Mechanical & Welding Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Accurate Mechanical & Welding, Truck Repair Shop, 97 Prairie Place Southeast, Calgary, AB.

🔹 CVIP Licensed Inspections 🔹 24/7 On-Call Mobile Repair & Welding 🔹 Commercial Truck & Trailer Service 🔹 Heavy Equipment & Hydraulic Repairs 🔹 Structural & Custom Steel/Aluminum Fabrication📞 Office: 403-243-1717 | 📍 SE, 97 Prairie Pl, Calgary

❄️ Don't Let Winter Stall Your Rig!Winter weather hits hard, and the last thing you want is to be stuck on the side of t...
08/20/2026

❄️ Don't Let Winter Stall Your Rig!
Winter weather hits hard, and the last thing you want is to be stuck on the side of the highway with a frozen line or a dead battery.

When should you prepare?
The best time to winterize your truck is right now (September/October)—well before the first hard freeze hits. If you wait until the snow is falling, you’re already behind!

Let Accurate Mechanical & Welding get you winter-ready. Here is what we can handle for you:

Coolant & Antifreeze Checks: We'll test your protection levels and perform flushes if needed.

Battery & Electrical Testing: Cold weather kills weak batteries. We'll make sure your system can handle the cold starts.

Air System Maintenance: We'll service your air dryer cartridges and check for moisture to prevent frozen brake lines.

Block Heaters: Inspection of existing cords and heaters, or full installations if you need a new one.

Winter-Weight Oil Changes: Keep your engine running smooth with the right viscosity for dropping temperatures.

Fuel System Prep: Checking and replacing fuel water separators to prevent gelling.

Don't wait for the deep freeze! 📞 Call us today or drop by the shop to schedule your winter prep service and keep your wheels turning all season long.

🔧 Wrench Wednesday: The $50 Part That Can Cost You $5,000Fleet managers, when was the last time your team inspected your...
08/19/2026

🔧 Wrench Wednesday: The $50 Part That Can Cost You $5,000

Fleet managers, when was the last time your team inspected your truck's coolant hoses and clamps?

A minor, pinhole leak in a radiator hose can lead to rapid engine overheating, a blown head gasket, or a seized motor out on the highway—turning a simple $50 preventative fix into a $5,000+ dealership towing and repair bill.

💡 Pro Tip: Don't just look for leaks. Have your drivers squeeze the hoses during pre-trip inspections. If they feel soft, spongy, or excessively brittle, it’s time to swap them out before they split under pressure.

Need a fast mid-week inspection or a diagnostic check to keep your trucks on the road? Bring them by the bays at Accurate Mechanical & Welding.

📞 Call us at (403) 243-1717 or visit amwi.ca to book.
📌 Located at 97 Prairie Place.

🚧 Excavator Operators & Fleet Managers: Protect Your HydraulicsThe fastest way to lose thousands of dollars on a job sit...
08/18/2026

🚧 Excavator Operators & Fleet Managers: Protect Your Hydraulics
The fastest way to lose thousands of dollars on a job site isn't a bad weather day—it's a blown hydraulic pump.

Our Top Preventative Tip: Take 60 seconds to wipe down your grease zerks before attaching the gun, and visually inspect your cylinder wipers every morning. Pushing job site dirt directly into your hydraulic system is the #1 cause of premature valve and pump failure. Keep the dirt out, and the machine runs.

When things do break, why trust Accurate Mechanical & Welding?

🚜 On Your Job Site (Mobile Service): Don't pay for a lowboy transport just to fix a cracked boom or a blown hose. Our 24/7 mobile heavy-duty mechanics and fully equipped welding rigs come directly to your site to get your excavator digging again immediately.
🏢 In Our Calgary Shop: For major overhauls, our 9-bay facility handles the heavy lifting. We perform deep computer diagnostics, full engine rebuilds, and preventative maintenance tracked by our advanced fleet software so nothing falls through the cracks.

Whether you are in the dirt or need a major overhaul, we have you covered.

📍 Save our number for your next emergency or call us today to schedule your preventative fleet maintenance! (403)243-1717

🚐 Motorcoach Owners & Fleet Managers: Is Your Rig Ready for the Road?When you are transporting passengers on long hauls,...
08/17/2026

🚐 Motorcoach Owners & Fleet Managers: Is Your Rig Ready for the Road?

When you are transporting passengers on long hauls, a breakdown isn't just an inconvenience—it's a reputation killer.

