RaceFace Custom Parts

RaceFace Custom Parts Custom Performance Parts Изработка на перформънс части

Porsche torque plate been milled for our friends from J.P. Motis service Cyprus. 52mm thick made of AL 6061T6.J.P. Motis...
27/06/2025

Porsche torque plate been milled for our friends from J.P. Motis service Cyprus. 52mm thick made of AL 6061T6.
J.P. Motis are Porsche tuning and restoration specialists. As every time our work goes with passion to perfection.

Vol4 of pictures added 😀Brand new rear beam with additional mods New heat shield for the exhaust maniCopy of Peugeot sp...
03/03/2024

Vol4 of pictures added 😀
Brand new rear beam with additional mods
New heat shield for the exhaust mani
Copy of Peugeot sport Gr.A bitube exhaust, but made of titanium
Junction box with Souriau connectors in the engine bay
Various small details made of billet alu and sheet
New Bosch motorsport DBW milled to 70mm ID

Some billet titanium parts for rear calipers handbrake delete Peugeot 206 RC.Twice as light as stainless steel Peugeot S...
24/06/2023

Some billet titanium parts for rear calipers handbrake delete Peugeot 206 RC.
Twice as light as stainless steel Peugeot Sport original items.
Our passion led us to that level of attention to small details 😀

Nissan VG30DE(TT) from stock cam pulleys to vernier cam pulleys. Internal rings made of AL7075, hard black anodised, and...
06/05/2023

Nissan VG30DE(TT) from stock cam pulleys to vernier cam pulleys. Internal rings made of AL7075, hard black anodised, and laser etched. Ready for fine tuning :)

Vol 4 and a lot more to come 😀Details, installation and work…
28/11/2022

Vol 4 and a lot more to come 😀
Details, installation and work…

Vol 3 pics after powdercoat, anodizing, a lot of Raychem boots and sleves, some details in progress 😀 🔧🔩 ...
27/11/2022

Vol 3 pics after powdercoat, anodizing, a lot of Raychem boots and sleves, some details in progress 😀
🔧🔩

Vol 2 of our story of building rally car in pictures….You can see custom servo delete spacer made of billet, 3l oil catc...
27/11/2022

Vol 2 of our story of building rally car in pictures….
You can see custom servo delete spacer made of billet, 3l oil catch can built in front left end, Gr.A hydraulic fluid alu tank, reworked hydraulic clutch mechanism, Msel main kill switch and some more….
parts

Finally!!!It’s time to finish this project started a long time ago…Started in 2012…some slow progress till 2020 and… gen...
27/11/2022

Finally!!!
It’s time to finish this project started a long time ago…
Started in 2012…some slow progress till 2020 and… general changes…
New body shell with Matter Peugeot Sport roll cage…Sequential Gearbox from Bacci Romano specially developed for 206 Gr.A and a lot of custom parts and work and work and wiring 😀😎🤩
Exstensive use of carbon fibre parts, lightweight titanium and aluminum fasteners.
Now I will show you assembly in details 🫣
🔧🔩

8 years ago we milled first brake bell setup for VW Golf 4 kit car. After some track incident this year, we’ve managed t...
20/11/2022

8 years ago we milled first brake bell setup for VW Golf 4 kit car. After some track incident this year, we’ve managed to carve new set of bells with same proportions. Parts are not been polished just taken down from the machine. Made of AL7075 😀

Last order arrived in Friday, made us happy 😀😊🙃We received box full of Goodridge parts including G-Line XF910 hose and 8...
18/09/2022

Last order arrived in Friday, made us happy 😀😊🙃
We received box full of Goodridge parts including G-Line XF910 hose and 811 lightweight fittings.
We use and a lot of traditional 236 series with 210 black fibre braid.
Going to finish my friend project soon 🔜 🏎🏁

We had a special task to mill Ti rigid box supports for Peugeot 206 RC Gr.A rally car. Made from solid Titanium check th...
15/05/2022

We had a special task to mill Ti rigid box supports for Peugeot 206 RC Gr.A rally car. Made from solid Titanium check this out 🤓. 45% lighter than steel Peugeot sport unit and twice stronger.
Изработихме супорти за скоростна кутия Peugeot 206 RC Gr.A рали автомобил. Направени от титан, 45% по-леки от заводските, два пъти по здрави.

My new engine harness is ready to be installed now…😃After more than 60 working hours we’re ready. BIG thanks to for the...
24/03/2022

My new engine harness is ready to be installed now…😃
After more than 60 working hours we’re ready. BIG thanks to for the job been done❗️We created fully closed engine loom for my street project Subaru Impreza STI. Using right materials we have and right product at the end. Next mod soon ➡️➡️➡️

Address

Sofia
1220

Telephone

+359887455728

Website

Alerts

Be the first to know and let us send you an email when RaceFace Custom Parts posts news and promotions. Your email address will not be used for any other purpose, and you can unsubscribe at any time.

Contact The Business

Send a message to RaceFace Custom Parts:

Shortcuts

Share

Category