Clicky

Spencer's Autobody

Spencer's Autobody Spencer's Autobody is Central Alberta's top autobody service and repair shop.

Operating as usual

Little more progress on this 2001 Dodge Ram restoration. 4 coats of black base coat and 3 coats of clear. This one is tu...
12/27/2022

Little more progress on this 2001 Dodge Ram restoration. 4 coats of black base coat and 3 coats of clear. This one is turning out really nice.

Changing out the front fenders on this rusty 2001 Dodge. This was the worst engineering design ever!  The new fenders do...
12/16/2022

Changing out the front fenders on this rusty 2001 Dodge. This was the worst engineering design ever! The new fenders don’t come with Inner fenders attached you have to drill out all the spot welds and reinstall. We thought we would give our silicon bronze welder, a try, also known as mig brazing. Half the heat distortion of normal Mig wire and better corrosion resistance. Finished up with a black corrosion primer and off to paint.

Cab corner install on the rusty Dodge Ram no welding required. We are really happy how these turned out. Next up install...
12/15/2022

Cab corner install on the rusty Dodge Ram no welding required. We are really happy how these turned out. Next up install new fenders and repair rusty door lowers.

We just got started with the body restoration on this very rusty 2001 Dodge Ram. We will be installing new rocker panels...
12/13/2022

We just got started with the body restoration on this very rusty 2001 Dodge Ram. We will be installing new rocker panels, cab corners, and door lowers. No welding required all panel bonding glue. The original rocker panels were spot welded from the factory. Two layers of bare metal sandwiched together with spot welds that’s exactly where it rusted out. The way we do it two layers of bare metal with glue in between that dries like concrete It can’t rust in that area now.

We have noticed these newer trucks not even 2 years old with painted bumpers are covered in rock chips and starting to r...
12/06/2022

We have noticed these newer trucks not even 2 years old with painted bumpers are covered in rock chips and starting to rust already. No paint seems to hold up not even Endura. We finally found something that does raptor box liner ! Lots of people don’t like the box liner look so we spray it through a paint gun to give it smoother finish. This one turned out great !

Previous repair someone did with Bondo way too thick. It was cracking and falling out and rusting so we pulled the dent ...
11/16/2022

Previous repair someone did with Bondo way too thick. It was cracking and falling out and rusting so we pulled the dent with our Uni spotter dent puller did some heat shrinks and fixed it properly. This one turned out nice with a perfect color match !

We just finished up spraying raptor smooth finish box liner on these 2006 H2 Hummer bumpers. 10X stronger then paint and...
11/10/2022

We just finished up spraying raptor smooth finish box liner on these 2006 H2 Hummer bumpers. 10X stronger then paint and a nice smooth textured finish.

Rusty wheel well replacement on this  we glued in metal with  rust repair on tailgate and back bumper. We also gave the ...
10/27/2022

Rusty wheel well replacement on this we glued in metal with rust repair on tailgate and back bumper. We also gave the whole truck a hand wax with This one turned out great !

Finished up some spot repairs on this jeep bumper they turned out great !
10/14/2022

Finished up some spot repairs on this jeep bumper they turned out great !

Nasty little dent on this Ford super duty ! But we managed to pull it out with the UNI Spotter. This one turned out grea...
08/11/2022

Nasty little dent on this Ford super duty ! But we managed to pull it out with the UNI Spotter. This one turned out great !

Sprayed textured raptor bed liner on these 1997 Chevy bed rails. We are happy with the finish !
08/09/2022

Sprayed textured raptor bed liner on these 1997 Chevy bed rails. We are happy with the finish !

This was a small job but it looks way better now.
08/03/2022

This was a small job but it looks way better now.

Flat white single stage went down on these 1967 Chevy truck parts. They turned out great !
07/28/2022

Flat white single stage went down on these 1967 Chevy truck parts. They turned out great !

Swapping out these rusty doors for some rust free silver ones. We just had to put a coat of white paint on them first ! ...
07/22/2022

Swapping out these rusty doors for some rust free silver ones. We just had to put a coat of white paint on them first ! Glasurit 22 line our favourite paint !

Just finished up this two tone paint job on this little North Star toy truck. Base coat clear coat it turned out nice ! ...
07/20/2022

Just finished up this two tone paint job on this little North Star toy truck. Base coat clear coat it turned out nice !