Our top advice before a busy season? Never skip the pre-trip air suspension and air brake checks. These heavy-duty systems take a massive beating. Catching a minor valve leak or suspension issue in the shop prevents a major, costly breakdown on the highway.

Why trust Accurate Mechanical & Welding with your coach?

🔧 Heavy-Duty Expertise: We aren't just a standard auto shop. From advanced computer diagnostics to custom structural welding, we specialize in the big stuff.
💻 Proactive Tracking: We utilize state-of-the-art maintenance software to track your specific vehicle’s repair history, ensuring preventative work never falls through the cracks.
⏱️ Minimized Downtime: We know your coach only makes money when it's rolling. Our expert Heavy Duty Mechanics get the job done right and get you back in service safely.

Don't wait for a warning light.
📍 Call the shop today to book your repair today! (403)243-1717

🚀 Join the Crew at AMWI: We Are Expanding!AMWI is growing, and our shop is busier than ever. We are currently looking fo...
08/13/2026

🚀 Join the Crew at AMWI: We Are Expanding!
AMWI is growing, and our shop is busier than ever. We are currently looking for hard-working, reliable individuals to fill three key roles on our team. Whether you are spinning wrenches, driving sales, or keeping the shop running smoothly, we have a spot for you if you are ready to put in the work.

We offer competitive pay, a solid work environment, and the opportunity to grow with a busy shop.

🔧 Open Positions
2nd or 3rd Year Apprentice Mechanic (Auto or Heavy Duty)
What You Will Be Doing: Performing preventative maintenance, assisting with heavy-duty and automotive repairs, fluid and filter services, and tackling diagnostics alongside our senior techs.
What You Need to Bring: Registered 2nd or 3rd-year apprentice status, your own basic hand tools, a strong work ethic, and a valid driver's license.

Sales Representative
What You Will Be Doing: Driving new business, building relationships with local fleets and clients, quoting jobs, and helping to keep the schedule full.
What You Need to Bring: Proven sales experience (an automotive, heavy equipment, or trades background is a massive asset), strong communication skills, and a self-starter attitude.

General Shop Labourer
What You Will Be Doing: Keeping the shop floor safe and efficient. Duties include shop cleanup, parts running, assisting mechanics with heavy lifting, and basic prep work.
What You Need to Bring: A valid driver's license, reliability, the ability to lift heavy objects, and a willingness to get your hands dirty.

📩 How to Apply
Ready to get to work?
Please send your resume and a brief message letting us know which position you are applying for to [email protected].

Only successful candidates will be contacted for an interview.

🚛 Is Your Truck Drifting on the Highway? Don't Ignore Loose Steering! 🛣️If you’re feeling extra play in your steering wh...
08/12/2026

🚛 Is Your Truck Drifting on the Highway? Don't Ignore Loose Steering! 🛣️
If you’re feeling extra play in your steering wheel or having to constantly correct your line, your truck is trying to tell you something. Loose steering isn't just annoying—it’s a major safety risk when you're hauling heavy loads.

Here are a few quick tips if you're experiencing steering issues:
🔹 Check your tire pressure: Uneven or low pressure can mimic steering issues.
🔹 Listen for clunks: Popping or clunking sounds when turning often point to worn tie rods or a failing steering gear.
🔹 Check your power steering fluid: Low fluid or a dying pump can make steering feel inconsistent or "mushy."
🔹 Get an alignment check: Potholes and rough roads take a toll on your front end over time.

Why Choose AMWI to Fix It? 🛠️
At AMWI, we know that if your truck isn’t on the road, you aren't making money.
✅ Heavy-Duty Expertise: We specialize in semi-trucks and heavy equipment. We know exactly where to look to diagnose front-end issues fast.
✅ Minimized Downtime: We pride ourselves on fast, accurate diagnostics and efficient repairs to get you back hauling safely.
✅ Quality Parts: We only use heavy-duty, commercial-grade parts designed to withstand the miles ahead.

Don't wait for a small steering pull to turn into a breakdown on the side of the highway. Bring it to a shop you can trust.

📞 Call us today to get your front end inspected: (403) 243-1717

🚛 Is your rig trying to tell you something? Don't ignore the noise!As a driver, you know exactly how your truck should s...
08/09/2026

🚛 Is your rig trying to tell you something? Don't ignore the noise!
As a driver, you know exactly how your truck should sound. When that rhythm changes, it’s usually your first warning that trouble is brewing under the cab or trailer.

