Jensanracing

Jensanracing Contact information, map and directions, contact form, opening hours, services, ratings, photos, videos and announcements from Jensanracing, Automotive Customization Shop, 6465 N Green Lake Road, Abbotsford, BC.

In the middle of rebuilding a 1981 928 after having moved. The car is fully repainted and all mechanicals rebuilt. Fully...
03/27/2022

In the middle of rebuilding a 1981 928 after having moved.
The car is fully repainted and all mechanicals rebuilt.
Fully rebuilt G28.05 and M28/15.
This is going to be a very fun car to drive.

08/20/2021

As most of you already know we will be moving up north and will have work right at home! Official move date expected Sept 15th

Put the GTS on the dyno today after the rebuild with custom pistons and rods.  The car has a 100% full factory exhaust a...
01/15/2021

Put the GTS on the dyno today after the rebuild with custom pistons and rods.
The car has a 100% full factory exhaust and factory chips in the brain.
Going through an untouched automatic transmission.
Dyno was a mustang unit.
RWHP 273.4
RW Ft Lbs 311.7
This car would really benefit from exhaust and camshafts. The curve was very flat from 5K up.

Please check out this 1992 928GTS on BaT that I am helping a client sell.
12/30/2020

Please check out this 1992 928GTS on BaT that I am helping a client sell.

Bid for the chance to own a 1992 Porsche 928 GTS at auction with Bring a Trailer, the home of the best vintage and classic cars online. Lot #41,420.

A 5L 16V engine that I put together for a customer in Alaska with a 1978 928. Video of it running in comments (wont let ...
12/10/2020

A 5L 16V engine that I put together for a customer in Alaska with a 1978 928.
Video of it running in comments (wont let me load videos and pictures in post).

Putting together a completely fresh engine for a 93 GTS. Custom Dyer's rods (way strong than stock, and cheaper than 2R ...
12/07/2020

Putting together a completely fresh engine for a 93 GTS.
Custom Dyer's rods (way strong than stock, and cheaper than 2R rods),
custom pistons (stock CR).
Original engine failed due to thrust bearing failure.

This is why you don’t let CIS cars sit.... 1975 911.
12/13/2018

This is why you don’t let CIS cars sit.... 1975 911.

Working on an 04 VW Phaeton with some transmission issues. The car would slam into gear when accelerating and then slipp...
06/29/2018

Working on an 04 VW Phaeton with some transmission issues.
The car would slam into gear when accelerating and then slipped.
This car has a ZF 5HP24 transmission.
We replaced the A clutch drum and F clutch piston which are two know failure points and had the valve body shipped off to be rebuilt.
The unit is now back together and we hope to have it back up and running at the end of the day today.

A video I did up last week regarding the VW hydraulic lifters for all gas and diesel engines using the VW lifters.
04/30/2018

A video I did up last week regarding the VW hydraulic lifters for all gas and diesel engines using the VW lifters.

This video pertains to the use of the black nitrided INA VW lifters. These lifters are commonly used in all newer turbo diesel VWs and are stated to be used ...

Address

6465 N Green Lake Road
Abbotsford, BC
V0X2K1

Telephone

+16048074523

Website

Alerts

Be the first to know and let us send you an email when Jensanracing posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Share