Just finished up this Ram. It had a rusty rock chipped rear bumper and damaged front bumper. We bought a new black prime...
07/15/2022

Just finished up this Ram. It had a rusty rock chipped rear bumper and damaged front bumper. We bought a new black primer OEM front bumper and sand blasted the rear bumper. Finished it off with 5 coats of yellow and 3 coats of clear coat. Another perfect color match with our color camera. This one turned out great

Just finished repairing a broken step on this camper van. It’s way stronger now with metal plates on the underside  3m g...
06/28/2022

Just finished repairing a broken step on this camper van. It’s way stronger now with metal plates on the underside 3m glue and fibreglass. Another great color match with our color camera. This one turned out great!

We just finished up repairing a scratch/dent on this 2008 GMC box side and rock Chipped front bumper. Another great colo...
06/14/2022

We just finished up repairing a scratch/dent on this 2008 GMC box side and rock Chipped front bumper. Another great color match with our color camera.

The mud flap on this 2018 ram got loaded up with mud on may long weekend and did this to the fender. We replaced the fen...
06/10/2022

The mud flap on this 2018 ram got loaded up with mud on may long weekend and did this to the fender. We replaced the fender with a new OEM and repaired some chips on the door.

Just finished up this one a small dent that cracked the paint on this newer Ford truck. Metallic black Basecoat clearcoa...
06/07/2022

Just finished up this one a small dent that cracked the paint on this newer Ford truck. Metallic black Basecoat clearcoat. It turned out great !

We just finished up repainting peeling paint on this Fendt tractor hood. Whatever clear coat Fendt uses sure is thick bu...
06/03/2022

We just finished up repainting peeling paint on this Fendt tractor hood. Whatever clear coat Fendt uses sure is thick but didn’t stick very well. Another great color match thanks to our color camera.

Has anyone noticed how 2 year old trucks have rock chipped front bumpers that are already starting to rust and the deale...
06/01/2022

Has anyone noticed how 2 year old trucks have rock chipped front bumpers that are already starting to rust and the dealerships/manufacturer won’t warrantee it ? Well this customer requested a repaint with black epoxy on the inside and base coat clear coat with 4 coats of Endura industrial clear. Other then the 1 hr wait time in between coats we were impressed how it turned out.

We just finished up repairing some dents and factory paint peeling on this Yukon Denali. The red pearl metallic tri coat...
05/31/2022

We just finished up repairing some dents and factory paint peeling on this Yukon Denali. The red pearl metallic tri coat was a tuff one to match but we got it spot on with the help from our new color camera.

We finished up this Chevy door that got opened to far overextended and bent the hinges. It was a bit of a challenge but ...
05/25/2022

We finished up this Chevy door that got opened to far overextended and bent the hinges. It was a bit of a challenge but we corrected the wind noise which was the customer‘s biggest complaint.

We just finished up this deer hit for Intact Insurance on this Toyota FJ Cruiser. It wasn’t a massive job but it took 2 ...
05/17/2022

We just finished up this deer hit for Intact Insurance on this Toyota FJ Cruiser. It wasn’t a massive job but it took 2 months for all the parts to come in from Toyota. We are happy with how it turned out.

We finished up repairing a dent on this 2020 Ford Super duty fender kept it small by doing a melt down. This one turned ...
05/06/2022

We finished up repairing a dent on this 2020 Ford Super duty fender kept it small by doing a melt down. This one turned out great.

We are now offering Raptor liner coatings it’s a great product available in any color. We sprayed a front bumper of a tr...
04/29/2022

We are now offering Raptor liner coatings it’s a great product available in any color. We sprayed a front bumper of a truck 3 years ago and his holding up great still. We are very confident with this product.

We just finished up this nasty little dent on this 2014 Chevy. It was quite a bit of work but it turned out nice.
04/26/2022

We just finished up this nasty little dent on this 2014 Chevy. It was quite a bit of work but it turned out nice.

Rust for days on this 2015 Ford Expedition. Installed new glue in rocker panels and coated them with Raptor box liner. T...
04/22/2022

Rust for days on this 2015 Ford Expedition. Installed new glue in rocker panels and coated them with Raptor box liner. They will be better than new. Spot repair painting on factory paint peeling , aluminum corrosion on trunk hatch and finished it off with a full power polish.