Here is a quick breakdown of what those new noises might mean:

🔊 Loud Hissing: Usually points to air system leaks (valves, lines, or air bags). Don't wait on this, or you risk compressor burnout or loss of braking power.

🔊 Heavy Engine Knock: This is a red flag for internal engine wear or failing fuel injectors. Ignoring it can quickly lead to catastrophic, expensive engine failure.

🔊 High-Pitched Whine: Often caused by turbocharger bearing wear or a charge-air leak. This will give you a massive loss of pulling power and ruin your fuel economy.

🔊 Metal-on-Metal Grinding: Usually means worn brake shoes chewing into the drums, or bad wheel bearings. This leads to dangerous stopping distances and ruined, costly brake hardware.

🔊 Driveline Clunking: A sign of worn U-joints or carrier bearings shifting under torque. If pushed, you could drop a driveshaft in the middle of a heavy haul.

Why bring that noise to Accurate Mechanical & Welding? 🛠️
We don't just guess and throw parts at a sound. Our heavy-duty technicians take the time to run proper diagnostic reports to find the exact root cause of the issue. We know that in the trucking industry, your downtime is lost money. We pride ourselves on transparent communication, getting the repair done right the first time, and getting you back on the highway safely.

If your truck is making a sound that isn't the radio, let us take a look before your next dispatch!

📍 Call us a message today to get booked in. (403)243-1717

🚛 Just finished a grueling long haul? Your rig has been working overtime.Long-haul routes put immense strain on your sem...
08/09/2026

🚛 Just finished a grueling long haul? Your rig has been working overtime.
Long-haul routes put immense strain on your semi-truck. After thousands of miles, even the toughest rigs take a beating. Here is what’s happening under the hood:

Fluid Degradation: Extreme operating temperatures break down your engine oil, transmission fluid, and coolant, stripping away their protective properties.

Suspension & Alignment Stress: Constant vibrations, potholes, and uneven highways wear down shocks and bushings, and throw off your alignment—which can quickly eat through expensive tires.

Brake Fatigue: Mountain passes and heavy loads take a massive toll on your air brakes, pads, and drums.

Filter Clogs: Your air, fuel, and DPF filters have been working overtime catching dust and impurities, which can restrict airflow and ruin your fuel economy.

Why bring it to Accurate Mechanical & Welding? 🛠️
We know that in this business, downtime costs you money. Our expert technicians specialize in heavy-duty repairs and thorough preventative maintenance—including our top-tier semi-truck oil changes. We don't just do a quick visual check; we dig into the critical systems that take the hardest hits during long hauls. We catch the small issues before they become expensive breakdowns on your next dispatch.

Don't wait for a warning light. Message us today or call the shop to book your post-haul inspection and let us get you back on the road safely! 📞

Spotted a puddle under your rig? Don’t ignore it! 🛑🚛Different colored leaks mean different things for your semi-truck. H...
08/07/2026

Spotted a puddle under your rig? Don’t ignore it! 🛑🚛

Different colored leaks mean different things for your semi-truck. Here is a quick cheat sheet to help you identify what’s going on underneath your truck:

🖤 Black or Dark Brown: Engine Oil. It might be time for a change or a sign of a leak in the gasket or seal.
❤️ Red: Transmission Fluid or Power Steering Fluid. Don't risk rough shifting or steering loss—get this checked immediately!
💚 Green, Orange, or Pink: Coolant / Antifreeze. A leak here means you are risking a blown engine from overheating.
💛 Amber / Clear (with a strong smell): Diesel Fuel. This is a major safety hazard and hurts your fuel economy.
💧 Clear & Odorless: Just water condensation from your A/C. You are good to go!

Why choose Accurate Mechanical & Welding to fix it? 🛠️
We know that downtime costs you money. Our expert heavy-duty mechanics have the tools, the experience, and the drive to diagnose your leaks quickly and fix them right the first time. We specialize in semi-truck maintenance and repairs, ensuring your rig gets back on the road safely and efficiently.

Don't let a small leak turn into a massive breakdown. Give us a call today to get it sorted out! 🔧 (403)243-1717

Address

97 Prairie Place Southeast
Calgary, AB
T1X0K2

Opening Hours

Monday 7am - 5pm
Tuesday 7am - 5pm
Wednesday 7am - 5pm
Thursday 7am - 5pm
Friday 7am - 5pm

Telephone

+14032431717

Website

Alerts

Be the first to know and let us send you an email when Accurate Mechanical & Welding posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Accurate Mechanical & Welding:

Shortcuts

Share

Category