IssyFab Speed LTD.

06/16/2026

Thank you to everyone who donated. We’d really like to make this a regular thing for our cars and coffee events going forward. These are wonderful people doing great things.

So thankful for our friends at IssyFab Speed Ltd. Many full, happy bellies will be had! ❤️🐾

If you are looking for a great Sunday morning activity for the whole family, stop out to their Princeton location, 62 Main St., July 5th for their monthly "Cars and Coffee"!

06/11/2026

Lots of sheet metal flying through the shop lately. Both Tom’s Parisienne and Phil’s S10 making leaps and bounds. Dylan is finishing up the trunk panel and matching up the super deep factory beads in the Pullmax. Then we can (finally) start metal work on the exterior of the car and Jessie’s creeping up on having all the major paneling built for the box before we start the floor and bead work.

06/02/2026

We’re now just days away from our first Cars and Coffee since October of 2024! Come check out the projects we’ve got on the go, the shop layout has totally changed, the lot is now paved and we’re putting coffee and treats out as always. Don’t forget we’re also accepting donations this year for .animalrescue and info for that is on slides 5 and 6. Can’t wait to see you all again! Come early, it’s going to be busy. Also, as always, we have zero tolerance for nonsense. This is a small community and it is everyone else’s Sunday as well. Don’t wreck it for us or them. 62 Main St S, Princeton. 9am to noon.

05/25/2026

Box V2.0 update number 1. Let’s preface this by saying sectioning a factory step side box into being a “mini dually” box is no small feat (when done properly). Jessie has so far widened the factory box footprint about 4” per side, sectioned out about 3/8” in the box side to sit the height correctly with the factory body line and the back of the cab. Fabricated fill panels where the stock plastic body flare would’ve been and tightened the gap at the front with hammer formed caps. This will more than likely get more work once we attack the front wall of the box. But so far so good. Some small work required at the back of the cab to match this all up as well. But the vision is taking shape.

05/19/2026

62 Main St S, Princeton. Sunday June 7th 9am to noon! Come on out for our first cars and coffee of 2026. First Sunday of every month to follow! Once again reminding you to please respect the town as it is everyone else’s Sunday as well.

05/11/2026

Jessie working on hammering in some body lines on the box extension fillers for S10.

05/04/2026

Working away at getting miles of stainless hardline at home in the Parisienne chassis. Helps when the floor isn’t really attached.

01/28/2026

We were commissioned to recreate some window pieces for a client for his project car. We live in a wonderful time for hot-rodding where things like this are easier and cheaper than ever.

01/20/2026

Is it spring yet? We’re getting anxious to get some miles on this old Caddy.

09/25/2025

We’ve got a new project in the shop that we will post later, but we’ve been working behind the scenes on disassembling the car, prepping for metal work and designing the new chassis based with new Pro Spindle. This one will be a riot.