We just finished up another rusted wheel well Chevy. The repair panel it’s overlapped over the existing metal by 3 inche...
04/13/2022

We just finished up another rusted wheel well Chevy. The repair panel it’s overlapped over the existing metal by 3 inches using Fusor 112B panel bonding adhesive. Using a metal bonding glue instead of welding = No warping or further corrosion. A second coat of 3M 08115 is applied a light coat of body filler then primer and paint. The factory design flaw of the inner wheel well holding wet mud is corrected allowing it to drain. This one turned out great with a perfect colour match.

Just finished up repairing and painting this John Deere lawnmower. We sandblasted all the metal parts fibreglass repair ...
04/11/2022

Just finished up repairing and painting this John Deere lawnmower. We sandblasted all the metal parts fibreglass repair on the hood. It turned out not to bad !

We finished up some spot repairs on this newer Chevy truck. Dented in roof we kept all the repairs small and did meltdow...
04/08/2022

We finished up some spot repairs on this newer Chevy truck. Dented in roof we kept all the repairs small and did meltdowns. The next day we power polish everything it turned out great.

We just finished up painting this old Chevy truck cab. We tried a new satin white paint it turned out nice.
04/06/2022

We just finished up painting this old Chevy truck cab. We tried a new satin white paint it turned out nice.

Just finished up painting this fuel tank for a customer. 2 tone Dodge truck torch red and Dodge grey metallic. It turned...
03/25/2022

Just finished up painting this fuel tank for a customer. 2 tone Dodge truck torch red and Dodge grey metallic. It turned out great.

Fixing some damage on this aluminum ford box. 2 coats of glasurit 22 line paint and 1 coat of clear it’s going to look g...
03/21/2022

Fixing some damage on this aluminum ford box. 2 coats of glasurit 22 line paint and 1 coat of clear it’s going to look great.

Fixing up another Dodge with rusty wheel wells. No welding required ! We glue in the repair panel with 3M panel bonding ...
03/11/2022

Fixing up another Dodge with rusty wheel wells. No welding required ! We glue in the repair panel with 3M panel bonding glue. We’re having great luck with this method. This PR4 red pearl coat paint turned out great with a perfect color match.

We Fixed up these 1950 Chevy running boards. Gave them a sandblast body filled factory waves and dents. Then 3 coats of ...
03/08/2022

We Fixed up these 1950 Chevy running boards. Gave them a sandblast body filled factory waves and dents. Then 3 coats of Matrix black epoxy primer block sand and paint base coat clear coat with 5 star flat clear coat for protection. These running boards turned out great with the satin finish old-school look that the customer wanted.

Just swapping out this bumper cap on the 2021 Toyota. Sure is a good place the engineers put this module inside the bump...
03/04/2022

Just swapping out this bumper cap on the 2021 Toyota. Sure is a good place the engineers put this module inside the bumper. It looks like it’ll stand up well in a crash !

Trying out this new welder we just bought. Silicon bronze mig. Normal mig wire melts at 3000°F this bronze wire melts at...
03/03/2022

Trying out this new welder we just bought. Silicon bronze mig. Normal mig wire melts at 3000°F this bronze wire melts at 1700°F which means no warping of the metal. It’s gonna be great to try it out on full-size quarter panels on antique cars.

We just finished up this 2017 Equinox Deer hit. Lots of stuff gets destroyed when these new plastic vehicles hit a deer....
03/01/2022

We just finished up this 2017 Equinox Deer hit. Lots of stuff gets destroyed when these new plastic vehicles hit a deer. This one is all better now

Address

39521 Range Road 265
Blackfalds, AB
T0M0J0

Opening Hours

Monday 9am - 5pm
Tuesday 9am - 5pm
Wednesday 9am - 5pm
Thursday 9am - 5pm
Friday 9am - 5pm

Telephone

4033508923

Alerts

Be the first to know and let us send you an email when Spencer's Autobody posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to Spencer's Autobody:

Nearby autos & automotive services


Other Auto Body Shops in Blackfalds

Show All
x

Other Auto Body Shops in Blackfalds (show all)

Big Cat Customs Inc. Continental Paint & Collision Popow and Sons Body Shop LTD Autotech Collision & Frame Ltd FSK Paint & Collision Boyd Autobody & Glass First Choice Collision Scott's 180 Collision Fix Auto Canada Overkill Customs Caliber Paint & Body Precision PDR Ltd Red Deer Maaco - Auto and boat collision and repair CARSTAR Red Deer South Comfort Collision & Restoration